Lghx2636td0tfa Parts

This lower kickplate grille covers the refrigerator's toe-kick opening to protect components and finish the appliance's front. It restores appearance and maintains proper airflow through the cabinet bottom. What it does:

• Covers and protects the lower front area and components behind the toe kick
• Helps direct airflow under the cabinet where condenser/venting passages are located
• Replaces cracked, broken, bent, or missing lower grille pieces that leave the opening exposed
• Restores a finished look to the appliance front

• One lower kickplate grille

• Disconnect power to the appliance before starting any work
• Remove the old kickplate by releasing retained clips or fasteners, then align and secure the replacement
• Use gentle pressure to avoid bending the grille or damaging adjacent finishes
• Replace with OEM-specified hardware

This genuine replacement screw secures appliance components and restores proper fit and stability. Use it to replace a missing or damaged fastener and stop panels, trim, or parts from shifting or rattling during normal use. What it does:

• Fastens and holds panels, brackets, or small components in place
• Restores secure attachment when an original screw is missing, damaged, or stripped
• Helps eliminate vibration, rattling, or loose-fitting parts
• Matches the OEM fit and function for reliable reassembly

• Use correct screwdriver or driver bit to avoid stripping the head
• Tighten until snug; avoid over-torquing which can strip threads or crack plastic
• Disconnect power and remove food or contents from appliance areas as needed before servicing
• If fastener threads are damaged, replace with the exact OEM screw rather than forcing installation

The Condenser Coil is an OEM part for Frigidaire refrigerators. The condenser coil works to expel heat from inside the refrigerator and transfer it to the outdoor condenser unit. Proper functioning of the condenser coil is vital for cooling efficiency and maintaining the desired temperatures inside the refrigerator and freezer compartments.

Causes of a bad condenser coil can include a buildup of dirt and dust over time obstructing airflow, or physical damage from handling that compromises the coil integrity.

Symptoms of a bad condenser coil include:

• Inefficient or ineffective cooling
• Higher compressor run times and electricity usage
• Fluctuating interior temperatures
• Frost or ice buildup in unusual areas
• Unusual noises from the refrigeration system

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This is a replacement electrical plug used to reconnect a wiring harness to an appliance component, restoring a secure electrical connection and helping stop intermittent power loss or component failure. What it does:

• Provides a secure electrical connection between wiring and the appliance component
• Replaces a cracked, burned, or loose plug that can cause intermittent operation
• Helps restore power to the affected component when failure is due to a faulty connector
• Prevents arcing or poor contact that can lead to overheating or component malfunction

• Disconnect power to the appliance before starting any repair to avoid shock or injury
• Handle wiring and terminals carefully; do not force connectors into place
• If wiring or terminals are damaged, repair or replace them rather than relying solely on a new plug

This water fill cup directs the incoming water from the valve into the ice maker mold so the ice tray fills cleanly. It helps restore reliable ice production by guiding water where it's needed and reducing spills. What it does:

• Funnels water from the fill valve into the ice maker mold for even fills
• Prevents water from splashing or leaking inside the ice maker cavity
• Helps stop underfilled or overflowing ice trays that cause poor ice production
• Works with the ice maker's fill cycle to maintain consistent ice sizes

• One fill cup

• Disconnect power to the refrigerator and shut off the water supply before starting
• Handle the cup gently; align tabs/slots and press into place until it snaps securely
• Inspect and replace any worn seals or gaskets you encounter during installation

A replacement water tube that routes water from the household supply to the refrigerator's dispenser and/or ice maker, restoring reliable water flow and preventing leaks when the original line is damaged. What it does:

• Carries potable water between the inlet valve, dispenser, and ice maker.
• Replaces cracked, split, or clogged tubing that can cause leaks or reduced water flow.
• Helps stop intermittent or continuous dripping from inside the cabinet when the tube is compromised.
• Supports proper ice production and steady dispenser flow when intact.

• One water tube

• Disconnect power and shut off the water supply before beginning work.
• Access may require removing interior panels or the back cover; handle plastic fittings and clips gently to avoid breakage.
• Inspect related fittings, grommets and clamps for wear; replace if damaged to prevent future leaks.

This upper hinge cover protects and conceals the refrigerator's top door hinge for a finished look and safer edges. It restores proper appearance after damage or wear and helps keep the hinge area clean. What it does:

• Covers the upper door hinge to hide hardware and reduce dirt buildup
• Protects fingers and clothing from exposed hinge parts
• Restores cabinet appearance when the original cover is cracked or missing
• Works with the existing hinge assembly; does not affect door alignment when intact

• One upper hinge cover

• Designed to snap or slide into place over the upper hinge; may require removing the hinge trim or loosening the hinge for access
• Use basic hand tools; avoid over-tightening hinge fasteners after reassembly
• Disconnect power to the appliance if required for safe access to the hinge area
• Replace damaged components before installing the cover

This clear glass shelf provides a sturdy, easy-to-clean surface for organizing refrigerator contents and maximizing usable storage space. It replaces a worn, cracked, or missing shelf to restore proper shelving support and visibility. What it does

• Supports food and containers on a stable, flat surface to help keep items organized
• Maintains visibility with clear glass for quick identification of stored items
• Replaces damaged, cracked, or missing shelving that can affect storage use
• Helps maintain proper airflow and spacing when installed in correct shelf slots

• One clear glass shelf

• Handle with care to avoid chipping or breakage; wear cut-resistant gloves if needed
• Slide into existing shelf tracks or rest on shelf supports per appliance design
• Verify correct shelf position and secure supports before loading with items
• Disconnect power only if accessing shelves requires removing interior panels—otherwise no electrical work needed

This tension spring provides the restoring force needed for a moving appliance component, helping the part return to its normal position and restoring proper balance for smooth operation. What it does

• Provides tension to assist a hinged or moving component in returning to position
• Restores balance so doors, lids or levers open and close smoothly
• Helps prevent slamming or drooping of the attached component
• Common symptom: component won't stay open, won't return, or moves unevenly

• One tension spring

• Replace with the exact OEM spring number to ensure fit and safe operation
• Use proper tools and keep hands and fingers clear of stored energy when removing/ installing springs
• Disconnect power before working on electrical or moving parts

This channel-shelf mounting piece secures a refrigerator shelf in its track, keeping shelves stable and aligned for safe storage. Fits into the shelf track to support glass or wire shelves and prevent shifting during use. What it does:

• Provides a secure track for sliding or fixed refrigerator shelves
• Holds shelf edges level to prevent items from tipping or falling
• Helps maintain proper shelf spacing and alignment inside the cabinet
• Commonly replaced when the shelf no longer seats or the channel is cracked or bent

• Use basic hand tools; remove the shelf before removing or installing the channel
• Inspect adjacent clips and shelf supports for wear and replace if needed
• Handle glass shelves carefully to avoid breakage during installation

This genuine replacement clip secures appliance components to keep panels and small parts aligned and stable, restoring fit and function. It's a small, durable fastener used where a simple snap or hold is required. What it does

• Holds trim, panels, or small components in place to prevent rattling or misalignment
• Restores secure fit where a damaged or missing clip causes loose parts
• Helps stop vibration noise caused by unsecured pieces
• Small, direct-fit part—replaces a single broken or lost clip

• Disconnect power to the appliance before starting any repair.
• Access may require removing trim or panels; keep track of fasteners.
• Press or snap the clip into place; do not force beyond fit—if it won't seat, recheck alignment.
• Wear gloves and eye protection to avoid cuts from sharp edges.