Lfxs32726s Parts

This lower hinge assembly secures and supports the refrigerator door pivot, restoring proper door alignment and smooth opening/closing. Replace a worn or damaged lower hinge to stop sagging, help seal performance, and reduce rubbing or binding. What it does:

• Provides a stable pivot point for the lower side of the refrigerator door.
• Corrects door sagging or misalignment that can cause poor sealing or uneven gaps.
• Reduces rubbing, scraping, or binding when opening and closing the door.
• Restores proper door operation after impact damage or worn hinge components.

• One lower hinge assembly

• Disconnect power and remove food from the door area before starting; support the door to prevent dropping during removal.
• Keep all original fasteners if they are undamaged; some models may reuse screws or pins.
• Use appropriate tools and take care not to damage the door finish or gasket; wear gloves to protect hands.

The Shelf Assembly is an OEM replacement part for LG refrigerators. It provides a movable shelf surface for organizing and storing items in the refrigerator or freezer compartment. 

Symptoms of a bad shelf assembly include:

• Sagging or bowing of the shelf surface 
• Difficulty in moving or removing the shelf
• Damage or cracks in the frame or wire grid
•  Inability to bear weight as intended

Causes of failure can be repeated overloading, accidental impacts, or normal wear and tear over time. 

This authentic LG shelf assembly is also compatible with refrigerators by Kenmore models.

Sheath heater is the sealed tubular heating element that produces heat for the appliance's heating circuit. Replacing a failed sheath heater restores proper heat output and helps cycles finish on schedule. What it does:

• Converts electrical energy into heat inside a sealed metal sheath to provide the appliance's primary heat source.
• Directly affects heating performance; a faulty sheath heater commonly causes little or no heat or unusually long cycles.
• Open or shorted elements can cause blown fuses, tripped breakers, or trigger thermal cutoffs.
• Visible damage, burn marks, or failed continuity are common signs the element needs replacement.

• Always disconnect power to the appliance before accessing or replacing the heater assembly.
• Test the element for continuity with a multimeter; replace if open or visibly damaged.
• Inspect related safety components (thermal fuse, high-limit thermostat, wiring, connectors) when diagnosing heat issues.
• Follow the appliance service manual for access, mounting, and torque specs.

This guide assembly lines and supports the TV's internal guide or track, helping keep the display aligned and stable for smooth operation and reduced noise. It replaces a worn, broken, or misaligned guide to restore proper panel movement. What it does:

• Provides a stable channel for the TV panel or internal components to slide or rest
• Restores proper alignment to reduce rubbing, scraping, or uneven movement
• Helps eliminate rattles or vibration caused by a loose or damaged guide
• Supports consistent operation of any sliding or guided TV mechanisms

• Disconnect power and remove the TV from its stand or wall mount before starting
• Handle the display and internal components carefully to avoid damage and ESD-sensitive parts
• Follow the manufacturer's service manual for disassembly and reassembly steps and proper fastener torque

A replacement guide rail assembly that supports and guides the appliance drawer or shelf for smooth, stable sliding and proper alignment. Restores reliable movement and helps prevent sticking or binding. What it does:

• Guides the drawer or shelf along its track for consistent, even movement.
• Keeps the sliding component aligned to prevent tilting, binding, or uneven wear.
• Provides structural support for the drawer under normal load.
• Helps restore smooth operation when worn, bent, or damaged rails cause sticking or misalignment.

• Disconnect power and remove stored items before beginning any repair.
• Use basic hand tools; avoid forcing components and do not overtighten mounting hardware.

This display power control board assembly powers and controls the appliance's front-panel display and touch/selector interface, restoring visual feedback and button responsiveness for the user control area. What it does:

• Supplies power and control signals to the front-panel display and LEDs
• Interprets button/touch inputs and relays commands to the main control board
• Common symptom: blank, dim, or flickering display
• Common symptom: unresponsive or intermittent front-panel buttons or touch controls
• Can help resolve display-related errors when diagnostics point to the UI board

• Disconnect power to the appliance before starting any work to avoid shock or damage.
• Handle the board by its edges and avoid static discharge; use an anti-static wrist strap if available.
• Remove the control panel to access and carefully unplug ribbon cables and connectors; note connector locations for reassembly.
• Only replace if diagnostics indicate the UI/display board.

This door stopper replaces the small hinge stop that limits door swing and helps the door close and latch properly. It restores correct door alignment and prevents the door from swinging past its intended range. What it does:

• Acts as a mechanical stop on the door hinge to control opening angle and reduce stress on the hinge
• Helps the door close smoothly and remain properly aligned
• Commonly replaces a cracked, worn, or missing stopper that allows over-rotation or uneven closing
• Can reduce noise and wear caused by a loose or shifting door

• Disconnect power to the appliance before servicing to avoid injury
• Replace like-for-like; removal may require removing the hinge trim or screws—keep fasteners organized
• Inspect adjacent hinge components and seals for wear while the door is removed

This drip tray catches and channels water runoff inside the appliance to help prevent pooling and minor leaks. It's a direct-fit replacement listed by the manufacturer and sold as the single tray used in the unit. What it does

• Collects condensate or defrost water and directs it to the drain area to prevent pooling.
• Helps stop water from dripping onto lower drawers, shelves or the floor.
• Commonly replaces a cracked, warped or missing tray that causes visible leaks or water buildup.
• Fits into the appliance's lower compartment where the original tray sat.

• Unplug the appliance or disconnect power before servicing.
• Remove any obstructing drawers or shelves to access the tray location; handle glass shelves carefully.
• Lift out the old tray and set the new tray into the same position; no special tools typically required.

This guide assembly positions and secures the TV's front-panel or bezel components to keep controls and trim aligned for a clean fit and reliable button access. Replaces a worn, cracked, or misaligned guide to restore proper panel seating. What it does

• Aligns and supports the TV front panel/bezel so edges meet evenly
• Holds control board/buttons or trim in the correct location
• Prevents rubbing, rattling, or gaps between bezel and chassis
• Helps maintain consistent button feel and keypad alignment

• One guide assembly

• Unplug the TV and place on a soft, stable surface before beginning
• Remove bezel or trim per service manual to access guide locations
• Keep small screws and clips organized; compare old part orientation to new

A small protective cap that covers and protects a component connection or opening from dirt and moisture, helping maintain proper function and prolong component life. Simple replacement when the original cap is cracked, missing, or worn. What it does:

• Covers exposed fittings, terminals, or openings to keep out debris and moisture
• Helps prevent leaks or contamination at the sealed connection
• Restores a secure fit when the original cap is cracked, split, or degraded
• Commonly used where a small, removable protective seal is required

• Inspect mating surface and surrounding gasket/seal before installing; replace other damaged parts as needed
• Press the cap firmly into place until fully seated; no special tools usually required
• Wear gloves and disconnect power or water supply if working near energized or pressurized components

This rail guide assembly keeps the appliance drawer or rack aligned and sliding smoothly, restoring proper movement and preventing jams or uneven wear. Designed as a direct replacement where the guide rail is damaged or worn. What it does:

• Supports and guides the drawer/rack along its track for smooth, stable travel
• Prevents binding, sticking, or uneven movement caused by worn or broken rails
• Reduces noise from misaligned or loose drawer movement
• Helps maintain proper load alignment to avoid strain on adjacent components

• Disconnect power and remove any loaded drawers or racks before starting
• Install with common hand tools; align the assembly on the track and secure fasteners as shown in the service manual
• Inspect adjacent rollers and clips for wear and replace if damaged to ensure long-term performance