Lfxs26973d Parts

The Ice Maker Assembly is an OEM replacement part for LG refrigerators. It contains the complete ice-maker.

Causes of a bad Ice Maker Assembly can include issues with proper ice ejection, ice cube size or shape inconsistencies, decreased ice production over time, mineral or sediment buildup affecting performance, or wear and tear from extended use.  

Symptoms include:

• Incomplete or inconsistent ice filling of the ice tray 
• Cracked, pitted, or misshapen ice cubes
• Ice cubes not ejecting from the tray properly
• Slowed or ceased ice production

This OEM LG ice maker assembly is also compatible with some Kenmore refrigerator models. 

This refrigerator water inlet valve assembly regulates water flow from your home supply into the appliance. It restores proper filling for the ice maker and/or water dispenser and helps address leaks or no-water conditions. What it does

• Opens and closes to control water entering the refrigerator when energized
• Routes water to the ice maker and/or dispenser, depending on model design
• Common failure symptoms: no water from dispenser, ice maker not filling or making ice, slow/weak dispensing, or leaking from the rear of the unit
• Electrical/valve faults can also cause continuous dripping or overfilling

• One water inlet valve assembly

• Unplug the refrigerator and shut off the water supply before servicing
• Place a towel or pan to catch residual water when disconnecting lines
• Move tubing and wire connectors over one at a time to the new valve to maintain correct orientation
• After installation, restore water and power, then check all connections for leaks and verify proper operation

The Evaporator Fan Blade is an OEM replacement part for LG refrigerators. It is a key component located inside the refrigerator that works to circulate cold air evenly throughout. The fan blade spins rapidly to distribute chilled air from the evaporator coil and refrigeration system, ensuring proper airflow and consistent temperatures across all shelves and compartments.  

Symptoms of a bad evaporator fan blade include:

• Inconsistent or improper interior cooling temperatures 
• Hot or warm spots developing inside the refrigerator
• Strange noises such as clicking or grinding emanating from the rear wall

Causes of a bad evaporator fan blade can be wear and tear over time, an accumulation of dust or debris on the blades restricting airflow, or accidental damage like dents or cracks to the blades affecting their ability to spin smoothly.

This OEM LG part is also compatible with select Sears/Kenmore brand models.

This lever cover is a molded trim/protective piece that fits over a user-operated lever on the appliance. Replacing a damaged or missing cover helps protect the mechanism and restores a clean, finished appearance. What it does:

• Shields and guides the lever mechanism to help ensure smooth operation
• Helps keep internal components covered and aligned
• Restores the finished look when the original cover is cracked or missing
• Common symptoms: cracked or broken cover, loose/wobbly lever feel, sticking or misaligned lever action

• Includes 1 lever cover

• Disconnect power before servicing; if working near a dispenser, shut off water supply as applicable
• Remove any screws or clips and release locking tabs carefully to avoid breaking adjacent plastics
• Transfer any reusable hardware from the original part
• Check lever movement and engagement before final reassembly

The Door Gasket is an OEM part for LG refrigerators. This gasket creates an insulating barrier to keep cool air locked inside.

Causes of a bad door gasket can involve deterioration of rubber over many years of compression and expansion as doors open and close. Mineral deposits may lead to premature cracking as well.

Symptoms of a bad door gasket include:

• Cool air leaks raising energy costs noticeably
• Frost or condensation buildup along door edges
• Inability to maintain proper interior temperatures
• Premature wear of other components from compromised seal

This OEM LG part is also compatible with some Kenmore models.

The refrigerator door gasket seals the gap between the door and cabinet to keep cold air in and humid air out, helping maintain temperature, reduce frost and condensation, and restore a tight, reliable door close.

• Creates an airtight perimeter seal to prevent warm air leaks
• Helps stabilize interior temperature and humidity
• Minimizes frost buildup and condensation around the door
• Common symptoms: torn or deformed seal, door not sealing, moisture/frost near door, rising temps

What's included: 1 door gasket Installation notes:

• Disconnect power before servicing
• Allow the new gasket to warm to room temperature; soften in warm water or with gentle, low heat to relax folds
• Remove the old gasket and thoroughly clean the mounting channel/mating surfaces
• Seat the new gasket starting at the corners, then along the sides; ensure it's fully engaged and even all around, and check door alignment/seal

The Valve Assembly, Water is an OEM part for LG refrigerators. This assembly is a key component that controls the flow of water to the refrigerator's ice maker and water dispenser. It works behind the scenes to precisely regulate water pressure and ensure consistent filling and operation of these features. 

Symptoms of a faulty valve assembly can include:

• Slow or inconsistent ice or water dispensing  
• Water leaks inside or outside the refrigerator
• Inability to dispense ice or water at all
• Loud noises or vibrations from the water line or system

Causes of failure may involve mineral buildup or sediment clogging internal valves and filters over time. Damage from freezing could also disrupt the assembly.

This genuine LG replacement part helps restore reliable, leak-free water dispensing. It is also compatible with some Kenmore Elite refrigerator models that use LG components. Replace yours to fix common ice and water issues before they cause further damage.

Restore proper airflow with this replacement fan assembly. It circulates air across the coils and through the cabinet so your refrigerator can move heat effectively and maintain consistent temperatures throughout. What it does:

• Drives airflow to support heat exchange at the coils
• Helps maintain stable, even temperatures inside the compartments
• Supports proper cooling performance and system reliability
• Common symptoms: fan not running or intermittent, unusual rattling/scraping noise, reduced airflow, warmer-than-normal temps or extended run times

• 1 fan assembly

• Disconnect power before servicing; wear cut-resistant gloves
• Access the fan compartment; remove covers/panels as designed
• Note wire orientation and transfer any reusable hardware from the old unit
• Secure the assembly; ensure the blade spins freely before restoring power and testing

This TV cover assembly is the interior rear airflow cover in the refrigerator compartment. It encloses the ducting and helps distribute cold air evenly while protecting internal fan and components from damage.

• Directs chilled air from the evaporator throughout the fresh food compartment for consistent cooling
• Shields fan and duct components from impacts and debris
• Replace if cracked, warped, or missing tabs that cause rattling or airflow restriction
• Common symptoms include uneven temperatures, frost or ice on the back wall, and noise from fan contact

• Disconnect power and remove shelves/bins to access the rear interior panel
• Remove mounting screws and gently release locking tabs; watch for any attached harnesses or sensors
• Transfer any reusable components from the original cover as needed, then seat and secure the new cover evenly
• Restore power and confirm the fan spins freely with unobstructed airflow from vents

This refrigerator door handle restores a secure, comfortable grip and a clean, factory look. Replace a loose, cracked, or broken handle to improve daily usability and keep the door operating smoothly.

• Provides the handhold to open and close the refrigerator door
• Attaches to the door's factory mounting studs/brackets for a solid feel
• Helps maintain exterior appearance and ergonomics
• Common symptoms: handle feels loose or wobbly, cracks, breaks, or goes missing

• Unplug the refrigerator before servicing
• Protect the door finish with tape or a cloth around mounting points
• Align the handle on existing studs/brackets and tighten fasteners per your model's instructions; do not overtighten
• Confirm the handle is secure and the door closes and seals properly

This water filter assembly replaces the refrigerator's water filtration module to help restore clear-tasting water and steady flow. Fits models that use the AGF80300705 assembly and installs at the refrigerator water inlet. What it does:

• Filters sediment and common taste/odor contaminants to improve drinking water quality
• Restores reduced water flow caused by a clogged or failing filter module
• Helps reduce visible particulates and cloudiness in dispensed water
• Prevents unfiltered water from reaching the dispenser/ice maker when installed

• Turn off refrigerator water supply before replacing the assembly to avoid leaks
• Hand-tighten connections; avoid overtightening fittings to prevent damage
• Run and discard the manufacturer-recommended initial volume of water after install to flush the system

The Auger Motor is an OEM part for LG refrigerators. It is responsible for dispensing ice from the icemaker into the ice bucket. 

Symptoms of a bad auger motor include:

• Slow or incomplete ice filling of the ice bucket
• Ice clumping or jamming in the auger assembly 
• Grinding or rubbing noises coming from the icemaker region
• The icemaker not producing any ice at all

Causes of a bad auger motor can be wear and tear over time, freezing or ice buildup preventing proper operation, or failure of internal motor components. 

This OEM LG part is also compatible with select Sears/Kenmore models. 

This handle assembly replaces a damaged or worn freezer door handle to restore secure opening and a finished exterior look. It provides the grip and mounting points needed for normal freezer door operation. What it does:

• Replaces the freezer door handle, restoring a secure, ergonomic grip
• Re-establishes correct mounting and alignment for smooth opening and closing
• Helps prevent further cabinet or door edge wear from a broken handle
• Suitable when the existing handle is cracked, loose, or missing mounting hardware

• One freezer door handle assembly

• Basic tools typically required
• Follow manufacturer instructions and support materials for safe removal/installation
• Disconnect power and empty door storage as needed to avoid damage or injury
• Keep small fasteners and clips organized during replacement to ensure proper reassembly

This Rail Guide Assembly restores smooth opening and stable support for a refrigerator/freezer drawer or similar appliance drawer. It replaces a worn or damaged guide to reduce sticking, misalignment, or noisy operation. What it does:

• Guides and supports the drawer along its track so it opens and closes evenly
• Replaces cracked, bent, or worn guide components that cause sticking or derailment
• Reduces scraping or grinding noises from a misaligned drawer
• Helps maintain proper drawer alignment and weight distribution during use

• Rail Guide Assembly (single)

• Disconnect power and remove stored items before starting any repair
• Use basic hand tools; lift and align the drawer onto the new guide during reassembly
• Inspect mating tracks and rollers for damage; replace other worn components as needed

This rail guide assembly helps the appliance drawer or rack slide smoothly and stay aligned, restoring reliable movement and reducing scraping or sticking during use. What it does

• Guides the drawer/rack along its track for smooth in-and-out motion
• Keeps the drawer aligned to prevent binding or tipping
• Reduces noise from grinding or scraping when the drawer is moved
• Helps prevent uneven wear on the track and adjacent components

• One rail guide assembly

• Disconnect power and remove any contents from the drawer/rack before starting
• Installation typically requires removing the drawer and securing the guide with basic hand tools
• Inspect the mating track and fasteners; replace damaged hardware as needed