Lfxs28596s Parts

This replacement home bar door gasket creates an airtight seal around the refrigerator's beverage/access compartment to help maintain cold temperatures and reduce drafts and moisture buildup. What it does:

• Seals the home bar/door compartment to help keep cold air in and warm air out
• Reduces condensation, frost buildup and temperature fluctuations in the compartment
• Helps prevent spoiled items and improves cooling efficiency when functioning properly
• Addresses symptoms like visible gaps, air leaks, excess moisture, or a door that won't close tightly

• Clean the door channel and gasket seating area of debris and old adhesive
• Press the gasket evenly into the channel, working around the door to ensure full contact
• Test the door for an even seal and adjust as needed; unplug refrigerator only if required for access or safety

This customized pin is a precision fastener that serves as a pivot or locating point within your appliance. It helps keep mating parts aligned and moving smoothly. Replace a bent, worn, or missing pin to restore proper operation. What it does

• Acts as a pivot/axle or locating pin between connected parts
• Maintains alignment to reduce wobble and uneven movement
• Supports smooth opening/closing or rotation at the joint
• Common signs it's needed: looseness, sagging or misalignment, scraping/squeaking at the pivot, or a visibly worn/bent/missing pin

• One customized pin

• Disconnect power (and shut off water supply, if applicable) before servicing
• Support the door/panel/assembly to remove load from the pin during removal/installation
• Note the orientation and order of any spacers, bushings, or washers and transfer them to the new pin
• Apply a light lubricant and verify smooth movement before restoring power

The LG Ice Dispenser Assembly is an OEM component specifically designed for LG brand refrigerators that have automatic ice makers and dispensers. This assembly contains both the ejection shoot that directs ice cubes through the dispenser door as well as the electrical components that trigger ice ejection.  

Symptoms include:

• Ice cubes unable to dispense or get stuck inside  
• Repeated dispensing attempts not pushing out any ice
• Random dispensing of ice even when not activated
• Dispenser door issues like improper opening or closing

Causes of a bad dispenser assembly can include failure of individual solenoids, sensors or motors due to high usage over many years, or blocked ice transport pathways preventing dispensing.

This small stopper installs in the refrigerator to limit the travel of a moving component and keep it securely in place. Replacing a broken or missing stopper prevents over-extension and helps maintain smooth, aligned operation.

• Limits the range of motion for a door, bin, or drawer to prevent over-opening or accidental removal
• Helps keep interior components aligned and operating smoothly
• Replace if cracked, missing, or deformed
• Common symptoms: drawer or bin slides out too far, door swings past normal range, or a broken plastic stop is found

• Disconnect power before servicing; remove or support the affected bin/drawer/door
• Note the old stopper's orientation and location before removal
• Transfer and reuse any original screws or clips if applicable
• Snap or fasten the new stopper in place and test for smooth movement

Damper motor support secures the damper motor assembly inside the refrigerator, keeping the air-control damper aligned so it opens and closes correctly. Replacing a damaged support restores proper airflow control and reduces noise. What it does:

• Secures and positions the damper motor assembly so the air-control damper moves smoothly.
• Keeps the motor and damper aligned to help prevent rattling, grinding, or loose motor noise.
• Supports consistent airflow between compartments to assist with even cooling.
• Resolve damper movement problems like the damper not opening or closing fully.

• Disconnect power to the appliance before starting work; remove food and shelves as needed for access.
• Remove the interior access panel to reach the damper assembly; handle plastic tabs and clips gently to avoid breakage.
• Align the motor and damper during reassembly and secure all fasteners; test damper operation before replacing panels and shelving.

This center door hinge assembly replaces the pivot that lets a refrigerator door open and close smoothly, restoring proper door alignment and sealing. Designed to fit OEM mounting points for reliable operation and long-term use. What it does:

• Supports the center door pivot and maintains proper door alignment
• Enables smooth opening and closing of the affected door section
• Helps maintain an effective door seal to prevent cold air loss
• Commonly used when the door sags, binds, or makes noise at the hinge

• 1 center hinge assembly

• Installation requires removing the door and supporting it to prevent damage or injury
• Tighten mounting fasteners to the manufacturer's torque specifications; avoid over-tightening
• Disconnect power to the appliance and follow all safety precautions before beginning work

The Freezer Tray is an OEM part for LG refrigerators. It provides an open, flexible surface area within the freezer compartment for storing and organizing frozen foods. The freezer tray's material and rail design also efficiently facilitate airflow to maintain sub-freezing temperatures throughout. 

Symptoms of a faulty freezer tray include:

• Cracks or breaks that compromise structural integrity
• warping or pitting which prevents proper sealing 
• uneven temperatures due to airflow disruption

Causes of a bad freezer tray can include impact damage over time, continuous door openings and closings leading to fatigue, and temperature fluctuations compromising the material.

This OEM LG part is also compatible with Sears/Kenmore refrigerator models.

A small retaining pin used to secure moving parts and keep components aligned for smooth operation. Replacing a worn or broken common pin can stop rattling and restore proper fit between linked parts. What it does:

• Holds or aligns two parts together so they move correctly and stay in position
• Helps prevent rattling, looseness, or parts slipping out of place
• Works as a simple mechanical fastener—no electronics involved

• One common pin

• Disconnect power to the appliance before beginning any service
• Keep track of small parts; lay out components in order to aid reassembly
• May require removal of trim or a hinge/retainer to access the pin—use basic hand tools
• If the pin is difficult to seat, do not force; inspect mating parts for damage

This upper hinge assembly secures and guides the refrigerator door so it opens and closes smoothly and stays properly aligned. Replaces a worn or damaged upper hinge to reduce door sag and improve sealing performance. What it does

• Supports the top of the refrigerator door and provides a pivot point for opening and closing.
• Restores proper door alignment to help the gasket seal evenly and maintain cooling efficiency.
• Reduces rubbing, grinding, or noisy operation caused by a worn hinge.
• Helps prevent uneven wear that can lead to door sag or difficulty closing.

• Unplug the appliance and empty or support the door before removing the hinge to prevent injury or damage.
• Use proper hand tools; keep track of fasteners and any spacers or bushings that come off with the hinge.
• Check gasket condition and door alignment during reassembly; adjust per the service manual if needed.

This center hinge assembly secures and guides the refrigerator doors, restoring correct door alignment and smooth opening. Replaces worn or damaged center hinge hardware to help stop sagging and improve door sealing. What it does:

• Provides the central pivot point between the refrigerator doors for proper alignment and operation
• Restores smooth, even door movement when original hinge is worn or bent
• Helps the doors close fully to maintain the appliance seal and consistent internal temperature
• Fits the factory mounting points and matches OEM form for direct replacement

• Basic removal of trim and temporary support of the doors is required; have a helper to steady doors during replacement
• Use appropriate hand tools; avoid overtightening fasteners to prevent damage
• Disconnect power only if removing electrical components nearby; this part replacement is typically mechanical
• Inspect surrounding hinge screws and door hardware and replace if worn for best results

This replacement shelf assembly restores usable storage space and provides a stable surface for food and containers in the refrigerator. It's a direct-fit shelf designed to match the original form and function for easy restoration. What it does:

• Provides a flat, stable shelf surface so food and containers sit level and secure
• Replaces cracked, chipped, or missing shelves that cause items to slide or break
• Restores proper shelving layout to help organize interior storage
• Helps maintain even airflow and access to stored items when positioned correctly

• One shelf assembly

• Remove food and unplug the appliance before beginning any service
• Handle glass or trim sections carefully to avoid chipping or injury
• Slide into the existing shelf supports; no special tools typically required
• Replace shelf clips or supports if damaged before installing the new shelf

The Lever Cover is an OEM part for LG refrigerators. This cover fits neatly over the freezer door lock mechanism, protecting its internal lever and hardware.

Causes of a bad lever cover can include damage from regular opening and closing of the freezer door over time. Accidental impacts or heavy impacts from moving the refrigerator could also crack or weaken the plastic material.

Symptoms of a bad lever cover include:

• Exposure of the lock mechanism that allows dust and debris to enter
• Improper shielding of lock parts leading to potential jamming issues
• Cracking or breakage of the plastic allowing outside contaminants inside

This OEM LG part is also compatible with some Kenmore models.

This slide rail is a replacement drawer guide that restores smooth, stable drawer movement and helps prevent binding or sagging. Designed to match the OEM fit so drawers open and close reliably. What it does:

• Guides and supports the appliance drawer for smooth sliding motion
• Replaces worn or damaged rails that cause sticking, sticking intermittently, or uneven travel
• Helps prevent drawer tilt or sag when loaded
• Restores proper alignment for secure closing

• Disconnect power to the appliance before beginning any work
• Remove the drawer per your model's service instructions to access the rail
• Use basic hand tools (screwdriver/driver) to remove and replace the rail; keep fasteners for reuse
• Align the rail carefully, slide the drawer to test operation, and verify smooth movement before returning the appliance to service

A replacement door supporter that secures and stabilizes the appliance door assembly to restore alignment and smooth operation. Ideal when a worn or damaged bracket causes door sag, misalignment, or rubbing. What it does:

• Provides structural support to the door assembly and keeps the door properly aligned.
• Helps prevent door sag and binding that can stop the door from closing fully.
• Reduces rubbing, scraping, or noisy operation caused by a damaged or bent bracket.
• Restores correct door travel and helps maintain an even seal when the door is closed.

• Disconnect power and remove/disconnect the door before replacing the bracket.
• Use appropriate hand tools to remove mounting screws; keep original hardware unless replacement is required.
• Test door alignment and operation after installation; tighten fasteners evenly to avoid binding.
• If hinge components or mounting points are damaged, replace those parts as well to ensure proper fit and function.

This main power control board assembly manages a refrigerator's electronic functions and power distribution, restoring control when the appliance fails to start or responds intermittently. Replaces the unit that coordinates compressors, fans and user controls. What it does:

• Regulates and distributes electrical power to compressors, fans, valves and control circuits
• Processes user inputs and control signals from the user interface
• Can resolve symptoms like no power to compressor/fans, intermittent operation, or unresponsive controls
• Helps prevent erratic cycling caused by a failed control board

• 1 main power control board assembly

• Disconnect power before servicing and confirm mains are off to avoid shock
• Handle the PCB by edges and avoid touching components or connectors
• Verify connector alignment and secure mounting; confirm all harnesses are fully seated before power-up