Lghb2687pi7a Parts

This replacement nameplate label restores the appliance's identification and rating information so you can read model, serial, and electrical data clearly. Helps when the original label is faded, damaged, or missing. What it does

• Displays model and serial numbers, electrical ratings and safety markings for identification and service
• Replaces faded, torn, or illegible factory labels so appliance data is readable
• Helps technicians and owners confirm correct specifications during repairs or replacement parts ordering
• Does not affect appliance operation; used for identification and information only

• One replacement nameplate label

• Clean and dry the surface before applying so the label adheres and lays flat
• Align carefully; many labels are adhesive-backed and are intended for single use
• Avoid placing over gaskets, vents, or moving parts; install where original label was located

This plug seals an unused hole in an appliance cabinet or inner liner to help block drafts, pests and moisture. It restores a clean, finished appearance and prevents accidental debris entry where a fitting or fastener is not used. What it does:

• Seals unused openings in the appliance cabinet or liner to keep out dust, moisture and pests
• Helps prevent air leaks that can affect temperature stability in refrigerators and freezers
• Covers exposed holes left after removing or relocating components or fasteners
• Restores a finished look to access areas and reduces risk of small-item ingress

• One cabinet sealing plug

• Push the plug into the hole until fully seated; no special tools usually required
• Turn off and unplug the appliance before reaching into compartments or behind panels
• Inspect the hole and plug for correct fit; replace if cracked or deformed

This spring-style hose clamp secures flexible appliance hoses and helps prevent leaks by holding hose ends tightly to fittings. Reliable, low-profile design for use on drain, water, or vent hoses where a strong, consistent grip is needed. What it does:

• Provides a spring-tensioned grip to keep hoses seated on fittings and reduce leaks
• Commonly used on flexible drain or water hoses and small vent lines
• Helps maintain proper connection under normal vibration and thermal cycling
• Replaces worn, stretched, or corroded clamps that no longer hold tension

• One spring hose clamp (exact quantity as sold)

• Use pliers to expand the clamp, slide into position, then release to seat on the fitting
• Inspect hose ends and fittings for wear; replace hose if damaged before installing clamp
• Wear eye protection when compressing the clamp; keep fingers clear of the clamp's edges
• Tighten only as needed—over-compressing can damage the hose

This is a factory-style replacement screw used to secure appliance components. It restores proper fastening where the original screw is missing, stripped, or damaged so panels and assemblies stay firmly attached. What it does:

• Fastens panels, brackets, or components to the appliance frame or assemblies
• Replaces missing or damaged mounting hardware that can cause rattles or loose parts
• Provides the correct fit and thread engagement for a secure connection
• Helps maintain appliance alignment and safe operation

• Use the matching screwdriver or bit to avoid stripping the head
• Tighten until snug; do not over-torque to prevent thread or part damage
• Turn off power and remove any access panels before working on electrical components

This self-close assembly helps the appliance door latch and finish closing smoothly, reducing door slams and improving seal reliability. It replaces a worn or broken hinge cam that prevents proper self-closing action. What it does:

• Acts as the self-closing cam/hinge component that catches and guides the door during the final closing motion
• Restores consistent, controlled door closing when worn parts cause the door to stay ajar or not latch fully
• Helps improve door seal engagement by ensuring the door closes completely
• Commonly replaced when the door feels loose, binds, or fails to self-close

• One self-close assembly

• Requires removal of the door hinge/trim; for exact steps
• Handle carefully to avoid pinching; support the door during removal and installation
• Use appropriate hand tools; do not force parts—inspect adjacent hinge components for wear
• Disconnect power only if instructed for your model

This mounting bracket secures appliance components to the cabinet frame, restoring solid support and alignment. It's a straightforward replacement for worn, bent, or broken brackets that cause loose panels or misaligned doors. What it does:

• Provides structural support for interior or exterior panels and components
• Helps stop rattling or vibration caused by a loose or damaged bracket
• Restores proper alignment to doors or trim that shift due to bracket failure
• Used wherever a small metal bracket fastens parts to the appliance frame

• One mounting bracket

• Disconnect power to the appliance before servicing to avoid shock or injury
• Installation typically requires basic hand tools; keep fasteners for reuse unless replacement specified
• Handle edges and metal parts carefully to avoid cuts; consider gloves

This is a replacement outer housing cover that restores the appliance's exterior protection and appearance. It shields internal components from debris and helps maintain a finished look for the unit. What it does:

• Covers and protects internal components from dust, dirt and incidental contact
• Restores a clean, finished exterior where the original cover was cracked, warped or missing
• Helps prevent small objects from falling into internal openings
• Reduces visible wear on the appliance for a neater installation

• Disconnect power to the appliance before starting any work
• Remove any retaining screws or clips holding the old cover in place; lift or slide out gently
• Align the replacement cover carefully and re-secure with original hardware

This control assembly is the main electronic control for the oven, managing bake, broil, timer and display functions so you can restore reliable oven operation and accurate cooking controls. What it does:

• Replaces the oven's main electronic control board and keypad/display interface
• Manages oven heating cycles, bake/broil elements, timers and clock functions
• Can resolve symptoms like an unresponsive control panel, blank or erratic display, or loss of oven functions
• Works with the range's user controls to execute selected cooking modes and temperature settings

• Disconnect power to the appliance before servicing to avoid electrical shock
• Handle the assembly carefully to avoid damage to the display and connectors
• Some models require removal of the console or oven front; basic mechanical and electrical skills are usually needed

Color: Black/natural. Nylon

This genuine replacement screw secures appliance components and restores proper fit and stability. Use it to replace a missing or damaged fastener and stop panels, trim, or parts from shifting or rattling during normal use. What it does:

• Fastens and holds panels, brackets, or small components in place
• Restores secure attachment when an original screw is missing, damaged, or stripped
• Helps eliminate vibration, rattling, or loose-fitting parts
• Matches the OEM fit and function for reliable reassembly

• Use correct screwdriver or driver bit to avoid stripping the head
• Tighten until snug; avoid over-torquing which can strip threads or crack plastic
• Disconnect power and remove food or contents from appliance areas as needed before servicing
• If fastener threads are damaged, replace with the exact OEM screw rather than forcing installation

This is a replacement screw used to secure appliance panels and components. It restores proper fastening to stop rattles and keep parts aligned for reliable operation. What it does:

• Secures trim, brackets, or small panels to the appliance
• Prevents loose parts that can cause vibration, noise, or improper sealing
• Restores factory fastening where a screw is missing or damaged
• Simple, single-purpose fastener — use where the original screw was installed

• Use the matching screwdriver or bit to avoid stripping the head
• Do not overtighten; snug until secure to prevent thread or component damage
• Disconnect power or follow appliance safety steps when working near electrical components
• Replace only the screw(s) that match the original size and type