Lmv2031 Parts

This customized nut is a small fastener used to secure components inside an appliance. Replacing a stripped, rusted, or missing nut restores a tight hold, reduces vibration, and helps keep panels and brackets properly aligned.

• Threads onto a matching screw or bolt to clamp parts together
• Maintains alignment of panels, brackets, and internal assemblies
• Helps prevent vibration, looseness, and rattling during operation
• Common failure signs: missing hardware, stripped threads, or components that won't stay tight

• Disconnect power; turn off water or gas before servicing
• Match the thread size/pitch to the original fastener before installation
• Hand-start threads to avoid cross-threading; tighten until snug—do not overtighten
• Replace any worn companion hardware (screw/bolt/washer) as needed

This thermostat is a temperature-sensitive safety switch for select LG microwaves. It monitors heat at its mounting point and interrupts power when overheating is detected, helping protect internal components and restore operation once temperatures return to normal.

• Monitors temperature at its mounting location inside the microwave
• Opens the circuit to interrupt power when temperatures exceed its rating
• Helps prevent heat-related damage to internal components
• Failure symptoms include mid-cycle shutoff, no heat or no start after an overheat event, or abnormal vent/cooling fan operation

• Disconnect power at the outlet or breaker before servicing
• Microwaves contain a high-voltage capacitor; discharge it properly before touching internal parts
• Note wire positions and transfer one lead at a time; mount the thermostat firmly for accurate heat sensing
• Inspect and replace any burnt connectors; ensure clean contact with the mounting surface

This replacement screw secures specified panels or components inside your appliance. Refreshing worn or missing hardware helps restore a tight fit, reduce rattling, and keep assemblies properly aligned for reliable performance.

• Provides secure fastening for brackets, panels, or internal assemblies
• Replaces stripped, rusted, or lost hardware
• Helps reduce vibration and rattling noises
• Symptoms include loose panels, shifting components, or a screw that won't tighten

• Disconnect power and allow any hot surfaces to cool before servicing
• Wear cut-resistant gloves and eye protection
• Match length and thread to the original; replace like-for-like
• Start threads by hand to avoid cross-threading; do not overtighten

This replacement door glass restores a clear viewing window and the protective barrier on your microwave door. Replace it when the original panel is cracked, shattered, or heavily scratched to keep the door secure and safe to use.

• Provides the see-through window and protective barrier within the microwave door
• Helps maintain proper door rigidity and alignment when intact
• Replace if the glass is cracked, chipped, shattered, loose, or badly scratched
• Reduced visibility, rattling, or visible damage are common symptoms of failure

• Unplug the microwave before servicing; microwaves can retain high voltage—use caution and do not open the cabinet
• Support the door; removal from the hinges may be required per your model's diagram
• Handle glass with cut-resistant gloves; edges can be sharp
• Transfer any reusable trim/clips as directed and verify the door latches and closes properly after installation

This ventilation fan motor drives the appliance's vent/cooling fan to move air through the cabinet. Replacing a failed motor restores proper airflow to prevent overheating, reduce odors, and return normal vent performance.

• Spins the ventilation fan to exhaust or circulate air as designed
• Helps protect controls and internal components by moving heat away
• Common symptoms: fan won't run, runs slowly, or makes loud humming/squealing/rattling noises
• May cause hot control areas, weak venting, or thermal shutdowns if failing

• Disconnect power at the breaker and allow the unit to cool before servicing
• Remove the necessary rear/top/cover panels to access the motor per your model
• Label and photograph wire connections; note shaft and rotation orientation
• Transfer the existing fan blade and mounting hardware; verify free spin before restoring power and testing

Replacement refrigerator shelf that restores usable storage space and support for food and containers. Helps keep items organized, prevents spills, and returns a stable surface after a cracked, chipped, or missing shelf. What it does:

• Provides a flat, supportive surface for storing food, containers and small appliances
• Replaces cracked, chipped or missing shelving to restore usable interior space
• Helps reduce spills and keeps items from shifting when the door is opened or closed
• Seats into the refrigerator's existing shelf supports to re-establish stable storage

• Remove the old shelf per your owner's manual by lifting or sliding it out of the shelf supports
• Handle carefully; wear cut-resistant gloves if replacing a cracked or broken glass shelf
• Place the replacement shelf into the same supports—do not force or bend the shelf

This Nut Assembly is a threaded fastener used to securely hold an associated component inside the microwave. Replacing a worn, stripped, or missing nut helps reduce vibration, eliminates rattling, and keeps parts properly aligned during operation.

• Provides a secure threaded anchor point for the matching screw/bolt
• Helps maintain alignment and prevent vibration or rattling
• Replaces stripped, cracked, or missing hardware
• Addresses symptoms like loose or shifting components and recurring rattling noises

• Disconnect power; if built-in, switch off the circuit breaker
• Access the mounting location, remove damaged hardware, and install the new nut assembly
• Avoid overtightening to prevent damage to threads or surrounding material

A high-voltage capacitor for the appliance's high-voltage circuit that stores and releases electrical energy to support proper heating operation. Replacing a failing capacitor can restore consistent heating and prevent related electrical faults. What it does:

• Stores and delivers high-voltage energy used by the magnetron/ high-voltage assembly to generate heat.
• Failure may cause no-heat or weak-heat conditions in the oven.
• Faulty capacitors can contribute to arcing, loud humming, or blown high-voltage fuses.
• Works as part of the HV circuit; not a user-serviceable low-voltage control.

• High-voltage components can hold a dangerous charge—disconnect power and discharge the capacitor before servicing.
• Use insulated tools and avoid touching terminals; verify proper operation with appropriate test equipment.

The TEMPLATE is an OEM part for LG microwaves. It is the outer casing and control panel covering that defines the microwave's design and aesthetics.  

The causes of a bad template can include cracks, dents, or damage to the outer surface from impacts or normal wear over time. Heat and humidity fluctuations can also cause template materials to degrade.

Symptoms of a bad template include:

• Cracks or breaks in the template material
• Loose, misaligned, or damaged control panel or display  
• Yellowing, warping, or discoloration of plastics
• Openings or gaps that compromise the microwave structure

This genuine OEM LG replacement part restores the microwave's appearance and protects internal components. It is also compatible with some Kenmore and Sears microwaves
 

This halogen lamp provides interior illumination for compatible LG appliances, restoring bright, focused light so you can see food and controls clearly. Designed as a direct replacement for the oven/microwave interior light. What it does:

• Replaces a burned-out or dim interior halogen bulb
• Restores clear task lighting inside the appliance cavity for safe viewing
• Helps eliminate flickering, intermittent, or no-light symptoms
• Fits into the existing lamp socket without modifying the appliance

• Disconnect power to the appliance before replacing the lamp to avoid shock
• Allow the old bulb and appliance interior to cool completely before touching
• Use a cloth or gloves when handling the new lamp; oils from skin can shorten bulb life

The Transformer is an OEM part for LG microwaves. It is responsible for stepping down high voltage current from the wall outlet to safe low voltage used by the microwave's electronic control system. Located inside the microwave cabinet beneath the turntable mechanism, the transformer supplies precise power to crucial components including the magnetron, control console, and touch controls.

Causes of a transformer failing include stresses from constant heating and electromagnetic flux over many years, damage from water damage, or manufacturing defects.  

Symptoms of a bad transformer include:

• Microwave failing to heat or function 
• Faulty or unresponsive control panel and display
• Buzzing or humming noises emanating from inside

This genuine LG replacement ensures all electronic systems receive stabilized power safely. Compatible with Sears/Kenmore branded microwaves using LG components.

This supporter motor is the mounting support assembly that holds and stabilizes the appliance motor, helping maintain proper alignment and reduce vibration for reliable operation. It restores secure motor positioning after wear or damage. What it does

• Supports and secures the motor housing to prevent movement during operation
• Reduces excessive vibration and noise caused by a loose or worn motor mount
• Helps keep the motor aligned so the drivetrain and drum/tumbler run smoothly
• Used when visual damage or cracking is present on the motor support

• Disconnect power (and gas if applicable) before beginning any repair
• Access may require removing the appliance rear or front panel and supporting the motor/drum while swapping the part
• Verify mounting orientation and fastener locations match removed part; retain any grommets or isolators if present
• If wiring is attached, note connector positions before disconnecting.

This is a truss-head tapping screw used to secure trim, panels, and small assemblies on compatible LG appliances. It provides a low-profile, wide-bearing head that helps hold parts flush and resist pull-through. What it does:

• Fastens plastic and sheet-metal components where a self-tapping thread is needed
• Truss head spreads load to prevent damage to soft or thin materials
• Helps secure control panels, brackets, or trim pieces that require a low-profile head
• Common replacement when original mounting screws are missing, stripped, or corroded

• One truss-head tapping screw

• Use the correct screwdriver bit and moderate torque to avoid stripping the screw or workpiece
• Start threading straight and let the screw form threads without forcing at an angle
• Disconnect power and follow appliance-specific service safety procedures before working internally
• Replace any damaged mating threads or clips for a secure fit

The Controller Assembly, Sub is an OEM replacement part for LG microwaves. It works behind the scenes to precisely coordinate all cooking operations through integrated circuits and firmware. Located internally, the sub controller receives instructions from the main control panel and regulates power levels, time settings and safety features.

Symptoms of a bad sub controller assembly include:

• Erratic or inaccurate power levels during cooking  
• Faulty or unresponsive display readings
• Inability to set or change time functions
• Intermittent or premature shut offs 

Causes of failure can stem from damage due to power surges over the lifespan. Repeated heating cycles also take a toll on electronic pathways. 

This OEM LG part is compatible with select Kenmore microwaves as well.

This lamp cover is the clear interior lens that protects and diffuses the appliance light, restoring even illumination and shielding the bulb from spills and debris. It's a direct-fit replacement designed to match the original lens shape. What it does:

• Protects the interior light bulb from food, grease, and impact
• Diffuses and directs light for even interior illumination
• Replaces cracked, discolored, or missing lamp lenses
• Helps prevent direct contact with the bulb for safer operation

• One lamp cover (lens) as shown

• Disconnect power before servicing to avoid electrical shock
• Handle the lens carefully—it may be glass or brittle plastic and can break if dropped
• Remove mounting screws or clips that secure the old lens, lift out, and install the replacement in the same orientation
• Test the light after reassembly; do not operate if mounting is damaged or the lens is not secured