Lfxs26973s Parts

This door foam assembly replaces the insulation inside a refrigerator door to help restore proper temperature retention and reduce condensation. It fits into the door liner to replace damaged or missing foam for improved cooling performance. What it does:

• Replaces deteriorated or compressed door insulation to help maintain consistent cabinet temperature
• Reduces interior condensation and frost buildup caused by broken or missing door foam
• Improves energy efficiency by restoring the door's thermal barrier
• Helps eliminate cold spots on the door that can affect stored items

• One door foam assembly

• Unplug the appliance before beginning any repairs.
• Installation typically requires removing the door liner or inner panel; keep track of fasteners and clips.
• Handle edges and clips carefully to avoid damage to the liner or gasket; use appropriate trim tools.
• If adhesive or sealant is present, carefully remove old material and clean surfaces before installing the new foam.

This guide assembly supports and guides a sliding drawer or rail-driven component so it moves smoothly and stays aligned. It restores proper tracking and reduces binding, sticking, or noisy operation from worn guides. What it does:

• Guides and supports the drawer/rail so it opens and closes evenly
• Keeps the drawer aligned to prevent scraping, sticking, or jamming
• Dampens noise and reduces vibration from loose or worn guides
• Replaces a damaged or worn rail guide that causes uneven movement

• Disconnect power and remove the drawer or panel before replacing
• Inspect mounting clips, screws, and adjacent parts; replace any damaged fasteners
• Install the new guide in the same orientation as the original; do not force parts into place

This drawer tray assembly replaces a damaged or worn storage drawer, restoring a secure shelf and smooth operation. It provides a direct-fit replacement that holds food and items safely in the appliance. What it does:

• Replaces a cracked, warped, or broken drawer tray so items sit level and secure
• Restores proper sliding and support when the drawer sticks, jams, or falls out
• Replaces trays with broken mounting tabs or rails that prevent correct seating
• Helps prevent spills and keeps contents contained when the drawer is opened

• One drawer tray assembly

• Remove contents and existing drawer before installing; align mounting tabs and slide into place
• Inspect rear and side guides for damage and clean tracks before installing the new tray
• Use care not to overtighten any fasteners; replace any broken clips or supports as needed
• If the appliance has electrical components nearby, unplug the appliance or disconnect power before working

This DC motor assembly powers the appliance's indoor fan to move air where needed. Replacing a worn motor restores proper airflow and reduces noise, helping the appliance maintain performance and temperature control. What it does:

• Spins the indoor fan/blower to circulate air through the appliance
• Restores airflow when a motor has failed or stopped running
• Reduces whining, grinding, or irregular fan noise caused by a faulty motor
• Helps resolve uneven temperatures or poor circulation tied to a bad motor

• Disconnect power to the appliance before starting any repair
• Handle wiring connectors and mounting tabs carefully; match harness connections exactly
• Inspect and secure mounting screws and blower/fan alignment during reassembly
• Test operation after installation to ensure proper airflow and sound

This replacement lever button is the user-operated push control that lets you engage the appliance's latch or control function. It restores a worn, cracked, or non-springing button so controls respond reliably. What it does

• Acts as the external push/lever used to latch, unlatch, or activate a control mechanism
• Replaces cracked, loose, or unresponsive buttons that no longer engage properly
• Helps restore normal tactile response and alignment of the control assembly
• Works with the existing actuator and mounting points — no modification required

• One replacement lever button

• High-level replacement only; remove power source before starting repair
• Handle panels and clips gently to avoid damage to trim or surrounding controls
• Verify correct button orientation before final reassembly

A small protective cap that covers and protects a component connection or opening from dirt and moisture, helping maintain proper function and prolong component life. Simple replacement when the original cap is cracked, missing, or worn. What it does:

• Covers exposed fittings, terminals, or openings to keep out debris and moisture
• Helps prevent leaks or contamination at the sealed connection
• Restores a secure fit when the original cap is cracked, split, or degraded
• Commonly used where a small, removable protective seal is required

• Inspect mating surface and surrounding gasket/seal before installing; replace other damaged parts as needed
• Press the cap firmly into place until fully seated; no special tools usually required
• Wear gloves and disconnect power or water supply if working near energized or pressurized components

This dispenser lever replaces a cracked, loose, or non-returning dispenser paddle so you can reliably activate the fridge dispenser again. Durable replacement that restores normal button/paddle operation and user control. What it does:

• Acts as the user-operated paddle that presses the dispenser switch to release water or ice
• Restores proper lever return and consistent contact with the dispenser switch
• Stops leaks, wobble, or snagging caused by a broken or worn paddle
• Helps eliminate intermittent or failed dispenser activation related to a damaged lever

• One dispenser lever

• Disconnect power to the appliance before starting; shut off the water supply if working near the dispenser
• Remove dispenser bezel/trim and any inner cover per manufacturer instructions to access the lever
• Replace the lever and confirm it moves freely and properly contacts the dispenser switch before reassembling

This customized replacement screw secures appliance components and restores proper fit and function. It's a direct-fit fastener designed for use where the OEM specifies a tailored screw to replace a worn, stripped, or missing fastener. What it does

• Fastens panels, brackets, or assemblies that use a manufacturer-specified customized screw
• Stops rattling or loose parts caused by worn or missing hardware
• Restores secure mounting for affected components
• Matches the OEM shape and thread pattern to prevent damage when used as directed

• Disconnect power and water before starting any repair
• Use the correct screwdriver or bit to avoid stripping the head
• Install by hand initially, then tighten snugly—do not overtighten to avoid thread damage
• Keep removed hardware organized so you replace parts in their original locations

A replacement cover motor that powers the refrigerator's dispenser cover, allowing the door to open and close so you can access ice and water. Replaces a worn or failed motor to restore normal dispenser cover operation. What it does:

• Drives the dispenser cover mechanism so the cover opens when dispensing and closes when idle
• Helps keep the dispenser sealed to reduce drafts and prevent pests or debris from entering
• Stops or fails to move when worn, causing a stuck, slow, or noisy dispenser cover
• Works with the dispenser linkage and gears to coordinate cover motion with user controls

• One cover motor

• Disconnect power to the appliance before beginning any repair
• Remove dispenser trim and access panel per your model's service instructions to reach the motor
• Handle gears and linkage carefully; ensure proper alignment during reassembly and test cover operation before finishing

This cover assembly protects a control board's printed circuit board (PCB) by shielding it from dust, moisture, and accidental contact. It helps keep the PCB secured and reduces the chance of shorting or damage during normal use. What it does:

• Shields the PCB from dirt, splashes, and foreign objects that can cause shorts or corrosion
• Secures the board in place to prevent movement and stress on connectors
• Helps maintain safe separation between live circuitry and user-accessible areas
• Reduces intermittent electrical issues caused by debris or loose components

• Always disconnect power to the appliance before starting any repair
• Handle the PCB and cover with care to avoid static discharge; use proper ESD precautions if available
• Align the cover to the board and fasten using the existing mounting points; do not overtighten screws
• After installation, restore power and verify normal operation

This hinge cover assembly replaces a damaged or missing hinge trim to protect the hinge mechanism and restore the appliance's finished appearance. It snaps into place over the hinge area for a clean, secure fit. What it does

• Covers and protects the hinge mechanism from dirt and debris.
• Restores the appliance's finished appearance when the original cover is cracked or broken.
• Helps prevent accidental contact with moving hinge parts.
• Common symptom: visible broken or missing hinge trim exposing the hinge.

• One hinge cover assembly.

• Disconnect power (and water, if appliance type requires) before starting any repair.
• Remove any outer panels or trim as needed to access the hinge per the appliance service instructions.
• Handle plastic trim pieces carefully to avoid cracking during removal/installation.