Lghb2687pi7a Parts

This genuine replacement screw restores a secure hold for panels, trim, or internal components. It replaces worn or missing fasteners so parts stay aligned and appliances operate safely. What it does:

• Fastens panels, brackets, or trim into place
• Replaces stripped, missing, or damaged screws
• Helps stop rattling, loose panels, or misaligned trim
• Fits OEM mounting locations that require the specified machine screw

• Use the correct driver to avoid stripping the head
• Hand-start the screw, then tighten to firm snug; do not over-torque
• Disconnect power to the appliance before accessing internal components
• If other fasteners are damaged, inspect and replace as needed

This ice container assembly catches and stores ice made by the freezer ice maker so cubes stay contained and move to the dispenser or bin for use. Replaces cracked, warped or broken ice bins to restore proper ice storage. What it does:

• Holds and guides ice from the ice maker into the storage area so cubes stack and dispense correctly
• Prevents ice spillage and clogging from damaged or cracked containers
• Restores the proper alignment and movement of the ice auger/dispense path when the original bin is broken or misshapen
• Works with the freezer's ice delivery components to keep ice contained and accessible

• Disconnect power to the appliance before starting any service
• Remove shelves or access panels as needed for clear access to the ice bin area
• Handle the replacement bin carefully to avoid damage to the mounting tabs and guides
• Reinstall components in reverse order, restore power, and run a test cycle to ensure proper operation

This door gasket is a direct-fit replacement seal that restores the refrigerator door's airtight closure to help maintain temperature control and reduce energy loss. Designed to replace a worn, cracked, or misshapen seal for improved performance. What it does:

• Creates an airtight seal around the door to keep cold air in and warm air out
• Helps prevent frost buildup and condensation inside the compartment
• Supports consistent cooling and can reduce compressor run time caused by leaks
• Addresses common symptoms like warm spots, excessive cycling, and visible gaps around the door

• One replacement door gasket

• Inspect door frame and mounting channel for damage or debris before installing
• Clean mating surfaces and allow them to fully dry for the best seal
• Gaskets may require gentle stretching or warming to seat evenly; avoid sharp tools that could nick the gasket
• If the door or frame is bent/damaged, gasket replacement may not fully resolve sealing issues.

This replacement mounting screw fastens panels and components in compatible Frigidaire appliances to restore secure assembly and reduce rattling or loose parts. Simple fastener sized for the original factory location. What it does:

• Secures panels, brackets, or trim to keep parts aligned and stable
• Prevents vibration and noise caused by loose fittings
• Restores proper attachment after repair or disassembly
• Matches the OEM thread and length for a correct fit when specified

• Use the correct screw hole and do not force; cross-threading can damage components
• Tighten to a snug fit—do not overtighten to avoid stripping threads or cracking plastic
• Power tools can be used with care; slow speed and proper bit help prevent slippage
• Turn off power and disconnect the appliance before accessing internal parts

This interior divider separates and organizes items on a refrigerator shelf or inside a drawer so food stays orderly and doesn't shift during normal use. It restores the original partitioning function of the compartment. What it does:

• Provides a stable partition to separate foods and containers
• Keeps items from sliding together or tipping when the door or drawer is opened
• Replaces cracked, warped or missing dividers that no longer hold position
• Restores intended organization and usable space of the shelf/drawer

• Fits into the shelf or drawer track; no tools generally required for removal or reinstallation
• Inspect surrounding clips or tracks for damage and clean area before installing
• Handle gently to avoid cracking the plastic; align tabs and press until secure

This Mullion harness routes electrical connections through the refrigerator door mullion so lights, sensors and control/LED assemblies communicate with the main cabinet wiring. It restores reliable power and signal routing in the door center strip. What it does:

• Carries power and signal between the door/mullion components and the main harness
• Restores non-functioning mullion lights, LEDs or control communication caused by a damaged harness
• Prevents intermittent connections from frayed or broken mullion wiring
• Used when visible wire damage or connector failure is found in the mullion area

• One (1) mullion harness as pictured

• Disconnect power to the appliance before starting work to avoid shock or injury
• Remove the mullion/door trim and any gaskets per service instructions to access the harness
• Inspect connectors and wire routing; replace any clips or retainers to prevent pinching

This is a replacement screw used to secure appliance panels and components. It restores proper fastening so panels, trim, or assemblies stay tight and reduce vibration or rattling. What it does

• Fastens panels, brackets, or trim to the appliance chassis
• Helps stop loose or vibrating panels and trim pieces
• Restores proper alignment where a missing or stripped screw causes gaps or movement
• Use when the original screw is missing, damaged, or corroded

• One replacement screw as shown

• Disconnect power to the appliance before starting any repair
• Use the correct screwdriver or bit to avoid stripping the screw head
• Tighten until snug; avoid over-torquing which can strip threads or crack plastic
• Keep removed screws in a safe place; this screw matches the original before installation

This replacement ice container catches and stores cubed ice from the refrigerator's icemaker, keeping ice accessible and organized in the freezer. It restores proper ice pickup and reduces spills from loose ice. What it does:

• Holds and stores made ice from the icemaker so you can reach and dispense cubes easily
• Guides ice from the icemaker into a single bin to prevent jamming or scatter
• Helps maintain proper ice pickup by the dispenser/auger (when applicable)
• Commonly used when the original bin is cracked, warped, or missing

• One ice container

• Disconnect power to the appliance before removing or installing the ice container
• Slide out the old bin straight from the freezer compartment or remove any retention clips as needed
• Inspect surrounding components for damage before reinstalling
• Handle with care to avoid cracks; no special tools typically required

This rubber grommet cushions and secures appliance components, reducing vibration and wear while helping maintain proper alignment. It's a small replacement part that restores quiet operation and prevents metal-on-metal contact. What it does:

• Cushions or isolates moving parts to reduce noise and vibration
• Provides a snug mount or seal where components pass through panels
• Helps keep trim, panels or wiring from rubbing and wearing
• Commonly replaced when parts become loose, cracked, or noisy

• Disconnect power before attempting any repair.
• Access may require removing a panel or trim piece; use trim tools to avoid damage.
• Ensure the grommet seats fully in the mounting hole and that retained parts align correctly.
• Replace if torn, hardened, or deformed; do not install a damaged grommet.

This dispenser wiring harness connects the dispenser controls and components in the refrigerator door, restoring electrical continuity for the dispenser functions and simplifying replacement of a damaged or faulty harness. What it does:

• Carries power and signals between the dispenser switches, valve/solenoid, and indicator lights
• Replaces frayed, pinched, or damaged wiring that can cause intermittent or no dispenser operation
• Addresses symptoms like non-working water/ice dispenser, no dispenser lights, or unresponsive dispenser switches
• Provides factory-style connectors for a direct, plug-and-play replacement

• One dispenser wiring harness

• Disconnect power to the appliance before beginning any work to avoid shock
• Remove the inner door panel or dispenser bezel per your model's service instructions to access the harness
• Match connectors and routing to the original harness; avoid stretching or pinching wires when reinstalling
• Test dispenser functions after installation and reassemble panels securely

This stainless replacement drawer restores a clean, durable storage surface and appearance for compatible refrigerator drawers. Designed as a direct-fit cabinet drawer to replace a cracked, dented, or worn drawer front. What it does:

• Replaces a damaged or dented stainless refrigerator drawer to restore function and look
• Provides a durable, easy-to-clean storage surface for refrigerated items
• Stabilizes stored items and maintains proper fit with existing drawer slides and cabinet
• Helps eliminate sharp edges or breaks that can catch produce or packaging

• Empty drawer and remove any loose shelves or items before installation
• Follow OEM disassembly steps; some models require removing trim or sliding hardware
• Use basic hand tools; avoid force to prevent damage to surrounding trim or slides

This shelf channel is the metal/plastic support that secures and aligns a refrigerator shelf or door bin, helping keep stored items stable and properly positioned. It restores proper shelf fit and prevents sagging or misalignment. What it does:

• Provides a secure mounting track for a refrigerator shelf or door bin
• Supports shelf weight to prevent bowing, shifting, or falling
• Keeps the shelf aligned so items sit level and doors close smoothly
• Helps restore original shelf fit after damage or wear

• One shelf channel mounting piece

• High-level replacement; inspect adjacent clips and fasteners and replace if damaged
• Use proper hand tools; avoid overtightening to prevent cracking
• Disconnect power only if working near electrical components; otherwise power removal is not typically required

This replacement cover restores the exterior housing appearance and protection for the appliance where the original cover is damaged or worn. It helps keep internal components shielded from dirt and debris and maintains a finished look. What it does:

• Replaces a cracked, chipped, or missing housing cover to protect internal parts
• Helps prevent dust and spills from reaching sensitive components behind the cover
• Restores a clean, finished appearance to the appliance front or panel area
• Compatible with the appliance's original mounting points when the correct PN is used

• Remove power to the appliance before beginning any work to avoid electrical shock
• Use appropriate screwdrivers or trim tools to remove retainers without damaging surrounding trim
• Handle part carefully to avoid scratching the finish; align mounting tabs before tightening fasteners

This slide assembly is the replacement drawer slide that guides and supports a refrigerator/freezer drawer for smooth opening and closing. Restores proper drawer alignment and reduces binding or falling drawers. What it does:

• Replaces worn or broken drawer guide hardware so the drawer tracks smoothly.
• Helps prevent the drawer from sticking, falling forward, or becoming misaligned.
• Restores stable support for loaded drawers to improve access and operation.
• Reduces scraping, grinding, or noisy drawer movement when operating the drawer.

• One slide assembly (single drawer slide) as pictured.

• Disconnect power to the appliance or unplug before starting work.
• Remove contents and fully remove the affected drawer per your appliance's service instructions before replacing the slide.
• Support the drawer and remove any fasteners holding the old slide; install new slide in the same orientation and secure fasteners tightly.