Lfxs26596s Parts

This damper motor support replaces a broken or warped mount for the refrigerator's air damper assembly. It holds the damper motor and door securely so the system can meter freezer air into the fresh food compartment.

• Secures and aligns the air damper motor/door within the duct
• Helps ensure proper opening/closing of the damper to regulate airflow and temperature
• Damage can contribute to a warm or too-cold refrigerator and inconsistent temperatures
• May cause clicking or buzzing from the damper area or a visibly loose assembly

• Disconnect power to the refrigerator before servicing
• Access the damper behind the fresh food compartment duct/cover; remove shelves as needed
• Note wiring and orientation; transfer the existing damper motor and door to the new support and reuse fasteners
• Ensure the door moves freely and seals before reassembly; restore power and verify airflow

This grille assembly covers and protects the refrigerator fan while directing airflow for proper cooling. It replaces a cracked, broken or missing grille to restore airflow pathway and reduce noise caused by loose or damaged parts. What it does:

• Protects the evaporator/condenser fan from debris and contact
• Helps direct airflow for consistent cooling performance
• Reduces fan vibration noise when the original grille is broken or loose
• Restores the factory appearance of the cooling compartment

• Inspect surrounding clips and mounting tabs for damage before installing
• Handle tabs gently — plastic parts can be brittle with age
• Unplug the appliance or disconnect power before accessing internal panels
• If screws or retainers are missing, replace with OEM-equivalent fasteners

This Main PCB Assembly is the appliance's primary power and control board, replacing a failed main control to restore normal electrical control and responsive operation. Use it to address control-panel, power, or erratic operation issues. What it does:

• Regulates and distributes power to the appliance's control circuits and motors
• Interprets user inputs from the control panel and runs selected cycles or programs
• Stops or prevents operation when internal faults are detected, helping protect other components
• Helps resolve symptoms like no power, blank or unresponsive display, erratic operation, or failure to start

• Disconnect all power before service to avoid shock; verify unit remains de-energized
• Handle board by edges and avoid touching components; observe ESD precautions
• Some models require control panel removal or cabinet access; keep all fasteners and wire harness locations noted

This customized pin is a precision fastener that serves as a pivot or locating point within your appliance. It helps keep mating parts aligned and moving smoothly. Replace a bent, worn, or missing pin to restore proper operation. What it does

• Acts as a pivot/axle or locating pin between connected parts
• Maintains alignment to reduce wobble and uneven movement
• Supports smooth opening/closing or rotation at the joint
• Common signs it's needed: looseness, sagging or misalignment, scraping/squeaking at the pivot, or a visibly worn/bent/missing pin

• One customized pin

• Disconnect power (and shut off water supply, if applicable) before servicing
• Support the door/panel/assembly to remove load from the pin during removal/installation
• Note the orientation and order of any spacers, bushings, or washers and transfer them to the new pin
• Apply a light lubricant and verify smooth movement before restoring power

This replacement home bar door gasket creates an airtight seal around the refrigerator's beverage/access compartment to help maintain cold temperatures and reduce drafts and moisture buildup. What it does:

• Seals the home bar/door compartment to help keep cold air in and warm air out
• Reduces condensation, frost buildup and temperature fluctuations in the compartment
• Helps prevent spoiled items and improves cooling efficiency when functioning properly
• Addresses symptoms like visible gaps, air leaks, excess moisture, or a door that won't close tightly

• Clean the door channel and gasket seating area of debris and old adhesive
• Press the gasket evenly into the channel, working around the door to ensure full contact
• Test the door for an even seal and adjust as needed; unplug refrigerator only if required for access or safety

This small stopper installs in the refrigerator to limit the travel of a moving component and keep it securely in place. Replacing a broken or missing stopper prevents over-extension and helps maintain smooth, aligned operation.

• Limits the range of motion for a door, bin, or drawer to prevent over-opening or accidental removal
• Helps keep interior components aligned and operating smoothly
• Replace if cracked, missing, or deformed
• Common symptoms: drawer or bin slides out too far, door swings past normal range, or a broken plastic stop is found

• Disconnect power before servicing; remove or support the affected bin/drawer/door
• Note the old stopper's orientation and location before removal
• Transfer and reuse any original screws or clips if applicable
• Snap or fasten the new stopper in place and test for smooth movement

Damper motor support secures the damper motor assembly inside the refrigerator, keeping the air-control damper aligned so it opens and closes correctly. Replacing a damaged support restores proper airflow control and reduces noise. What it does:

• Secures and positions the damper motor assembly so the air-control damper moves smoothly.
• Keeps the motor and damper aligned to help prevent rattling, grinding, or loose motor noise.
• Supports consistent airflow between compartments to assist with even cooling.
• Resolve damper movement problems like the damper not opening or closing fully.

• Disconnect power to the appliance before starting work; remove food and shelves as needed for access.
• Remove the interior access panel to reach the damper assembly; handle plastic tabs and clips gently to avoid breakage.
• Align the motor and damper during reassembly and secure all fasteners; test damper operation before replacing panels and shelving.

The LG Ice Dispenser Assembly is an OEM component specifically designed for LG brand refrigerators that have automatic ice makers and dispensers. This assembly contains both the ejection shoot that directs ice cubes through the dispenser door as well as the electrical components that trigger ice ejection.  

Symptoms include:

• Ice cubes unable to dispense or get stuck inside  
• Repeated dispensing attempts not pushing out any ice
• Random dispensing of ice even when not activated
• Dispenser door issues like improper opening or closing

Causes of a bad dispenser assembly can include failure of individual solenoids, sensors or motors due to high usage over many years, or blocked ice transport pathways preventing dispensing.

The Fan Guide Assembly is an OEM component specifically designed for LG refrigerators equipped with rear evaporator fans. This assembly guides proper airflow within the refrigerator compartment.

Symptoms of a bad fan guide assembly include:

• Development of warm or cool spots inside fridge surfaces  
• Excessive frost or moisture buildup at specific locations
• Reduced temperature fluctuation stability 
• Abnormally loud fan operation sounds

Causes of failure can be damage allowing fan blade strikes, cracks reducing structural integrity over time, or accumulation of dust clogging air passages.  

Replace yours today with this genuine OEM LG assembly to maintain optimized cooling throughout storage areas. Smooth, balanced airflow preserves food freshness evenly. This replacement part is compatible with Frigidaire, GE, and Samsung models for factory fit and function. Proper air distribution helps maintain energy efficiency.

This center door hinge assembly replaces the pivot that lets a refrigerator door open and close smoothly, restoring proper door alignment and sealing. Designed to fit OEM mounting points for reliable operation and long-term use. What it does:

• Supports the center door pivot and maintains proper door alignment
• Enables smooth opening and closing of the affected door section
• Helps maintain an effective door seal to prevent cold air loss
• Commonly used when the door sags, binds, or makes noise at the hinge

• 1 center hinge assembly

• Installation requires removing the door and supporting it to prevent damage or injury
• Tighten mounting fasteners to the manufacturer's torque specifications; avoid over-tightening
• Disconnect power to the appliance and follow all safety precautions before beginning work

The Ice Maker Assembly Kit is an OEM part for LG refrigerators. This kit contains all the necessary components to replace the entire ice maker system, including the ice maker, ice storage bin, and required mounting brackets and hardware. 

Symptoms of a bad ice maker assembly include: 

• No ice production or very slow ice production
• Water line leaks or malfunctions  
• Ice crunching or cracking noises during the operation
• Ice jams or improper ice dispensing

Causes of failure can be normal wear over years of use, clogged or damaged components, or issues with the control board that regulates the ice-making process.

Replace yours today with this complete genuine OEM LG ice maker assembly kit to restore optimal ice production and prevent further damage. This replacement part is also compatible with Kenmore Elite, Samsung, GE, and some Whirlpool models.

The Freezer Tray is an OEM part for LG refrigerators. It provides an open, flexible surface area within the freezer compartment for storing and organizing frozen foods. The freezer tray's material and rail design also efficiently facilitate airflow to maintain sub-freezing temperatures throughout. 

Symptoms of a faulty freezer tray include:

• Cracks or breaks that compromise structural integrity
• warping or pitting which prevents proper sealing 
• uneven temperatures due to airflow disruption

Causes of a bad freezer tray can include impact damage over time, continuous door openings and closings leading to fatigue, and temperature fluctuations compromising the material.

This OEM LG part is also compatible with Sears/Kenmore refrigerator models.

A small retaining pin used to secure moving parts and keep components aligned for smooth operation. Replacing a worn or broken common pin can stop rattling and restore proper fit between linked parts. What it does:

• Holds or aligns two parts together so they move correctly and stay in position
• Helps prevent rattling, looseness, or parts slipping out of place
• Works as a simple mechanical fastener—no electronics involved

• One common pin

• Disconnect power to the appliance before beginning any service
• Keep track of small parts; lay out components in order to aid reassembly
• May require removal of trim or a hinge/retainer to access the pin—use basic hand tools
• If the pin is difficult to seat, do not force; inspect mating parts for damage

This upper hinge assembly secures and guides the refrigerator door so it opens and closes smoothly and stays properly aligned. Replaces a worn or damaged upper hinge to reduce door sag and improve sealing performance. What it does

• Supports the top of the refrigerator door and provides a pivot point for opening and closing.
• Restores proper door alignment to help the gasket seal evenly and maintain cooling efficiency.
• Reduces rubbing, grinding, or noisy operation caused by a worn hinge.
• Helps prevent uneven wear that can lead to door sag or difficulty closing.

• Unplug the appliance and empty or support the door before removing the hinge to prevent injury or damage.
• Use proper hand tools; keep track of fasteners and any spacers or bushings that come off with the hinge.
• Check gasket condition and door alignment during reassembly; adjust per the service manual if needed.

This center hinge assembly secures and guides the refrigerator doors, restoring correct door alignment and smooth opening. Replaces worn or damaged center hinge hardware to help stop sagging and improve door sealing. What it does:

• Provides the central pivot point between the refrigerator doors for proper alignment and operation
• Restores smooth, even door movement when original hinge is worn or bent
• Helps the doors close fully to maintain the appliance seal and consistent internal temperature
• Fits the factory mounting points and matches OEM form for direct replacement

• Basic removal of trim and temporary support of the doors is required; have a helper to steady doors during replacement
• Use appropriate hand tools; avoid overtightening fasteners to prevent damage
• Disconnect power only if removing electrical components nearby; this part replacement is typically mechanical
• Inspect surrounding hinge screws and door hardware and replace if worn for best results