Lfxs269596d Parts

This factory rail guide assembly supports and aligns a sliding refrigerator drawer. Replacing a worn or damaged guide restores smooth, level drawer travel and helps prevent binding, scraping, or the drawer dropping on one side.

• Supports and guides the drawer as it opens and closes
• Helps keep the drawer level and properly aligned
• Restores smooth operation when the original rail is bent, cracked, or worn
• Typical symptoms include hard-to-open drawer, uneven movement, grinding/scraping, or visible rail damage

• Disconnect power and remove food from the affected drawer before starting
• Remove the drawer/basket from the slides; note hardware orientation and position
• Swap in the new rail guide assembly, transferring reusable hardware from the original as needed
• Reinstall the drawer and verify smooth, level travel; match left/right orientation to the original part

This tray cover protects the appliance tray from spills, debris and everyday wear while restoring a finished appearance. Replacing a damaged or missing cover helps contain messes and keeps internal tray areas accessible for service. What it does:

• Covers and protects the tray area from food, water and debris
• Restores a clean appearance and helps prevent buildup on underlying components
• Stops small spills from spreading into the tray cavity
• Commonly replaced when cracked, warped, broken or missing

• Disconnect power to the appliance before beginning any service
• Remove nearby parts or trays as needed to access the cover
• Do not force the cover; align tabs and fasteners to avoid damage

This ice bank door gasket is the flexible door seal that keeps the ice bin compartment closed to limit warm air and moisture intrusion. Replacing a worn or torn gasket restores a tighter seal and helps reduce frost buildup and ice clumping. What it does:

• Forms an airtight seal around the ice bank/ice bin door to help prevent warm air and moisture from entering the compartment
• Reduces frost buildup, ice clumping, and excessive condensation inside the ice bin area
• Helps stop water or drips that can occur when the door seal is cracked or deformed
• Restores even door contact for proper closing and retention of ice quality

• Disconnect power to the refrigerator and remove the ice bin and any loose items before beginning.
• Inspect the door mounting channel; clean residue and old adhesive so the new gasket seats fully.
• Press the gasket evenly into the door channel, aligning any tabs or locator features; avoid stretching the gasket excessively.
• Use only non-sharp tools to ease the gasket into place; if the model uses clips or adhesive, replace or reapply per the manufacturer's instructions.

This replacement door basket restores usable storage space on the refrigerator door, holding bottles, jars and small containers so food stays organized and easy to reach. Made to match the original fit and mounting points. What it does:

• Replaces a cracked, broken or chipped door basket that can no longer hold items securely
• Restores proper storage and keeps bottles and containers from shifting or falling
• Replaces missing or warped bins that prevent the door from sealing or organizing contents
• Compatible with factory mounting clips and shelf support locations

• Remove all food and loose items from the door before installing the new basket
• Most door baskets snap into place on molded supports; align tabs and press until secured
• Inspect mounting clips or supports for damage; replace clips if they are broken

This magnet-activated switch is a small sensor that tells the appliance when a door or lid is open or closed. Replacing a faulty switch restores proper lighting, door-ajar alerts, and safety interlocks for normal operation.

• Senses a nearby magnet to report door/lid open/closed status to the control
• Helps control interior lights, alarms, fans, and dispenser/ice interlocks on applicable units
• Failure symptoms can include lights staying on or off, false door-ajar beeps, or dispenser/ice disabled
• Common causes: moisture intrusion, damaged leads, or stuck internal contacts

• Disconnect power before servicing
• Access the switch at the door opening (behind trim/control housing or liner, location varies by model)
• Release locking tabs/fasteners, move wiring carefully, and install the new switch in the same orientation
• Restore power and verify operation by bringing a magnet near the switch to toggle

This vegetable tray assembly replaces a cracked or worn crisper drawer shelf to keep fruits and vegetables organized and supported in the refrigerator. Restores stable storage and proper airflow across stored produce. What it does:

• Provides a stable shelf surface for fruits and vegetables to sit on inside the crisper compartment
• Replaces cracked, warped, or otherwise damaged trays that can let produce fall through or sit unevenly
• Helps maintain normal airflow and organization within the crisper area
• Reduces risk of spills and makes cleaning easier compared with a damaged tray

• Remove all food and unsecured items from the crisper area before replacing the tray
• Slide out or lift the old tray per the refrigerator's service instructions; handle edges carefully to avoid cuts
• Align the replacement tray with the drawer rails or supports and slide into place without forcing
• If any clips, rails, or supports are broken or missing, replace them before use.

This spanner is the specialized hand tool used to turn and hold slotted nuts, collars, or fittings on compatible appliances, making service and adjustments easier and safer. It gives a secure grip for loosening or tightening components without damaging surrounding parts. What it does:

• Fits and turns slotted or notched appliance fasteners and collars commonly used in assemblies
• Helps hold a component steady while you loosen or tighten the mating fastener
• Reduces slippage and tool marks compared with pliers or improvised tools
• Useful during maintenance tasks such as removing retaining rings, collars, or adjustable fittings

• One spanner tool

• Disconnect power and/or gas and follow all safety precautions before servicing appliances
• Use the correct size spanner engagement to avoid slipping or rounding the fastener
• Apply steady force; do not use cheater bars or excessive torque unless specified by the manufacturer

This replacement tray/drawer is the removable crisper-style bin that holds fruits and vegetables in the refrigerator compartment, keeping produce organized and contained. It restores a stable storage surface and makes everyday access and cleaning easier. What it does:

• Replaces a cracked, warped or missing crisper/vegetable bin
• Supports and contains produce to prevent spills and keep shelves tidy
• Helps maintain proper airflow around stored items when used with existing rails
• Visible, easy-to-clean plastic surface for simple maintenance

• One replacement tray/drawer

• Slide into existing drawer tracks or rails; no tools typically required
• Handle with care to avoid scratching or dropping during installation
• Keep away from open flames and high-heat sources; dishwasher-safe only if OEM documentation confirms

This rail guide assembly replaces a worn or broken slide rail that supports smooth movement of a drawer or component. Restores proper alignment and helps the drawer glide quietly and evenly. What it does:

• Guides and supports the drawer or sliding component along its track.
• Replaces damaged or bent rail sections that cause sticking or uneven movement.
• Reduces scraping, grinding, or noisy operation from a faulty guide.
• Helps restore proper alignment to prevent binding or partial closure.

• One rail guide assembly.

• Disconnect power (and water if applicable) and follow appliance-specific disassembly steps before replacing the rail.
• Basic hand tools are typically required; avoid forcing components to prevent breakage.
• Keep fasteners and any removed parts organized for reassembly.

The Basket Assembly is an OEM component specifically designed for LG Door-in-Door refrigerators containing bottom-mounted crisper drawers. This integral assembly organizes stored items within the refrigerator doorway.

Symptoms of a bad basket assembly include:

• Cracked or broken perforated shelves  
• Detached mounting brackets failing to secure basket
• Warped contours no longer fitting base compartment
• Missing attachments inhibiting proper installation

Causes of failure involve stresses from repeated loading/unloading cycles, mineral buildup weakening plastic brackets over time, or impact damage compromising structural integrity.

Replace yours today with this genuine OEM LG assembly to maintain tidy organizational capacity. Precision slots provide adjustable shelf positioning optimized for produce, snacks, and beverages. Compatible across Samsung, Frigidaire, and GE models featuring removable door crisper baskets.

This TV cover assembly replaces a damaged or missing rear cabinet panel to restore the set's enclosure and protect internal components. It helps maintain proper airflow and keeps circuitry and wiring shielded from dust and impact. What it does:

• Replaces a cracked, dented, or warped rear TV cabinet panel
• Protects internal electronics, boards, and wiring from dust and accidental contact
• Helps maintain proper ventilation pathways and chassis alignment
• Restores cosmetic appearance of the TV's rear housing

• One TV cover assembly

• Refer to the TV's service manual for disassembly/reassembly instructions and correct screw locations
• Power off and unplug the TV before beginning any repair; allow components to discharge
• Handle internal components and the cover carefully to avoid damage to boards, cables, and connectors

This hinge cover assembly replaces a worn or damaged lid hinge cover to restore a smooth, finished look and protect the hinge area from debris and pinching. It helps keep the hinge area sealed and reduces snagging on the lid edge. What it does:

• Covers and protects the lid hinge and pivot area from dirt and moisture
• Restores a clean appearance where a cracked or missing hinge cover was visible
• Helps prevent clothing or hands from catching on the exposed hinge
• Can reduce rubbing noise caused by contact with a damaged cover

• Basic removal of the lid or access panel may be required; follow for proper disassembly
• Use appropriate hand tools and keep small fasteners secure during reassembly
• Disconnect power (and water for washers) before starting work to avoid injury

This Door Basket is a replacement door-mounted storage basket that restores inside-door storage and helps keep items organized and accessible. It fits the original door mounting points to return usable shelf space. What it does:

• Provides a rigid storage shelf mounted to the appliance door for bottles, jars, and small containers
• Restores lost or damaged door storage to improve organization and access
• Replaces cracked, broken, or missing door basket that causes items to fall or shift
• Matches original mounting locations for a secure fit when installed correctly

• 1 door basket

• Remove power to the appliance and empty the door before starting work
• Align with existing door mounting clips or screws and secure using the original hardware
• Inspect surrounding door trim and seals for damage during installation

This overload protector is a compressor safety device that helps stop compressor damage by interrupting power during electrical overload or overheating. It restores normal operation once conditions return to safe levels. What it does:

• Detects electrical overloads or excess heat at the compressor and temporarily cuts power to prevent motor damage
• Common symptom: compressor runs briefly then stops, or refrigerator cools intermittently
• Works with the compressor start system to protect against burnout and electrical faults
• Passive mechanical/electrical device—no user controls

• Disconnect power to the appliance before accessing the compressor or electrical components
• Handle terminals and mounting carefully to avoid bending or damaging connections

This Tray Cover Assembly replaces a damaged or missing cover on the appliance tray to help contain contents and keep the tray functioning correctly. It restores the tray's protective surface and helps prevent spills or contamination. What it does:

• Covers and protects the tray surface to keep contents contained
• Helps direct contents into the tray area to reduce spills
• Replaces cracked, warped or broken covers that no longer seat properly
• Restores a flush fit and appearance for the tray area

• One tray cover assembly

• Disconnect power to the appliance before beginning any service
• Remove the tray or access panel per your model's service instructions to access mounting points
• This part typically snaps or slides into place; light tools (screwdriver) may be needed to remove retaining clips

This door foam assembly replaces the insulation inside a refrigerator door to help restore proper temperature retention and reduce condensation. It fits into the door liner to replace damaged or missing foam for improved cooling performance. What it does:

• Replaces deteriorated or compressed door insulation to help maintain consistent cabinet temperature
• Reduces interior condensation and frost buildup caused by broken or missing door foam
• Improves energy efficiency by restoring the door's thermal barrier
• Helps eliminate cold spots on the door that can affect stored items

• One door foam assembly

• Unplug the appliance before beginning any repairs.
• Installation typically requires removing the door liner or inner panel; keep track of fasteners and clips.
• Handle edges and clips carefully to avoid damage to the liner or gasket; use appropriate trim tools.
• If adhesive or sealant is present, carefully remove old material and clean surfaces before installing the new foam.