Lfxs28596s Parts

This Drawer Tray Assembly replaces a damaged or worn refrigerator drawer tray to restore stable storage and proper drawer operation. It helps keep food contained and prevents items from shifting or falling when opening and closing the drawer. What it does:

• Provides a stable surface for produce or stored items inside the refrigerator drawer.
• Replaces cracked, warped, or broken trays that can catch, bind, or allow items to fall.
• Restores smooth sliding and proper fit of the drawer to reduce jams and spills.

• Disconnect power to the appliance and remove food before servicing.
• Remove the drawer per your manual to access and swap the tray; handle edges carefully to avoid damage.
• Use only manufacturer-recommended parts; inspect mounting tabs and tracks for wear before reassembly.

A small protective cap that covers and protects a component connection or opening from dirt and moisture, helping maintain proper function and prolong component life. Simple replacement when the original cap is cracked, missing, or worn. What it does:

• Covers exposed fittings, terminals, or openings to keep out debris and moisture
• Helps prevent leaks or contamination at the sealed connection
• Restores a secure fit when the original cap is cracked, split, or degraded
• Commonly used where a small, removable protective seal is required

• Inspect mating surface and surrounding gasket/seal before installing; replace other damaged parts as needed
• Press the cap firmly into place until fully seated; no special tools usually required
• Wear gloves and disconnect power or water supply if working near energized or pressurized components

This customized replacement screw secures appliance components and restores proper fit and function. It's a direct-fit fastener designed for use where the OEM specifies a tailored screw to replace a worn, stripped, or missing fastener. What it does

• Fastens panels, brackets, or assemblies that use a manufacturer-specified customized screw
• Stops rattling or loose parts caused by worn or missing hardware
• Restores secure mounting for affected components
• Matches the OEM shape and thread pattern to prevent damage when used as directed

• Disconnect power and water before starting any repair
• Use the correct screwdriver or bit to avoid stripping the head
• Install by hand initially, then tighten snugly—do not overtighten to avoid thread damage
• Keep removed hardware organized so you replace parts in their original locations

A replacement cover motor that powers the refrigerator's dispenser cover, allowing the door to open and close so you can access ice and water. Replaces a worn or failed motor to restore normal dispenser cover operation. What it does:

• Drives the dispenser cover mechanism so the cover opens when dispensing and closes when idle
• Helps keep the dispenser sealed to reduce drafts and prevent pests or debris from entering
• Stops or fails to move when worn, causing a stuck, slow, or noisy dispenser cover
• Works with the dispenser linkage and gears to coordinate cover motion with user controls

• One cover motor

• Disconnect power to the appliance before beginning any repair
• Remove dispenser trim and access panel per your model's service instructions to reach the motor
• Handle gears and linkage carefully; ensure proper alignment during reassembly and test cover operation before finishing

This door magnet is the magnetic gasket strip that helps the door close securely and maintain an airtight seal, improving cooling efficiency and preventing leaks or temperature loss. What it does:

• Restores the magnetic attraction in the door seal so the door stays closed
• Helps maintain proper internal temperature by providing an airtight seal
• Reduces frosting, condensation, and energy waste caused by a weak or damaged seal
• Common symptom: door not sealing or closing firmly

• Disconnect power to the appliance before starting any repair
• Remove the door gasket or trim per the service manual to access the magnet strip
• Press or seat the magnet strip into the gasket channel; some models may require adhesive or fasteners—refer to OEM instructions

This tray cover assembly replaces a damaged or missing lid that protects and contains the appliance tray, restoring proper coverage and helping keep contents secure. It's a direct-fit replacement designed for straightforward swap-out. What it does:

• Covers and protects the tray to help prevent spills and contamination.
• Restores proper alignment and fit for trays that won't seat fully without the cover.
• Reduces stray debris from entering the tray area.
• Commonly replaces cracked, warped, or broken covers that impair function.

• Power off and unplug the appliance before starting any repair.
• Remove any items from the tray area and work on a clean, flat surface.
• Gently unclip or lift the old cover (retain any small clips or fasteners) and snap the new cover into place until fully seated.
• If any clips or adjacent parts are damaged, replace them before use; do not force the part into position.

This rail guide assembly keeps a refrigerator drawer aligned and sliding smoothly so you can open and close it without sticking or sagging. It restores proper drawer support and alignment for reliable everyday use. What it does:

• Supports the drawer on its track so the drawer slides in and out evenly
• Guides movement to prevent binding, sticking, or uneven operation
• Helps reduce noise from rubbing or misaligned drawer slides
• Restores proper drawer height and prevents sagging or catching

• Remove all contents from the drawer before beginning work
• Use basic hand tools; handle plastic parts gently to avoid cracking
• Reassemble drawer and test smooth operation before returning items to the drawer
• If the drawer is heavy or awkward, get help to avoid dropping the drawer or injuring yourself

This guide rail assembly keeps a refrigerator or freezer drawer aligned and sliding smoothly so you can open and close drawers without sticking or tilting. Replaces worn or damaged rails to restore proper drawer function and support. What it does:

• Supports and guides a refrigerator or freezer drawer along its track for smooth movement
• Prevents drawer tilt or sag that can cause binding or uneven closing
• Helps maintain proper load alignment so shelves and drawers operate reliably
• Commonly replaced when drawer scraping, sticking, or misalignment occurs

• One guide rail assembly as shown

• Basic hand tools required; disconnect power before working near electrical components
• Remove the drawer and follow OEM disassembly steps to access rail mounting points
• Inspect mating slides and mounting clips; replace any damaged hardware for best fit

This refrigerator shelf assembly replaces a cracked, damaged or missing glass shelf to restore stable storage and organization inside the fresh food compartment. The tempered glass shelf offers a flat, easy-to-clean surface for storing food and containers. What it does

• Provides a stable, level surface for groceries and containers to prevent items from tipping or spilling.
• Restores proper shelf spacing and organization when an original shelf is broken or missing.
• Easy-to-clean glass helps contain spills and simplifies refrigerator housekeeping.
• Fits into existing shelf supports and rollers to integrate with the interior shelving system.

• Remove food and any loose items from the shelf area before starting; handle glass with care and wear cut-resistant gloves.
• Lift out the damaged shelf by angling as needed to clear supports; set the replacement into the same tracks or brackets.
• Test stability before returning items to the shelf.
• If shelves use trim or clips, keep and reinstall all original trim pieces.

This vegetable tray assembly replaces the crisper drawer that stores fruits and vegetables, restoring organized storage and easy access in the refrigerator. Durable plastic construction supports produce while sliding smoothly on its track. What it does:

• Holds and organizes fruits and vegetables in the refrigerator produce zone
• Provides a removable drawer for easy loading, cleaning, and access to food
• Restores proper fit and sliding function when a cracked or broken drawer causes sticking or poor alignment
• Helps contain spills and keeps produce separated from other fridge shelves

• Remove food and empty drawer before attempting replacement
• Typically slides into tracks; lift slightly to disengage and slide out, reverse procedure to install

This tray assembly fits the refrigerator fresh room and provides a stable, easy-to-clean surface for storing fruits and vegetables. It helps contain spills and supports the fresh room drawer for organized, fresher produce storage. What it does:

• Serves as the bottom tray for the fresh room/crisper area to hold produce and containers
• Catches minor spills and drips to protect the cabinet interior
• Provides a smooth surface for the fresh room drawer to slide on and sit level
• Restores proper storage function when a cracked or warped tray reduces usability

• Unplug or disconnect power to the appliance before servicing for safety.
• Remove the fresh room/crisper drawer to access and replace the tray; reinstall the drawer afterward.
• Inspect surrounding rails and seals for damage during replacement; clean with mild soap and water.
• If the tray does not seat easily, confirm alignment and do not force to avoid breakage.