Lfxs24663s Parts

This Door Basket Assembly is the refrigerator door shelf bin that mounts to the inner door. Replacing a damaged bin restores secure, usable storage for condiments and bottles and helps prevent spills and items falling when the door swings.

• Mounts to molded tabs/slots on the door liner to provide shelf storage
• Keeps containers upright and reduces movement during door opening/closing
• Replace if cracked, has broken tabs, won't stay seated, falls off, or is missing
• Restores proper fit and organization on the door

• Empty and support the old bin; lift straight up and out from the door tabs
• Align the new bin with the slots and press down until fully seated
• Confirm the bin is level and locked in place before loading
• Allow cold plastic to warm to room temperature before installation to reduce risk of cracking

This LED light assembly illuminates the refrigerator interior when the door opens, delivering bright, efficient lighting so you can easily see items. Replace a failed module to restore proper visibility inside your fridge.

• Provides interior illumination for the fresh food or freezer compartment
• Turns on and off with the door switch
• Helps you quickly find items and check food condition
• Common symptoms: no light when doors open, flickering/strobing, dim or intermittent lighting

• Disconnect power to the refrigerator before servicing
• Remove any lens/cover, release retaining tabs, and unplug the wire harness to remove the old module
• Connect the new assembly, align tabs, and snap/secure it into place; reinstall the cover
• Restore power and verify operation; the door switch activates the light

This rail guide assembly supports and guides a sliding drawer/rack along its track so it opens and closes smoothly. Replacing a worn or broken guide restores proper alignment and motion, helping prevent sticking, jamming, or uneven travel.

• Supports and stabilizes the drawer/rack on its slide rail
• Helps ensure smooth, straight opening and closing
• Can address issues like binding, noise, or misalignment
• Replaces cracked, warped, or broken guide components

• Disconnect power and, if applicable, shut off water before servicing
• Remove the drawer/rack and retain any reusable hardware
• Install the new guide in the same orientation as the original
• Test movement for smooth travel before fully reassembling

This refrigerator door bin restores secure, convenient storage on the fresh food door. Replace a cracked or missing basket so condiments, jars, and beverages stay organized and easy to access with every open and close. What it does

• Mounts on the refrigerator door to hold bottles, jars, and small items
• Keeps contents from shifting during door movement
• Replaces a cracked, warped, or missing bin that won't stay seated
• Helps resolve issues like items falling off the door or reduced door storage

• 1 door bin (basket assembly)

• Remove the old bin by lifting up and pulling out; unload contents first
• Align the new bin's hooks with the door liner slots and press down until fully seated
• Verify the bin is securely engaged before loading; avoid overloading
• Wear cut-resistant gloves to protect hands during replacement

This refrigerator water tank holds a reserve of water inside the fresh food section so the dispenser delivers a steady, chilled flow. Replace the reservoir if it's cracked, leaking, or internally restricted.

• Stores and chills dispenser water inside the refrigerator
• Helps maintain consistent dispenser flow and pressure
• Damage can cause leaks under drawers or inside the fresh food compartment
• Kinks or blockages can reduce flow or stop water dispensing

• Unplug the refrigerator and shut off the household water supply; dispense water to relieve line pressure.
• Access the tank behind the crisper/deli area; note tubing routing and connection points before removal.
• For push-to-connect fittings, depress the collar to release lines; cut tubing square and fully seat when reconnecting, then perform a gentle tug test.
• Restore water and power, check all connections for leaks, and purge air by dispensing water.

An in-line union for appliance tubing, this tube connector joins two sections of plastic line to create a secure, leak-resistant connection in the water circuit, ideal for restoring flow after a repair, trim, or reroute. What it does:

• Connects two lengths of compatible plastic tubing to form a continuous run
• Helps maintain proper water delivery through the appliance's water system
• Can address leaks, drips, or loose/failed connections at a splice point
• Useful when replacing, shortening, or rerouting tubing during service

• 1 tube connector

• Disconnect power and shut off the water supply before servicing
• Cut tubing square; ensure ends are clean, round, and free of gouges
• Insert tubing fully into the connector until seated, then perform a gentle pull test
• Restore water and inspect all joints for leaks; use the connector size that matches your tubing's outer diameter

This tray cover assembly replaces a cracked or missing ice tray cover to keep ice protected and help the ice bin stack and slide correctly. It restores a clean seal and simple access to the ice storage area. What it does:

• Covers and protects ice in the ice bin from odors and debris
• Helps maintain proper alignment and sliding action of the ice bin
• Prevents spills and reduces ice melting caused by gaps or damage
• Commonly replaced when the cover is cracked, warped, or missing

• One tray cover assembly

• Disconnect power to the appliance before servicing to avoid injury
• Remove the ice bin and any remaining ice before installing the cover
• Handle plastic components carefully to avoid cracking; align tabs and slides before seating

This rail guide assembly replaces a worn or damaged guide that helps a drawer or shelf slide smoothly along its track. Restores proper alignment and reduces sticking or uneven movement for the affected compartment. What it does:

• Guides and supports the drawer/shelf along its track for smooth opening and closing
• Prevents sagging, binding, or misalignment that can cause sticking or noisy movement
• Keeps the drawer/shelf on its intended path to reduce wear on adjacent components
• Helps restore proper fit and operation after cracked, broken, or worn guide rails

• Disconnect power to the appliance before servicing electrical models; remove stored items from the drawer/shelf area
• Support the drawer/shelf while removing mounting hardware to avoid drops or damage
• Replace only the damaged guide; ensure proper seating on the track and secure fasteners per OEM guidance

This replacement door basket is a refrigerator door bin that restores storage space and organization for bottles, jars and small items. It fits into the door shelving system to keep items secure and accessible. What it does:

• Provides a molded shelf inside the refrigerator door to hold bottles, condiments and small containers
• Replaces cracked, broken or warped door storage that no longer secures items
• Restores proper spacing and containment so contents don't shift when opening or closing the door
• Matches OEM shape and mounting points for a direct-fit replacement when the correct part number is used

• One door basket

• Typically installs by sliding or snapping into the door track; no major disassembly required
• Handle the basket carefully to avoid stress on mounting tabs during installation
• Clean with mild detergent and soft cloth; avoid abrasive pads or harsh solvents that may dull or damage the surface
• If mounting tabs are damaged, replace mounting hardware or the damaged door trim as needed for a secure fit

This guide assembly is a replacement mounting guide that helps align and secure the TV's front panel and internal components to restore proper fit and reduce movement. It's a direct-fit part intended for OEM-style repairs. What it does:

• Holds and aligns the TV front bezel or panel for correct fit and finish
• Secures internal components to prevent shifting during use or transport
• Helps eliminate panel rattles, gaps, or misalignment caused by a damaged guide
• Restores proper assembly after impact or wear to improve appearance and stability

• One guide assembly

• Disconnect power and remove the TV from its stand before beginning
• Follow the TV service manual for safe disassembly and reassembly steps
• Keep track of screws and small parts; use proper tools and a soft work surface

This holder assembly bracket secures and aligns a small appliance component so it stays in place during normal use, restoring reliable fit and reducing noise or movement caused by a loose part. What it does

• Provides a stable mounting point for the associated component to prevent shifting or detachment
• Restores correct alignment for doors, panels, or internal modules that rely on the bracket
• Helps stop rattling, vibration noise, or intermittent contact caused by a broken or bent bracket
• Supports safe operation by keeping parts properly positioned within the appliance

• Basic hand tools are usually all that's required; follow the appliance service manual for access steps
• Disconnect power (and water, if applicable) before starting any repairs to avoid shock or injury
• Inspect adjacent fasteners and mounting surfaces; replace any stripped screws or damaged clips for a secure fit

This replacement door basket restores usable storage space on the refrigerator door so bottles, jars and small containers stay organized and secure. It replaces a cracked, broken or missing door bin to recover full door storage function. What it does:

• Provides a secure shelf on the refrigerator door for bottles, jars and other small items
• Prevents items from shifting or falling when opening and closing the door
• Replaces cracked, warped or missing door bins that no longer hold items safely
• Helps restore original door storage capacity and organization

• Remove all items from the door before installing to avoid spills or injury
• Most door baskets snap into molded mounts; align tabs and press until it clicks
• Inspect mounting clips for damage and replace if worn to ensure a secure fit
• No electrical work required; follow appliance manufacturer safety guidance when servicing

This tray/drawer liner provides the structural shelf for a refrigerator drawer, helping contain food and spills while supporting the sliding drawer assembly. It restores proper fit and a clean surface inside the drawer compartment. What it does:

• Replaces a cracked, warped, or damaged drawer tray so the drawer sits and slides correctly
• Holds deli items, fruits and vegetables, and loose containers to prevent spills
• Helps contain leaks and makes cleaning easier compared with a damaged liner
• Reduces drawer noise caused by a broken or misshapen tray

• One tray/drawer liner

• Remove all food and contents from the drawer before replacing the tray
• Slide the drawer fully out (follow owner's manual removal steps) and lift or unclip the old tray as required
• Seat the new tray fully in the drawer frame; verify smooth sliding before refilling