Lfxs29766s Parts

Main control PCB assembly that manages the appliance's electronic controls, timing and user-interface signals to run cycles and communicate status. Replacing this board can restore proper control when electronics are unresponsive or erratic. What it does:

• Acts as the appliance's central control board, coordinating cycles, sensors and motor control signals.
• Processes user inputs from the control panel and sends status to displays and indicators.
• Regulates timing and sequence of operation for wash/dry/heating functions.
• Common symptoms of a failing board: unresponsive controls, error codes, random cycle starts/stops, or a unit that won't start.

• One main PCB assembly.

• Disconnect power (unplug or switch off circuit breaker) before servicing to avoid shock.
• Photograph or label connector locations before removal to ensure correct reassembly.
• Avoid touching circuit traces and components; use ESD precautions when available.

This name plate is the exterior emblem that mounts to the appliance's front panel. It replaces a missing, cracked, or faded badge to restore a clean, factory look and cover the designated trim area.

• Attaches to the outer panel to display brand/series identification
• Restores a finished appearance where the original emblem sits
• Direct replacement for a lost, damaged, or worn badge
• Typical symptoms: missing emblem, loose or broken tabs, peeling, or discoloration

• Disconnect power before servicing the appliance
• Carefully remove the old emblem; release any tabs from behind or peel away remaining adhesive
• Clean and dry the mounting surface; remove all residue for best fit
• Align with the recess/holes and press evenly until fully seated

This cover tube is a molded protective housing that shields internal components and wiring from wear, heat, and debris. It helps maintain safe operation and prevents rubbing or chafing that can lead to damage. What it does:

• Covers and protects internal wiring, hoses or assemblies from contact and abrasion
• Helps direct airflow and keeps debris away from sensitive parts
• Reduces noise caused by rubbing or loose components
• Preserves component alignment and prevents premature wear

• Disconnect power to the appliance before beginning any repair.
• Installation requires partial disassembly of the appliance; keep track of screws and clips.
• Use OEM replacement and follow the service manual for correct orientation and torque of fasteners.
• If you see damaged wiring or other compromised parts, replace or repair those items before reinstalling the cover tube.

Replacement lamp cover that protects and diffuses an appliance's interior light, restoring even illumination and shielding the bulb from spills and contact. Restores proper light output and appearance after a cracked or missing lens. What it does:

• Protects the interior light bulb from food splatter, grease, and accidental contact.
• Diffuses and evens interior illumination to reduce hot spots and glare.
• Replaces cracked, yellowed, or missing lenses that can cause dim, flickering, or exposed-bulb issues.
• Matches the original lamp housing shape and secures with the appliance's existing clips or screws.

• Always disconnect power (unplug appliance or switch off circuit) and allow the bulb to cool before beginning.
• Remove any retaining screws or clips carefully; handle the cover gently to avoid cracking.
• Seat the cover securely in the lamp housing and reinstall original hardware—do not overtighten screws.
• After installation, restore power and verify the light operates and the cover is properly seated.

This connector tube provides a sealed water path between refrigerator water components to restore proper water flow and reduce leaks. It's a direct-fit replacement when your existing connector is cracked, clogged, or damaged. What it does

• Re-establishes a secure water connection between dispenser/ice-making components.
• Restores water flow so the ice maker and dispenser can fill properly.
• Prevents drips and leaks from damaged or degraded tubing joints.
• Helps eliminate intermittent filling or reduced water flow caused by collapsed tubing.

• One connector tube.

• Disconnect power and shut off the water supply before beginning any work.
• Use proper fittings or clamps and tighten securely—avoid over-tightening plastic fittings.
• After installation, turn on the water and check all connections for leaks; discard any damaged or brittle tubing.

This cover lever replaces a damaged or worn dispenser lever cover to restore a clean, functional surface for pressing the dispenser. Helps keep debris out of the lever area and supports reliable lever actuation. What it does:

• Covers and protects the dispenser lever mechanism from chips, cracks, and debris.
• Provides a smooth contact surface for pressing the dispenser to activate water/ice dispensing.
• Helps prevent leaks or improper actuation caused by broken or warped lever covers.
• Restores cosmetic appearance at the dispenser area when the original cover is cracked or missing.

• Disconnect power and shut off the water supply before beginning any work.
• Removal typically requires accessing the dispenser bezel or door panel—use basic hand tools and retain all fasteners.
• Handle clips and tabs carefully to avoid breakage; test dispenser function after reassembly.

This replacement drawer tray assembly restores a damaged or cracked refrigerator drawer surface so stored items sit level and slide smoothly. It's a direct-fit tray used where the factory tray was broken, warped or stained. What it does

• Replaces a cracked, warped or discolored refrigerator drawer surface
• Provides a stable, level base for produce and other stored items
• Helps the drawer slide and seat correctly in the cabinet
• Restores original appearance and function without full cabinet replacement

• One drawer tray assembly

• Remove food and any loose shelving before starting; follow refrigerator power-off and safety recommendations
• Installation is typically a simple remove-and-replace of the broken tray—retain fasteners or clips and align the tray before seating
• Wear gloves to avoid cuts from sharp edges while handling broken plastic

This small stopper installs in the refrigerator to limit the travel of a moving component and keep it securely in place. Replacing a broken or missing stopper prevents over-extension and helps maintain smooth, aligned operation.

• Limits the range of motion for a door, bin, or drawer to prevent over-opening or accidental removal
• Helps keep interior components aligned and operating smoothly
• Replace if cracked, missing, or deformed
• Common symptoms: drawer or bin slides out too far, door swings past normal range, or a broken plastic stop is found

• Disconnect power before servicing; remove or support the affected bin/drawer/door
• Note the old stopper's orientation and location before removal
• Transfer and reuse any original screws or clips if applicable
• Snap or fasten the new stopper in place and test for smooth movement

Replacement fan guide that directs airflow from the refrigerator fan to improve cooling distribution and help keep the fan blade clear of nearby components. Restores proper airflow and can reduce rubbing or scraping noises. What it does:

• Channels airflow from the fan to promote even temperatures throughout the compartment.
• Keeps the fan blade aligned and away from cabinet walls and other components.
• Commonly replaced when cracked, warped, or broken parts cause rubbing or unusual fan noise.
• Helps maintain efficient cooling by restoring the intended airflow path.

• Disconnect power (unplug or shut off breaker) before servicing the appliance.
• Access typically requires removing the interior cover or rear evaporator cover.
• Handle the plastic guide carefully to avoid cracking; align mounting tabs and secure using the original fasteners.
• Inspect the fan blade and motor for damage while replacing the guide; replace any damaged components to avoid repeat issues.

A small retaining pin used to secure moving parts and keep components aligned for smooth operation. Replacing a worn or broken common pin can stop rattling and restore proper fit between linked parts. What it does:

• Holds or aligns two parts together so they move correctly and stay in position
• Helps prevent rattling, looseness, or parts slipping out of place
• Works as a simple mechanical fastener—no electronics involved

• One common pin

• Disconnect power to the appliance before beginning any service
• Keep track of small parts; lay out components in order to aid reassembly
• May require removal of trim or a hinge/retainer to access the pin—use basic hand tools
• If the pin is difficult to seat, do not force; inspect mating parts for damage

This center hinge assembly secures and guides the refrigerator doors, restoring correct door alignment and smooth opening. Replaces worn or damaged center hinge hardware to help stop sagging and improve door sealing. What it does:

• Provides the central pivot point between the refrigerator doors for proper alignment and operation
• Restores smooth, even door movement when original hinge is worn or bent
• Helps the doors close fully to maintain the appliance seal and consistent internal temperature
• Fits the factory mounting points and matches OEM form for direct replacement

• Basic removal of trim and temporary support of the doors is required; have a helper to steady doors during replacement
• Use appropriate hand tools; avoid overtightening fasteners to prevent damage
• Disconnect power only if removing electrical components nearby; this part replacement is typically mechanical
• Inspect surrounding hinge screws and door hardware and replace if worn for best results

The Lever Cover is an OEM part for LG refrigerators. This cover fits neatly over the freezer door lock mechanism, protecting its internal lever and hardware.

Causes of a bad lever cover can include damage from regular opening and closing of the freezer door over time. Accidental impacts or heavy impacts from moving the refrigerator could also crack or weaken the plastic material.

Symptoms of a bad lever cover include:

• Exposure of the lock mechanism that allows dust and debris to enter
• Improper shielding of lock parts leading to potential jamming issues
• Cracking or breakage of the plastic allowing outside contaminants inside

This OEM LG part is also compatible with some Kenmore models.

This ice maker gear drives the ejector blades that push ice from the tray into the bin. Replacing a worn or broken gear restores proper harvest cycles and stops grinding or slipping during ejection. What it does:

• Turns the ice maker ejector to release ice cubes during the harvest cycle.
• Stops or reduces grinding noises and slipping when the gear teeth are stripped or damaged.
• Helps restore regular ice production when the ejector no longer rotates.
• Works as the replacement driven gear in compatible LG ice maker gear trains.

• Disconnect power before servicing the ice maker to avoid shock or injury.
• Remove the ice maker assembly to access the gear; follow OEM instructions for disassembly.
• Inspect the mating gear, motor shaft, and ejector assembly for wear—replace additional damaged parts as needed.
• Use the matching part number to ensure fit.

A replacement slide rail that restores smooth, stable drawer operation and proper alignment. Designed to support the appliance drawer as it opens and closes, it helps reduce sticking, sagging, and uneven movement. What it does

• Provides a guided track for the drawer to slide smoothly in and out
• Restores proper alignment to prevent drawer sagging or binding
• Reduces noise and sticking during operation
• Maintains load support for safe, consistent drawer movement

• Requires basic hand tools; follow for access and disassembly
• Power off and unplug the appliance before starting any repair
• Remove adjacent trim or components carefully to avoid damage
• Replace rails in matched pairs for best performance

This lower hinge assembly secures and supports the refrigerator/freezer door at its bottom pivot, restoring proper door alignment and smooth opening. Replaces a worn or damaged hinge to help reduce sagging, rubbing, or uneven sealing. What it does:

• Provides the pivot point and mounting for the bottom of the appliance door.
• Restores correct door alignment to improve door closure and sealing.
• Helps eliminate door sag, binding, or scraping during operation.
• Durable molded/metal construction built to match OEM fit and function.

• Disconnect power and empty/secure the door before starting; prop or support the door to prevent dropping.
• Keep fasteners and alignment shims used during removal for reference; transfer any hardware only if explicitly required.
• Use basic hand tools; follow the appliance service manual for torque and alignment instructions.

This decor handle is the exterior trim piece for a refrigerator door that restores the original look and grip. It replaces cracked, scratched, or worn trim to improve appearance and provide a finished surface where the handle mounts. What it does:

• Replaces damaged or worn decorative handle trim to restore the appliance's appearance
• Covers and protects the handle mounting area from dirt and wear
• Helps provide a consistent grip surface along the door's edge
• Addresses cosmetic issues like scratches, chips, or fading

• Remove any tape or packaging and match the piece to the door before starting
• Support the door or work with a second person if needed to avoid stress on hinges
• Basic hand tools (screwdriver or nut driver) may be required to remove and reinstall mounting hardware
• Follow OEM instructions and disconnect power only if instructed for models with electrified door components