Lfxs24663s Parts

This tray assembly forms the Fresh Room shelf inside the refrigerator compartment, supporting the deli/cheese drawer below. Replacing a cracked or missing tray restores smooth drawer operation and stable, usable storage space in the fresh food section.

• Supports and levels the Fresh Room/deli drawer
• Provides a flat shelf surface above the compartment
• Ensures proper drawer glide and closure when seated correctly
• Common signs of failure: cracked or broken tray, damaged tabs, sagging shelf, drawer binding or misalignment

• Unplug the refrigerator and remove food items and the Fresh Room drawer before servicing
• Lift the front and slide the old tray assembly out of its supports; do not pry against the liner
• Align the new tray on the rear tabs/side rails and press down until fully seated and level; handle edges carefully and use gloves

This upper hinge assembly replaces the top door pivot on compatible refrigerators to restore proper door alignment and smooth opening. It helps keep the door level and seals evenly to prevent cold air loss and improve operation. What it does:

• Provides the pivot point that supports the top of the refrigerator/freezer door
• Restores proper door alignment when the door is sagging, rubbing, or not closing completely
• Reduces uneven gaps that can cause cold air leakage and frost buildup
• Works with the existing lower hinge and door components to re-establish smooth opening and closing

• One upper hinge assembly

• Disconnect power to the appliance before starting and remove food from the door area as needed
• Support the door while removing and installing the hinge to prevent dropping or damage
• Use the correct hand tools and follow torque recommendations from the manufacturer; avoid overtightening

This cover assembly replaces the rear cabinet panel of the TV to protect internal components and restore a finished appearance. It helps eliminate exposed circuitry and prevents debris from entering the chassis. What it does:

• Replaces a cracked, warped, or broken rear cabinet to restore structural protection
• Covers and secures the TV's internal boards and wiring to reduce risk of damage
• Stops rattling or buzzing caused by loose or damaged rear panels
• Improves appearance by replacing a scratched or discolored back housing

• Disconnect the TV from power and any input sources before beginning work
• Remove any stand or wall-mount hardware and keep fasteners organized for reassembly
• Handle the cover and TV internals carefully to avoid damaging components or connectors

This guide assembly secures and aligns internal TV components to keep the display and front panel stable during use. Replacing a damaged guide restores proper fit and reduces movement or rubbing that can affect the screen or bezel. What it does:

• Positions and supports the TV panel and adjacent internal parts for correct alignment
• Prevents panel flex, rubbing, and audible rattles caused by loose or broken guides
• Helps maintain an even bezel-to-screen gap and proper front-panel fit
• Restores mechanical stability after impacts or wear that crack or deform the original guide

• One guide assembly part as shown

• Disconnect power and fully remove the TV from its mount before starting
• Partial disassembly of the cabinet and removal of the front bezel/panel is typically required
• Handle the LCD/OLED panel carefully to avoid pressure marks or damage during installation
• Use the OEM fasteners and follow service manual orientation; test fit before final reassembly

This Main PCB Power Control Board Assembly is the refrigerator's primary electronic control that manages power distribution and key functions, restoring responsive controls and system operation when the original board fails. What it does:

• Regulates power to major refrigerator components and coordinates control signals
• Supports user interface, sensors, and compressor/defrost control circuits
• Common symptom: unit is unresponsive, display/control panel is blank or intermittent
• Common symptom: cooling cycles, compressor, or defrost behavior are erratic or stopped
• Can clear control-related error codes and restore normal operation when board is faulty

• One Main PCB Power Control Board Assembly

• Disconnect power to the appliance before removing or installing the board
• Handle the board by edges and avoid static-sensitive contact; use a grounding strap if available
• Confirm all connectors are fully seated and harnesses are routed as originally installed

A small protective cap that covers and protects a component connection or opening from dirt and moisture, helping maintain proper function and prolong component life. Simple replacement when the original cap is cracked, missing, or worn. What it does:

• Covers exposed fittings, terminals, or openings to keep out debris and moisture
• Helps prevent leaks or contamination at the sealed connection
• Restores a secure fit when the original cap is cracked, split, or degraded
• Commonly used where a small, removable protective seal is required

• Inspect mating surface and surrounding gasket/seal before installing; replace other damaged parts as needed
• Press the cap firmly into place until fully seated; no special tools usually required
• Wear gloves and disconnect power or water supply if working near energized or pressurized components

This cover assembly protects the appliance's printed circuit board from debris, moisture and accidental contact, helping preserve reliable control operation. It provides a secure enclosure that keeps the PCB mounted and shielded during normal use. What it does:

• Shields the control board from dust, moisture splash and foreign objects that can cause shorts or component damage.
• Keeps wiring and connectors routed and secured to reduce strain and intermittent connections.
• Helps maintain correct spacing and alignment of the PCB for reliable electrical contacts.
• Useful when the original plastic cover is cracked, warped, missing or allows board exposure.

• One cover assembly for PCB.

• Disconnect power to the appliance before beginning any service to avoid shock or damage.
• Handle the PCB and connectors carefully; avoid touching board components or bending traces.
• Align cover over the PCB and fasten with the original screws or clips; do not overtighten plastic fasteners.

This door foam assembly replaces the insulating foam inside the freezer door to help restore proper insulation and reduce temperature loss. It supports efficient cooling and helps prevent frost buildup when installed correctly. What it does:

• Replaces the internal insulating foam in the freezer door that reduces heat transfer
• Helps maintain steady freezer temperatures and reduces compressor runtime caused by insulation loss
• Can reduce frost buildup and interior condensation related to poor door insulation
• Useful when the door feels colder than the cabinet or shows visible damaged/crumbled foam

• Disconnect power to the appliance before starting any repair to avoid electrical hazards
• Door panel removal is typically required; follow OEM disassembly steps and retain screws/fasteners
• Handle foam carefully to avoid tearing; position evenly in the door cavity before reassembling
• If gasket or door seal shows wear, inspect and replace separately; this foam does not include the exterior gasket