Lmv1762/01 Parts

The TEMPLATE is an OEM part for LG microwaves. It is the outer casing and control panel covering that defines the microwave's design and aesthetics.  

The causes of a bad template can include cracks, dents, or damage to the outer surface from impacts or normal wear over time. Heat and humidity fluctuations can also cause template materials to degrade.

Symptoms of a bad template include:

• Cracks or breaks in the template material
• Loose, misaligned, or damaged control panel or display  
• Yellowing, warping, or discoloration of plastics
• Openings or gaps that compromise the microwave structure

This genuine OEM LG replacement part restores the microwave's appearance and protects internal components. It is also compatible with some Kenmore and Sears microwaves
 

This microwave lamp holder secures the light bulb and provides the electrical connection, helping restore dependable lighting for cooking and checking food. Replace a cracked, heat-darkened, or loose socket to address a light that won't turn on or flickers.

• Holds and insulates the bulb while connecting it to the microwave's wiring
• Common symptoms include no light, flickering, intermittent operation, or visible burning/cracking of the socket
• Restores solid electrical contact so the light works with the door or light switch
• Direct replacement for a damaged or worn lamp holder on select units

• Disconnect power at the breaker or unplug the appliance before servicing; microwaves contain high-voltage components
• Access location varies by model; note wire positions, transfer wires to the new holder, and secure with the original mounting hardware
• Restore power and test the light before fully reassembling

This fuse assembly replaces a blown thermal fuse to restore overheat protection and help a dryer heat safely. It's the direct-fit component used in the appliance's safety circuit to shut off power if temperatures get too high. What it does:

• Interrupts power when excessive heat is detected to prevent overheating or fire risk
• Stops heating when the thermal element fails or air flow is restricted
• Commonly used when the dryer won't heat or trips the house circuit
• Works as part of the appliance's safety/temperature control system

• Disconnect power before inspecting or replacing the fuse to avoid shock or injury
• Replace only with the exact part number to retain OEM safety ratings
• Handle with care; do not attempt repairs on wiring or connectors
• After replacement, test the appliance on a short cycle and monitor for normal operation

The Transformer is an OEM part for LG microwaves. It is responsible for stepping down high voltage current from the wall outlet to safe low voltage used by the microwave's electronic control system. Located inside the microwave cabinet beneath the turntable mechanism, the transformer supplies precise power to crucial components including the magnetron, control console, and touch controls.

Causes of a transformer failing include stresses from constant heating and electromagnetic flux over many years, damage from water damage, or manufacturing defects.  

Symptoms of a bad transformer include:

• Microwave failing to heat or function 
• Faulty or unresponsive control panel and display
• Buzzing or humming noises emanating from inside

This genuine LG replacement ensures all electronic systems receive stabilized power safely. Compatible with Sears/Kenmore branded microwaves using LG components.

This is a truss-head tapping screw used to secure trim, panels, and small assemblies on compatible LG appliances. It provides a low-profile, wide-bearing head that helps hold parts flush and resist pull-through. What it does:

• Fastens plastic and sheet-metal components where a self-tapping thread is needed
• Truss head spreads load to prevent damage to soft or thin materials
• Helps secure control panels, brackets, or trim pieces that require a low-profile head
• Common replacement when original mounting screws are missing, stripped, or corroded

• One truss-head tapping screw

• Use the correct screwdriver bit and moderate torque to avoid stripping the screw or workpiece
• Start threading straight and let the screw form threads without forcing at an angle
• Disconnect power and follow appliance-specific service safety procedures before working internally
• Replace any damaged mating threads or clips for a secure fit

This keypad controller assembly replaces a worn or unresponsive control panel keypad to restore reliable button input and cycle selection on compatible LG appliances. It provides the complete user-interface board used to send commands to the appliance control system. What it does:

• Registers button presses and relays user commands to the main control board
• Restores response when touch-buttons or mechanical keys stop working
• Can resolve intermittent or no-response control panel behavior
• Works as the integrated keypad and circuit assembly for the control panel

• Disconnect power to the appliance before starting any repair
• Handle the PCB and ribbon cable by edges and avoid static discharge
• Keep all fasteners and grounding wires for reinstallation; align ribbon connector fully before securing

This power control board assembly replaces the appliance's main power/control PCB to restore reliable power distribution and control logic. It helps the unit run cycles and respond correctly to user inputs when the original board fails. What it does:

• Regulates and distributes power to motors, valves, and user-interface components
• Processes control signals and runs programmed cycles for normal operation
• Can stop error-code-driven lockouts caused by a failed control board

• Disconnect all power (unplug or switch off breaker) before starting any work
• Take static-discharge precautions and handle the PCB by its edges
• Note connector locations and take photos before disconnecting wiring harnesses

This customized screw fastens specific panels, brackets, or internal components in LG appliances. Replacing a missing or stripped fastener restores a secure fit and helps reduce vibration, rattling, and premature wear. What it does:

• Secures mating parts such as panels, brackets, or mounts per the appliance design
• Restores proper fit when the original screw is lost, damaged, or stripped
• Helps reduce vibration and rattling from loose components
• Maintains alignment to support correct operation of the assembly

• Includes: One screw

• Disconnect power and, if applicable, shut off water and gas supplies before servicing
• Match length and thread to the original; start by hand to avoid cross-threading
• Use the correct driver size and tighten snugly without over-torquing
• Inspect and replace any damaged clips, inserts, or mating threads before reassembly

The Microwave Mounting Hardware Kit is an OEM part for LG microwaves. This kit contains all of the necessary hardware to properly mount and install an LG microwave. It ensures that the microwave is securely fastened to the cabinet or installed above the range.

Causes of faulty mounting hardware include lack of proper installation, missing or lost pieces over time, or damage.

Symptoms of missing or damaged mounting hardware include:

• Microwave not sitting securely on the mounting plate or surface
• Movement or wobbling of the microwave during operation
• Risk of the microwave falling if not properly secured

This LG part is also compatible with some Kenmore models.

This is a complete replacement door assembly for select front-load washers. It restores a clear viewing window and proper latching so the machine can close and seal correctly after damage to the original door. What it does

• Replaces the entire outer door on compatible front-load washers
• Provides a rigid structure and window for safe operation and visibility
• Enables proper alignment with the door lock/strike for reliable closing
• Helps address leaks or operation issues caused by a cracked, warped, or broken door

• 1 complete door assembly

• Disconnect power before servicing; wait for moving parts to stop
• Support the door during removal/installation to protect the hinge area
• Handle glass carefully and protect the cabinet finish from scratches
• After installation, check door alignment and gasket contact for a proper seal

This genuine replacement door handle restores a secure grip and makes opening your refrigerator easy and reliable. It replaces a cracked, loose or broken handle to return normal door operation and appearance. What it does:

• Replaces a damaged or cracked handle so the door opens and closes properly
• Provides a firm, ergonomic grip to prevent slips and accidental drops
• Stops wobbling or loose movement caused by worn or broken handle mounting points
• Restores the refrigerator's finished appearance when the original handle is scratched or chipped

• One replacement refrigerator door handle

• Basic hand tools required; most installs use screws or hidden fasteners—keep removed hardware for re-use if undamaged
• Support the door while removing or installing the handle to avoid stress on hinges or seals
• Do not overtighten fasteners; snug is sufficient to prevent cracking the handle
• Disconnect power only if required by your model's service instructions.

This is a replacement screw used to secure appliance components and panels. It restores proper fastening where a stripped, missing, or damaged screw causes loose parts or rattling. What it does:

• Fastens panels, trim, or internal components to maintain structural fit
• Helps stop vibration-related noise from loose assemblies
• Replaces missing or corroded screws that prevent proper closures
• Restores secure mounting after repairs or disassembly

• Use the correct screwdriver or bit to avoid stripping the head
• Tighten until snug—do not over-torque to prevent thread damage
• Keep small parts away from children and pets
• Disconnect power or water before accessing internal parts

This controller sub-assembly is an electronic control module that works with the appliance's main control to manage specific functions and signals. Replacing a faulty sub-assembly restores proper control communication and operation. What it does:

• Routes and processes control signals between main board components
• Helps coordinate cycles and subsystem functions controlled by the main PCB
• Common symptom: appliance or affected functions become unresponsive
• Common symptom: control errors, intermittent operation, or failure to start

• Always disconnect power to the appliance before servicing
• Handle the assembly carefully and avoid electrostatic discharge; ground yourself before touching electronics
• Reconnect all wiring and connectors securely; confirm harness routing matches original

This parts assembly is a factory-style replacement subassembly that restores the original mechanical/electrical components it contains, helping return the appliance to proper working condition. Use when an original subassembly is broken, worn, or missing. What it does:

• Replaces a damaged or worn factory subassembly so the appliance can operate as designed
• Restores internal connections, mounts, or mechanisms that fail when the original assembly is compromised
• Helps stop symptoms like intermittent operation, visible damage, loose components, or unusual noises associated with a failing subassembly
• Preserves OEM fit and alignment compared with loose or improvised repairs

• One replacement parts assembly

• Disconnect power and any water supply before beginning work
• Handle internal connectors and wiring carefully; avoid forcing or bending tabs
• Follow the OEM service manual or exploded parts diagram for correct orientation and mounting