Lfxs269596d Parts

This refrigerator door foam assembly replaces the door's internal insulation to help restore proper temperature retention and reduce condensation. It fits behind the door liner to improve cooling efficiency and maintain food freshness. What it does:

• Replaces the insulating foam inside the refrigerator door to reduce cold-air loss
• Helps minimize condensation and frost buildup on the door interior
• Supports consistent cabinet temperature for better food preservation
• Restores proper door thickness and helps the door close and seal correctly

• Disconnect power and empty the door before starting; follow safety precautions
• Access requires removing the door liner/panel and possibly door shelves and gasket
• Handle foam gently to avoid tearing; seat the foam evenly before reassembling the liner

This guide assembly supports and guides a sliding drawer or rail-driven component so it moves smoothly and stays aligned. It restores proper tracking and reduces binding, sticking, or noisy operation from worn guides. What it does:

• Guides and supports the drawer/rail so it opens and closes evenly
• Keeps the drawer aligned to prevent scraping, sticking, or jamming
• Dampens noise and reduces vibration from loose or worn guides
• Replaces a damaged or worn rail guide that causes uneven movement

• Disconnect power and remove the drawer or panel before replacing
• Inspect mounting clips, screws, and adjacent parts; replace any damaged fasteners
• Install the new guide in the same orientation as the original; do not force parts into place

This stopper assembly cushions and limits the door travel to prevent slamming and ensure correct door alignment. It restores smooth, controlled closing and helps reduce noise and wear on the door hinge area. What it does:

• Absorbs door impact to prevent hard slams and reduce noise
• Keeps the door from overtravel for consistent alignment
• Helps protect hinge and cabinet edges from damage
• Restores proper door closing feel when worn or broken

• One stopper assembly as shown

• Disconnect power and empty door area before starting repairs
• Access may require removing door trim or inner panel
• Use basic hand tools; avoid forcing the part into place to prevent damage

This drawer tray assembly replaces a damaged or worn storage drawer, restoring a secure shelf and smooth operation. It provides a direct-fit replacement that holds food and items safely in the appliance. What it does:

• Replaces a cracked, warped, or broken drawer tray so items sit level and secure
• Restores proper sliding and support when the drawer sticks, jams, or falls out
• Replaces trays with broken mounting tabs or rails that prevent correct seating
• Helps prevent spills and keeps contents contained when the drawer is opened

• One drawer tray assembly

• Remove contents and existing drawer before installing; align mounting tabs and slide into place
• Inspect rear and side guides for damage and clean tracks before installing the new tray
• Use care not to overtighten any fasteners; replace any broken clips or supports as needed
• If the appliance has electrical components nearby, unplug the appliance or disconnect power before working

This drawer tray assembly replaces a broken or worn refrigerator drawer surface so stored food stays supported and organized. It fits into the freezer/refrigerator drawer area and restores smooth sliding and storage capacity. What it does:

• Provides a sturdy surface for holding food items inside the drawer
• Replaces cracked, warped or otherwise damaged drawer tray surfaces
• Helps the drawer open and close smoothly when properly seated
• Restores proper alignment and prevents items from shifting during use

• Installation requires removing the drawer; handle parts carefully to avoid damage
• Use basic hand tools; support the drawer while detaching and reattaching components
• If clips or rails are damaged, inspect and replace them separately
• Disconnect power only if required by your model's service instructions and follow all safety precautions

This tray assembly replaces the fresh room shelf/drawer support to restore a flat, stable surface for storing produce and deli items. It fits into the designated fresh room area to help keep items organized and contained. What it does:

• Provides a stable shelf surface in the refrigerator fresh room for fruits, vegetables, and deli items
• Replaces cracked, warped, or missing trays that no longer support stored food
• Helps prevent items from shifting or falling when the drawer or shelf is opened or closed
• Matches OEM fit and form for correct placement in the fresh room compartment

• Unplug the refrigerator or disconnect power before beginning any service
• Empty the fresh room area and remove existing tray before installing the new assembly
• Slide the tray into the compartment until it seats; it rests securely on support rails or ledges
• If any clips or rails are damaged, inspect and replace them for a proper fit

This DC motor assembly powers the appliance's indoor fan to move air where needed. Replacing a worn motor restores proper airflow and reduces noise, helping the appliance maintain performance and temperature control. What it does:

• Spins the indoor fan/blower to circulate air through the appliance
• Restores airflow when a motor has failed or stopped running
• Reduces whining, grinding, or irregular fan noise caused by a faulty motor
• Helps resolve uneven temperatures or poor circulation tied to a bad motor

• Disconnect power to the appliance before starting any repair
• Handle wiring connectors and mounting tabs carefully; match harness connections exactly
• Inspect and secure mounting screws and blower/fan alignment during reassembly
• Test operation after installation to ensure proper airflow and sound

This replacement lever button is the user-operated push control that lets you engage the appliance's latch or control function. It restores a worn, cracked, or non-springing button so controls respond reliably. What it does

• Acts as the external push/lever used to latch, unlatch, or activate a control mechanism
• Replaces cracked, loose, or unresponsive buttons that no longer engage properly
• Helps restore normal tactile response and alignment of the control assembly
• Works with the existing actuator and mounting points — no modification required

• One replacement lever button

• High-level replacement only; remove power source before starting repair
• Handle panels and clips gently to avoid damage to trim or surrounding controls
• Verify correct button orientation before final reassembly

A small protective cap that covers and protects a component connection or opening from dirt and moisture, helping maintain proper function and prolong component life. Simple replacement when the original cap is cracked, missing, or worn. What it does:

• Covers exposed fittings, terminals, or openings to keep out debris and moisture
• Helps prevent leaks or contamination at the sealed connection
• Restores a secure fit when the original cap is cracked, split, or degraded
• Commonly used where a small, removable protective seal is required

• Inspect mating surface and surrounding gasket/seal before installing; replace other damaged parts as needed
• Press the cap firmly into place until fully seated; no special tools usually required
• Wear gloves and disconnect power or water supply if working near energized or pressurized components

This dispenser lever replaces a cracked, loose, or non-returning dispenser paddle so you can reliably activate the fridge dispenser again. Durable replacement that restores normal button/paddle operation and user control. What it does:

• Acts as the user-operated paddle that presses the dispenser switch to release water or ice
• Restores proper lever return and consistent contact with the dispenser switch
• Stops leaks, wobble, or snagging caused by a broken or worn paddle
• Helps eliminate intermittent or failed dispenser activation related to a damaged lever

• One dispenser lever

• Disconnect power to the appliance before starting; shut off the water supply if working near the dispenser
• Remove dispenser bezel/trim and any inner cover per manufacturer instructions to access the lever
• Replace the lever and confirm it moves freely and properly contacts the dispenser switch before reassembling

A replacement cover motor that powers the refrigerator's dispenser cover, allowing the door to open and close so you can access ice and water. Replaces a worn or failed motor to restore normal dispenser cover operation. What it does:

• Drives the dispenser cover mechanism so the cover opens when dispensing and closes when idle
• Helps keep the dispenser sealed to reduce drafts and prevent pests or debris from entering
• Stops or fails to move when worn, causing a stuck, slow, or noisy dispenser cover
• Works with the dispenser linkage and gears to coordinate cover motion with user controls

• One cover motor

• Disconnect power to the appliance before beginning any repair
• Remove dispenser trim and access panel per your model's service instructions to reach the motor
• Handle gears and linkage carefully; ensure proper alignment during reassembly and test cover operation before finishing

This cover assembly protects a control board's printed circuit board (PCB) by shielding it from dust, moisture, and accidental contact. It helps keep the PCB secured and reduces the chance of shorting or damage during normal use. What it does:

• Shields the PCB from dirt, splashes, and foreign objects that can cause shorts or corrosion
• Secures the board in place to prevent movement and stress on connectors
• Helps maintain safe separation between live circuitry and user-accessible areas
• Reduces intermittent electrical issues caused by debris or loose components

• Always disconnect power to the appliance before starting any repair
• Handle the PCB and cover with care to avoid static discharge; use proper ESD precautions if available
• Align the cover to the board and fasten using the existing mounting points; do not overtighten screws
• After installation, restore power and verify normal operation