Lghb2968tf5 Parts

This anti-twist pin secures mating parts to stop unwanted rotation and keeps linked components aligned for reliable operation. Replace a worn or broken pin to restore proper fit and reduce twisting, rubbing and noise. What it does:

• Keeps connected components from rotating or shifting, preserving alignment and part engagement.
• Helps prevent rubbing, scraping, or noisy operation caused by a loose or missing pin.
• Replaces a damaged or worn locating/retention pin that can allow assemblies to bind or move out of position.
• Simple mechanical replacement that restores intended part geometry and fit.

• Disconnect power to the appliance before servicing to avoid electrical or motion hazards.
• Remove any covers or panels as needed to access the pin; keep track of fasteners and orientation.
• Install the pin in the same orientation as the original; components move freely and are properly engaged before reassembly.

This support beam is a structural cabinet brace that stabilizes the refrigerator's interior frame and restores proper alignment of doors, drawers and shelves, helping reduce sagging, vibration and unusual noises. What it does:

• Reinforces the cabinet/frame so internal components stay square and aligned
• Helps prevent doors and drawers from sagging or binding
• Reduces rattling or vibration caused by a bent or missing brace
• Common symptom indicators: visible bend or gap, uneven door fit, or persistent noise from the cabinet area

• Disconnect power and remove food/contents from the affected area before starting any repair
• Basic hand tools typically required; follow the manufacturer's service manual for correct fastener torque and placement
• Handle carefully to avoid scratching the finish; inspect surrounding mounting points and replace damaged fasteners as needed

This rivet is a metal fastener used to permanently secure panels, brackets, or internal components in your appliance. Replacing a damaged or missing rivet restores a tight fit and helps prevent vibration, rattles, and looseness.

• Permanently joins thin metal parts where screws or nuts aren't used
• Maintains alignment and structural integrity of housings and frames
• Helpful when panels or components are loose, rattling, or won't stay secured
• Direct replacement for a worn, broken, corroded, or drilled-out factory rivet

• Disconnect power and shut off gas/water (as applicable) before servicing
• Support the part being fastened; drill out the old rivet head if needed
• A hand riveter/rivet tool may be required to set the new rivet
• Wear eye and hand protection during drilling/riveting

The Hinge Assembly is an OEM replacement part for Frigidaire refrigerators. It is the mechanism that allows the refrigerator doors to open and close properly. The hinge assembly consists of metal brackets, pins, and bushings that connect each door to the fridge cabinet and facilitate smooth swinging movement. 

Causes of a bad hinge assembly can include wear from years of operation, excessive weight on door racks damaging components, or damage if the refrigerator is moved improperly.  

Symptoms of a bad hinge assembly include:

• Doors that do not close or align securely  
• Gaps that compromise the refrigerator seal 
• Noisy or rough door movement
• Doors difficult to open, especially when full or heavy

As a major moving component, hinges can degrade over time. Replace with this genuine OEM part to restore proper door function for Frigidaire refrigerators. It fits models also compatible with Electrolux, Gibson, Kelvinator, and Kenmore designs.

The Control Board is an OEM replacement part for Frigidaire refrigerators. It acts as the brain of the appliance, controlling and regulating various functions and components within the refrigerator. This electronic board receives inputs from sensors and user controls, and sends out signals to operate the compressor, fans, defrost cycle, and other systems accordingly.

Symptoms of a bad Control Board include:

• The refrigerator not cooling or maintaining the set temperature
• Display or control panel not functioning properly
• Unusual noises or error codes
• Failure of specific features or components (e.g., ice maker, water dispenser)

Causes of a bad control board can range from electrical malfunctions or power surges, to physical damage from moisture or impact. Over time, the board's internal components can also degrade or fail due to normal wear and tear.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore refrigerator models.

This factory replacement screw secures panels, brackets, or trim on your appliance so parts stay tight and aligned. Swap in a new screw when one is missing or stripped to restore a solid, rattle-free fit.

• Fastens compatible panels, brackets, handles, or internal hardware
• Helps maintain proper alignment and stability
• Common fix for loose or wobbly handles/trim, rattling noises, or missing hardware
• Replace if threads are stripped, head is damaged, or corrosion is present

• Disconnect power before servicing; wear cut-resistant gloves
• Use the correct screwdriver or nut driver to avoid stripping
• Start threads by hand to prevent cross-threading
• Tighten until snug; do not overtighten

This #8-32 x 3/8 screw secures appliance panels, brackets, and assemblies. Replace a missing or stripped fastener to keep parts tight and aligned, reduce vibration, and restore proper fit in compatible refrigerators and freezers.

• Machine-thread fastener sized #8-32, 3/8-inch length
• Secures control housings, trims, covers, and support brackets per model design
• Replaces missing, worn, or corroded screws that cause loose or rattling parts
• Helps maintain alignment and stability after service

• Unplug the appliance; shut off water if applicable
• Match thread size to the original and start by hand to avoid cross-threading
• Use the correct driver; do not overtighten, especially into plastic
• Verify component alignment and operation after fastening

• Thread size: #8-32
• Length: 3/8 inch

This light switch controls the appliance interior lamp so you can turn the interior light on and off for loading, unloading, or inspecting contents. Replaces a worn or failed lamp switch to restore reliable light control. What it does:

• Opens and closes the lamp circuit to power the interior light
• Commonly fixes lamps that won't turn on or stay on unexpectedly
• Restores user control of interior lighting without replacing the lamp
• Fits factory switch location and mounting for a proper fit and function

• Disconnect power to the appliance before starting any repair.
• Basic tools are usually required; access panels or control panel removal may be needed.
• Handle wiring carefully and match wire connections exactly; secure all fasteners.

This slide replaces a worn or broken drawer slide to restore smooth, secure drawer movement and proper alignment. It lets the drawer open and close reliably, improving access and preventing jams or sagging. What it does

• Guides and supports the drawer for smooth in-and-out movement
• Replaces a bent, worn, or broken slide that causes sticking or uneven travel
• Helps prevent the drawer from catching, binding, or dropping out of its track
• Restores proper drawer alignment and load-bearing stability

• Slide (single)

• Disconnect power to the appliance before servicing to avoid shock or injury
• Remove contents and the drawer per the appliance manual before replacing the slide
• Use common hand tools; retain all fasteners and match orientation to the old slide during install

Replacement cover that restores appliance appearance and protects internal components from dirt and damage. Installs in place of a worn, cracked or missing cover to keep controls and wiring safely concealed and the unit looking finished. What it does:

• Protects the control area and internal components from spills, dust, and accidental contact.
• Hides and secures wiring and mounting points to prevent snagging or tampering.
• Restores the appliance's finished look when the original cover is scratched, cracked, broken, loose, or missing.
• Helps reduce the chance of debris entering sensitive areas that can affect performance.

• One replacement cover.

• Disconnect power (unplug or shut off circuit breaker) before attempting any service.
• Basic hand tools are typically required; support the cover while removing fasteners to avoid dropped parts.
• Handle edges carefully to avoid cuts and to prevent scratching adjacent surfaces.
• Refer to the appliance's service manual or model-specific instructions for exact removal and reinstallation steps.

This main power control board supplies and manages electrical power to the appliance's control systems, enabling proper operation of the user interface and key functions. Replaces a failed or damaged control board to restore normal power control. What it does

• Distributes incoming power to the appliance's control circuits and relays.
• Interfaces with user controls and timers to enable commanded functions.
• Can cause power-related symptoms such as no display, unresponsive controls, or intermittent operation.
• Replacing the board often resolves electrical-control failures caused by burnt components or connector damage.

• One main power control board assembly.

• Disconnect all power at the breaker or unplug the appliance before starting.
• Take photos of wiring and connector locations for correct reassembly.
• Handle the board by the edges and avoid touching components; protect against static discharge.

The Water Tube Kit is an OEM part for Frigidaire refrigerators. As an integral part of the ice maker system, the flexible tubing transports water from the external water supply to the internal ice maker assembly. 

Symptoms of a bad water tube kit include: 

• Slow or incomplete ice production when the ice maker is engaged
• Water leaks detected inside the refrigerator compartment  
• Disconnection between the external water source and ice maker assembly

Causes may involve cracked or split tubing from repeated flexing during years of use, degraded connectors coming loose from vibrations, or punctures from impact or rodent damage.

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Hinge Assembly is an OEM replacement part for Frigidaire refrigerators. It is the mechanism that allows the refrigerator doors to open and close properly. The hinge assembly consists of metal brackets, pins, and bushings that connect each door to the fridge cabinet and facilitate smooth swinging movement. 

Causes of a bad hinge assembly can include wear from years of operation, excessive weight on door racks damaging components, or damage if the refrigerator is moved improperly.  

Symptoms of a bad hinge assembly include:

• Doors that do not close or align securely  
• Gaps that compromise the refrigerator seal 
• Noisy or rough door movement
• Doors difficult to open, especially when full or heavy

As a major moving component, hinges can degrade over time. Replace with this genuine OEM part to restore proper door function for Frigidaire refrigerators. It fits models also compatible with Electrolux, Gibson, Kelvinator, and Kenmore designs.

This slide assembly replaces a worn or damaged drawer glide to restore smooth, stable drawer movement and proper alignment. It helps drawers open and close without sticking or falling out. What it does:

• Guides and supports a refrigerator or freezer drawer for smooth sliding action
• Prevents drawers from binding, sagging, or coming off the track
• Reduces noise and uneven movement caused by a damaged glide
• Restores proper drawer alignment for secure storage

• Unplug the appliance or disconnect power before starting any repair
• Empty the drawer and remove it according to the appliance's service instructions
• Retain and reuse any factory screws or clips unless replacements are specified
• Install orientation must match the original part; test drawer movement before returning contents

This flat metal washer provides a durable spacer and load-distributing surface for a matching fastener, helping secure assemblies and reduce wear. It's a small but essential hardware piece for routine repairs and reassembly. What it does:

• Distributes fastening load to protect softer materials and prevent pull-through
• Creates a smooth bearing surface for nuts and bolts to seat evenly
• Helps reduce vibration and loosening in moving assemblies
• Commonly used on panels, brackets, and mounting hardware where a flush fit is needed

• One flat metal washer as shown

• Disconnect power and water (if applicable) and access the assembly before replacing hardware
• Use the matching bolt/nut size and washer ID/OD for correct fit; do not force oversized fasteners
• Hand-start fasteners to avoid cross-threading, then tighten to the equipment manufacturer's spec
• Keep small parts secure during disassembly to avoid loss or damage