Lfxs26973s Parts

Note: Right Side Drawer

This ice dispenser assembly replaces the dispenser mechanism in compatible LG refrigerator doors, restoring smooth ice delivery and helping stop jams or broken chutes so your dispenser works reliably again. What it does:

• Channels ice from the freezer bin through the door to the dispenser chute.
• Activates the dispenser mechanism to release ice when the paddle/lever is pressed.
• Common symptom fixes: ice not dispensing, ice jams, cracked or damaged chute, or loose/disconnected dispenser components.
• Helps restore normal dispenser operation without replacing the entire door assembly.

• Disconnect power to the refrigerator before beginning any repair.
• Access typically requires removing the refrigerator door panel/liner and disconnecting the dispenser harness; follow the OEM service manual for procedure.
• Handle plastic chute components carefully to avoid cracking; check connector seating and alignment during reassembly.
• Test dispenser function after reinstalling the panel.

This refrigerator shelf assembly restores a sturdy, level storage surface in the refrigerator compartment. Replace a cracked, bowed, or missing shelf to keep food organized and safely supported.

• Provides a stable surface for containers and food in the refrigerator section
• Replaces a damaged, warped, or missing shelf assembly
• Helps prevent spills and tipping by restoring proper support
• Common symptoms: cracked/shattered shelf, broken frame tabs, shelf won't sit level or stay in place

• Disconnect power before servicing
• Remove items and lift out the old shelf carefully; retain any reusable parts specific to your model
• Wear cut-resistant gloves and handle the new shelf with care
• Ensure the shelf is fully seated in the side rails/tabs and level before loading

This TV cover assembly is the interior rear airflow cover in the refrigerator compartment. It encloses the ducting and helps distribute cold air evenly while protecting internal fan and components from damage.

• Directs chilled air from the evaporator throughout the fresh food compartment for consistent cooling
• Shields fan and duct components from impacts and debris
• Replace if cracked, warped, or missing tabs that cause rattling or airflow restriction
• Common symptoms include uneven temperatures, frost or ice on the back wall, and noise from fan contact

• Disconnect power and remove shelves/bins to access the rear interior panel
• Remove mounting screws and gently release locking tabs; watch for any attached harnesses or sensors
• Transfer any reusable components from the original cover as needed, then seat and secure the new cover evenly
• Restore power and confirm the fan spins freely with unobstructed airflow from vents

This water filter assembly replaces the refrigerator's water filtration module to help restore clear-tasting water and steady flow. Fits models that use the AGF80300705 assembly and installs at the refrigerator water inlet. What it does:

• Filters sediment and common taste/odor contaminants to improve drinking water quality
• Restores reduced water flow caused by a clogged or failing filter module
• Helps reduce visible particulates and cloudiness in dispensed water
• Prevents unfiltered water from reaching the dispenser/ice maker when installed

• Turn off refrigerator water supply before replacing the assembly to avoid leaks
• Hand-tighten connections; avoid overtightening fittings to prevent damage
• Run and discard the manufacturer-recommended initial volume of water after install to flush the system

The Water Valve is an OEM component specifically designed for LG refrigerators equipped with internal dispensers. Located inside the refrigerator wall, this valve regulates water flow to the dispenser spigot on demand. Through precise operation, it provides consistently refreshed chilled water.  

Causes of a bad water valve can include mineral buildup restricting flow passages over time, or physical damage disrupting seals.

Symptoms of a bad water valve include:

• No water was dispensed from the spout
• Leaks in the refrigerator compartment 
• Foreign odors emitted around the valve area

This authentic LG valve restores the dispenser function, delivering clean water efficiently. Its self-closing design helps prevent leaks when not in use. Replace to satisfy LG quality and support luxury features like internal filtration performing dependably for years.

This OEM LG part also fits select Kenmore refrigerator models using LG-developed components and controls for a premium user experience.
 

The Compressor is an OEM component specifically designed for LG refrigerators. Located inside the refrigerator compartment, the compressor pressurizes and circulates refrigerant through the cooling system. Through precisely timed operation, the compressor maintains optimal freshness.

Symptoms of a bad compressor include:  

• Elevated interior temperatures failing to efficiently chill
• Loud buzzing or vibrating noises coming from inside the walls  
• Frost buildup indicating ineffective cooling cycles
• Complete cooling system failure leaving foods unpreserved

Causes involve refrigerant leaks, blocked airflow to the compressor, or simply wear over tens of thousands of hours of use breaking down moving components.

This OEM LG part is also compatible with some refrigerator models from Kenmore and Sears. Replace to restore reliable, long-term temperature control keeping contents at peak freshness.

The Handle Assembly is an OEM part for LG refrigerator freezer compartments. It includes the handle and mechanical components that operate the freezer drawer.

Causes of a bad handle assembly can include fatigue from repeated opening and closing motions, damage sustained from heavy loads, or exposure to harsh chemicals over years of use.   

Symptoms of a bad handle assembly include:

• Handles detaching from the drawer front  
• Difficulty smoothly opening and closing the freezer drawer
• Inability to fully open or close the drawer
• Excessive play, wobble, or loose motion in the handle

Replace yours today with this genuine OEM LG assembly to restore effortless operation. This replacement handle is compatible with Frigidaire, Samsung, Whirlpool, and some Kenmore models.

The Auger Motor is an OEM part for LG refrigerators. It is responsible for dispensing ice from the icemaker into the ice bucket. 

Symptoms of a bad auger motor include:

• Slow or incomplete ice filling of the ice bucket
• Ice clumping or jamming in the auger assembly 
• Grinding or rubbing noises coming from the icemaker region
• The icemaker not producing any ice at all

Causes of a bad auger motor can be wear and tear over time, freezing or ice buildup preventing proper operation, or failure of internal motor components. 

This OEM LG part is also compatible with select Sears/Kenmore models. 

An in-line union for appliance tubing, this tube connector joins two sections of plastic line to create a secure, leak-resistant connection in the water circuit, ideal for restoring flow after a repair, trim, or reroute. What it does:

• Connects two lengths of compatible plastic tubing to form a continuous run
• Helps maintain proper water delivery through the appliance's water system
• Can address leaks, drips, or loose/failed connections at a splice point
• Useful when replacing, shortening, or rerouting tubing during service

• 1 tube connector

• Disconnect power and shut off the water supply before servicing
• Cut tubing square; ensure ends are clean, round, and free of gouges
• Insert tubing fully into the connector until seated, then perform a gentle pull test
• Restore water and inspect all joints for leaks; use the connector size that matches your tubing's outer diameter

This center hinge assembly supports the refrigerator door at the mid-hinge position and allows smooth, reliable pivoting. Replacing a worn hinge restores proper alignment so the door closes and seals as designed.

• Provides the pivot point at the center hinge location
• Supports door weight to maintain alignment and clearance
• Helps ensure even gasket contact for an effective seal
• Common symptoms: door sagging or rubbing, squeaking at the hinge, difficulty closing, visible play or damage at the hinge pin

• Unplug the appliance and remove items from the door to reduce weight
• Support the door while removing the center hinge fasteners
• Note and transfer any spacers/washers in the same order and orientation
• After installation, align the door and verify the gasket seals evenly

This is the refrigerator's vegetable tray assembly—the clear crisper drawer that holds produce in the fresh food compartment. Replace a cracked or missing bin to restore organized storage and smooth, reliable drawer operation. What it does

• Provides dedicated storage for fruits and vegetables in the refrigerator
• Slides on the existing drawer rails for easy access
• Helps contain spills and keep items organized
• Replace if the bin is cracked, warped, won't stay on its track, sticks, or is missing

• 1 vegetable tray assembly

• Empty the drawer and remove any shelf above if needed for clearance
• Pull the old drawer out to the stop, lift the front slightly, and remove
• Align the new tray on the rails and slide it fully into place
• Handle plastic carefully; edges can be sharp—use gloves and avoid forcing the drawer

This guide assembly is a factory-style mounting guide used in TV chassis to position and support internal components, helping maintain correct alignment and stable operation during use and service. What it does:

• Provides a mounting and alignment point for internal TV components to keep assemblies stable
• Helps maintain proper spacing between parts to prevent rubbing, misalignment, or rattling noises
• Can restore correct fit where a damaged or worn guide causes loose panels or shifting components
• Useful when repairing or replacing adjacent parts that rely on the guide for proper positioning

• Guide assembly

• Disconnect power and remove the TV from its wall mount or stand before servicing
• Handle the panel and internal boards carefully to avoid damage; use non-marring tools
• Keep track of all screws and grounding hardware removed during disassembly for reassembly

This lever button is the push-style control used to activate a specific function on the appliance's control panel. It restores tactile control and makes it easy to trigger the associated feature without replacing the whole panel. What it does:

• Acts as the user-facing push lever that completes the button action on the control assembly
• Replaces a cracked, worn or unresponsive lever that won't depress or return properly
• Helps resolve intermittent or failed button activation when the switch and contacts are otherwise good
• Matches the OEM shape so the button aligns and engages cleanly with the underlying switch

• High-level swap: remove the front/control bezel to access and replace the lever; keep screws and clips organized
• Power safety: disconnect power (unplug or shut off breaker) before servicing control area
• Inspect underlying switch and mounting clips during replacement; do not force parts into place

This freezer door foam assembly restores the insulated core inside a freezer door to help the door maintain proper cold retention and reduce frost. It replaces damaged or compressed foam that can compromise the door's thermal barrier. What it does:

• Replaces the insulated foam core inside the freezer door to improve thermal performance
• Helps reduce frost buildup and uneven temperatures caused by degraded door insulation
• Supports a tighter door fit by restoring original door thickness and shape
• Works with the existing door liner and outer panel to re-establish proper sealing

• Disconnect power to the appliance before starting any repairs.
• Removal of the inner door liner or outer panel is commonly required; handle panels and clips carefully to avoid damage.
• Use proper tools and keep small fasteners organized; inspect door gasket and hardware while the door is open.