Lfxs269596d Parts

This Hinge Cover Assembly protects and conceals the door hinge area, restoring a clean appearance and preventing dirt or loose clothing from catching in the hinge. Fits where a cosmetic or protective hinge cover is needed. What it does:

• Covers the door hinge to shield moving hardware from debris and reduce pinching hazards
• Restores a finished look to a damaged or missing hinge area
• Helps keep lint, dust and small objects away from the hinge mechanism
• Can reduce noise caused by exposed hinge components when intact

• One Hinge Cover Assembly as shown

• Intended for drop-in replacement; follow your appliance's service manual for disassembly steps
• Disconnect power and water before starting any repair
• Handle plastic parts carefully to avoid cracking; use appropriate fasteners and torque per OEM guidance
• If hinge or mounting hardware is damaged, replace those components before installing the cover

This lamp cover assembly protects and diffuses the interior light so the appliance illuminates evenly while shielding the bulb from spills and impact. It restores a finished look and helps keep the light working safely. What it does:

• Shields the interior light bulb from food, moisture, and accidental contact
• Diffuses light for more even illumination inside the compartment
• Prevents direct bulb exposure that can cause glare or damage
• Replaces cracked, yellowed, or missing lens that reduces light output

• Disconnect power to the appliance before servicing to avoid shock
• Handle the lens carefully to avoid scratches or cracking during install
• Typically secures with simple clips or screws; have a screwdriver handy
• Avoid touching the bulb with bare hands

This complete freezer door assembly replaces a damaged or worn freezer door to restore proper closure and cold retention. It fits the freezer compartment and includes the door shell and attached inner components for a like-for-like replacement. What it does:

• Replaces a cracked, dented, or warped freezer door to help prevent cold air loss
• Restores proper door alignment and sealing to reduce frost buildup and temperature issues
• Provides the original mounting points and inner components for easy fitment
• Helps the freezer maintain consistent performance when the old door can't close or seal properly

• Disconnect power to the appliance before starting any repair
• Remove food and shelves from the freezer area for access and safe handling
• Installation typically requires basic hand tools; support the door during removal/installation to avoid injury or damage
• If the door contains glass or trim, handle carefully.

This freezer door foam assembly replaces the insulating foam inside the freezer door to restore proper thermal barrier and reduce cold-air leaks. It helps the door maintain temperature and prevents excess frost or compressor overwork. What it does:

• Replaces the polyurethane foam layer that insulates the freezer door
• Helps reduce cold-air leakage that can cause frost build-up or uneven temperatures
• Supports more efficient cooling by improving the door's thermal seal
• Can reduce excessive run time caused by lost insulation

• Disconnect power to the appliance before starting any repair.
• Removing the inner door liner/panel is usually required; follow the refrigerator's service manual for panel removal and reassembly.
• Handle the foam carefully to avoid tears or punctures; foam may be bonded with adhesive or held by clips depending on model.

This duct assembly routes airflow inside the appliance to maintain proper venting between components. Replacing a damaged or clogged duct restores correct airflow for efficient operation and reduces noise. What it does:

• Channels air between internal components to support heating, cooling, or drying cycles
• Helps prevent backflow and misdirected airflow that can reduce performance
• Commonly replaced when airflow is restricted, the appliance runs louder than normal, or moisture/ice buildup occurs
• Fits where a single adjustable/multi-connection duct is required for OEM-style airflow routing

• One duct assembly

• Power off and unplug the appliance before servicing to avoid shock or injury
• Remove panels as needed to access the duct; follow OEM disassembly order to prevent damage
• Inspect adjacent seals and mounting clips; replace any damaged fasteners for a proper fit

This harness assembly is a factory-style wiring harness that routes power and control signals between the dispenser, ice maker and main control—restoring electrical connections for reliable dispenser and ice-maker operation. What it does

• Carries power and signal lines between the refrigerator control board, dispenser and ice maker
• Restores lost or intermittent dispenser power and control communication
• Helps stop intermittent ice-maker cycling or dispenser failures caused by damaged wiring
• Eliminates loose, corroded or broken connector problems on the original harness

• One harness assembly as shown

• Disconnect power to the appliance before starting any repair
• Handle connectors gently and match keyed plugs to their mating sockets
• Inspect connector pins and wiring routing; replace any damaged clips or grommets

This DC drive motor powers the appliance's main mechanical functions, restoring normal rotation and performance when the original motor fails. Replacing a worn motor can stop erratic operation and restore proper cycling. What it does

• Provides rotational drive for the appliance's motor assembly to enable normal operation
• Stops or reduces symptoms such as no spin/drive, intermittent operation, or loud unusual noises from the motor area
• Re-establishes reliable motor torque and speed control used by the appliance's control board
• Can resolve motor-related error codes or fault conditions tied to drive failure

• Disconnect power before starting and follow all safety instructions
• Handle connectors and wiring harnesses carefully; transfer any brackets or mounts from the old motor as required
• Verify connector orientation and secure fasteners per OEM torque guidance; test operation before reassembling panels

This PTC thermistor assembly senses temperature changes and sends that signal to the appliance control so the system can regulate heating or cooling. It's a direct-replacement part that restores accurate temperature feedback for proper cycle control. What it does:

• Measures temperature and provides a resistance/voltage signal to the control board
• Helps the appliance maintain correct operating temperature and cycle timing
• Can cause long run times, poor temperature control or error codes when failing
• Works as a monitored safety/feedback device in the appliance's thermal system

• One thermistor assembly (PTC) as shown

• Disconnect power before servicing to avoid shock or damage
• Handle the sensor and wiring carefully; avoid bending or stressing the probe or connector
• Reconnect wiring securely and route harnesses away from moving parts and heat sources