Lfxs269596d Parts

This refrigerator ice maker assembly automatically fills, freezes, and harvests ice cubes into the bin. Replacing a failed ice maker restores steady ice production and proper shutoff when the bin is full.

• Automates the ice-making cycle: fills the mold, freezes water, and ejects cubes into the bin
• Monitors bin level and stops production when full
• Helps address symptoms such as no ice production, not cycling/harvesting, or cubes not ejecting
• Can also help with intermittent or inconsistent ice output

• Unplug the refrigerator and shut off the water supply before servicing
• Remove the ice bin, unfasten mounting screws, and disconnect the wire harness
• Transfer existing brackets or covers if required; reconnect harness and secure the assembly
• Align the fill tube with the icemaker inlet; restore power/water and allow up to 24 hours for normal ice production

Restore a tight seal on your freezer by replacing a worn gasket. A fresh, pliable gasket keeps cold air in, limits frost and moisture around the door, and helps your freezer maintain stable, food-safe temperatures.

• Creates the air-tight seal between the freezer door and cabinet frame
• Helps maintain correct freezer temperature and energy efficiency
• Reduces frost/ice buildup and condensation near the door opening
• Symptoms include tears, warping, gaps, excessive frost, or the door not closing flush

• Disconnect power before servicing
• Warm the gasket in hot tap water or with low heat to improve flexibility
• Clean and dry the door channel; press the gasket fully into the retainer, starting at the corners
• Close the door and check the seal all around; adjust as needed and allow time for the gasket to conform

This plastic lever button transmits your press to an internal switch or latch. Replacing a worn or broken actuator restores crisp, reliable button action so the feature it controls responds as expected.

• Transfers motion from the external button or paddle to an internal microswitch or latch
• Restores positive, consistent actuation and return
• Helps with symptoms like a button that sticks, feels loose, needs extra force, or fails to engage
• Replaces a cracked, worn, or missing lever button

• Disconnect power before servicing; turn off the circuit breaker or unplug the appliance
• Remove trim or the control/escutcheon to access the button mechanism; support tabs and clips to avoid damage
• Note orientation and transfer any springs, pins, or clips from the old part to the new one
• If servicing a microwave, be aware of high voltage stored in the capacitor.

Located in the left refrigerator door on french door models.

The Dispenser Cover is an OEM part for LG refrigerators. This cover protects the dispenser unit, shielding the internal components from spills and debris.

Causes for a bad cover can include cracks or breaks from regular opening and closing of the dispenser over time, damage due to accidental impacts, or staining/warping from repeated exposure to liquid spills.

Symptoms of a bad dispenser cover include:

• Presence of moisture, dirt or food particles within the dispenser assembly
• Interior dispenser components becoming corroded or malfunctioning prematurely
• Difficulty opening and closing the cover smoothly
• External cosmetic defects such as cracks, scratches, stains or discoloration

This OEM LG part is also compatible with some Kenmore models.

This motor support damper sits between the refrigerator's compressor and base to absorb vibration and movement. Replacing a worn damper helps quiet rattles and humming from the back of the cabinet and keeps the compressor properly supported.

• Cushions the compressor to reduce transmitted vibration and noise
• Helps quiet humming, buzzing, or rattling from the lower rear of the refrigerator
• Maintains proper compressor alignment and support on the base pan
• Common signs of wear: increased vibration/noise, a cracked or flattened damper, or noticeable compressor movement when running

• Unplug the refrigerator and pull it forward to access the rear; allow the compressor to cool before working
• Support the compressor to remove load from the mount before loosening hardware
• Replace the damper and tighten mounting hardware evenly without over-compressing the rubber
• Avoid bending or stressing refrigerant tubing; wear gloves and eye protection

This sensor PCB assembly detects and relays sensor signals to the appliance control system, restoring accurate sensor feedback and communication when the original sensor board fails or malfunctions. Designed as a direct replacement board. What it does:

• Reads sensor inputs and converts them to signals the main control board can interpret.
• Replaces a failed or intermittent sensor board that causes incorrect readings or sensor-related error codes.
• Can resolve symptoms such as unexpected sensor faults, control errors, or appliances not responding to sensor changes.
• Matches the OEM board function; verify model compatibility before ordering.

• Always disconnect power before servicing to avoid shock or shorting the board.
• Use ESD precautions and handle the PCB by its edges to prevent static damage.
• Ensure all connectors are fully seated and the board is mounted in the original orientation.

Display Cover Assembly with controls.

This guide assembly is a chassis alignment and support piece that helps hold and position internal TV components for proper fit and operation. Replacing a damaged guide restores secure mounting and reduces panel or board movement. What it does:

• Secures and aligns internal TV modules or boards to the cabinet
• Prevents rubbing, vibration noise, and intermittent contact from loose parts
• Helps keep the display and internal assemblies correctly spaced for reliable operation
• Useful when cracked, warped, or broken guides cause misalignment or rattling

• One guide assembly as shown

• Unplug the TV and remove power/antenna cables before starting
• Ground yourself to protect against static-sensitive components
• Use original screws and fasteners; inspect adjacent tabs and mounts for damage during installation

This rail guide assembly restores smooth, stable sliding for a refrigerator/freezer drawer or shelf drawer, helping the drawer track properly and reducing rubbing or sticking during use. What it does:

• Replaces a worn or damaged drawer slide rail to restore proper alignment and smooth movement
• Helps stop drawers from sticking, binding, scraping, or falling out of track
• Supports the drawer weight and guides it in and out evenly
• Reduces noise caused by misaligned or worn rails

• Disconnect power (and water, if applicable) before servicing the appliance
• Remove the drawer or shelving to access the rail; retain fasteners for reuse unless new ones are provided
• Inspect matching rail on the opposite side; replace both sides if both show wear for best performance

This is a door assembly that has been manufactured by LG for use with refrigerators. The door assembly includes multiple parts required for replacing the entire door, such as the inner liner and the outer panel. A working door is necessary for the refrigerator to maintain cold enough temperatures inside. If the current door is dented, bent, detached, or otherwise broken, it should be immediately replaced. This replacement might require two people, as the door is heavy. Take proper safety precautions, such as wearing work gloves and disconnecting the appliance from the power source.As a genuine OEM part, this door assembly has been sourced directly from the manufacturer and is only sold individually. This door assembly is manufactured from high-quality and durable materials to ensure durability. It is intended for use with refrigerators manufactured by LG.

This ice bucket assembly is the removable storage bin that collects and holds cubed ice from the refrigerator ice maker, restoring clean, contained ice storage and proper pickup by the dispenser or scoop. What it does:

• Collects and stores cubed ice produced by the ice maker so ice is contained and ready for use
• Guides ice toward the dispenser/auger area for consistent pickup
• Common symptoms it addresses: cracked or warped bin, ice spilling or falling out, ice not accumulating in the bin
• Fits into the freezer ice maker area and works with the factory guides and ejector mechanism

• Disconnect power to the refrigerator before servicing to avoid injury or damage
• Remove existing bucket by sliding it out of the guides; handle plastic parts gently to avoid cracking
• Reinstall by seating the bucket into the guides until it clicks or seats securely; ice maker components align before restoring power
• After installation, cycle power or run a test ice-making cycle to ensure proper operation