Lmv2031 Parts

The Interlock Door Switch is an OEM part for LG microwaves. It is a safety component located on the door of the microwave designed to prevent the microwave from operating unless the door is securely closed. The interlock door switch works with the microwave's electronic control board to sense when the door is open or closed and allow or disallow operation accordingly.

Causes of a bad interlock door switch can include normal wear and tear from repeated opening and closing of the microwave door over time.

Symptoms of a bad interlock door switch include:

• The microwave runs or heats with the door open
• Error codes or diagnostic messages related to door sensors on the control board
• The microwave fails to operate even when the door is securely closed

This OEM LG part is also compatible with some Sears/Kenmore microwaves.

This is the turntable assembly for the microwave's rotating tray system. It provides a stable, smooth-rotating surface so dishes stay level and heat evenly, replacing a damaged, wobbly, or missing turntable to restore consistent cooking performance. What it does:

• Forms the rotating surface that supports dishes for uniform heating
• Keeps the tray centered and aligned with the drive hub/guide for smooth motion
• Replace if the tray is cracked, chipped, or missing
• Replace if the tray rocks, binds, or skips while turning
• Helps address uneven heating caused by poor or inconsistent rotation

• 1 turntable assembly

• Unplug the microwave or switch off power at the breaker before servicing
• Remove the existing turntable parts and clean the track/hub area
• Set the new assembly so it sits flat and engages the drive hub; verify smooth, unobstructed rotation
• Do not operate the microwave without the turntable properly installed

Replacement door handle that restores a secure, comfortable grip and original appearance to your refrigerator door. Matches the factory fit and finish for a straightforward swap without replacing the full door. What it does:

• Provides a sturdy, ergonomic grip for opening and closing the refrigerator door
• Replaces cracked, loose, broken, or cosmetically damaged handles
• Restores the original look and helps maintain normal door operation
• Intended to use with the refrigerator's factory mounting locations and fasteners

• Use basic hand tools; remove any trim or access panels to reach the handle fasteners
• Support the door while removing/installing the handle to avoid damage or misalignment
• Retain and reuse original screws/fasteners unless new hardware is explicitly supplied
• Refer to your model's service manual for step-by-step instructions and follow all safety precautions

This is a motor start/run capacitor that helps the appliance's motor start and run smoothly by supplying a brief boost of electrical energy. Replacing a failing capacitor restores reliable motor startup and operation. What it does:

• Provides the brief electrical surge needed to start and keep the motor running
• Commonly linked to motors that hum, fail to start, or run intermittently
• Helps prevent overheating from repeated start attempts when functioning properly
• Works with the appliance's start circuitry to ensure consistent performance

• Disconnect power to the appliance before accessing electrical components
• Discharge the capacitor and use insulated tools
• Observe polarity/terminal layout and secure connections to factory specifications
• Dispose of the old capacitor according to local electronic-waste regulations

A Tap-Tite binding-head screw used to fasten appliance panels and components where a self-tapping metal thread is required. Replaces missing or damaged fasteners to restore secure assembly and reduce vibration or rattling. What it does:

• Creates its own mating thread in thin sheet metal for a secure hold without a nut.
• Holds panels, brackets, and trim in place to prevent looseness or movement.
• Commonly used where stripped, missing, or broken screws cause rattling, misalignment, or parts that won't stay attached.
• Compatible with standard screwdrivers or nut drivers sized to the binding-head.

• Disconnect power and unplug the appliance before working on it.
• Use the correct driver bit to avoid cam-out or head damage.
• Start straight and apply steady pressure; avoid overtightening to prevent stripping the formed threads.
• If the original hole is badly damaged, assess for repair or use of a larger fastener as needed.

Size: 5 inches x 7 3/4 inches.

This fan assembly replaces the oven/range cooling blower to restore proper airflow and help prevent overheating of control electronics. It's a direct-fit assembly designed to replace a failed or noisy blower unit. What it does:

• Circulates air to cool control components and maintain safe operating temperatures
• Replaces worn or failed blower motor that won't start or runs intermittently
• Restores airflow when the appliance is running hot or control board overheats
• Reduces rattling or grinding noise caused by a damaged fan or housing

• Turn off power to the appliance at the breaker before starting any repairs
• Inspect mounting points and wiring harness for damage; replace connectors if frayed
• Follow OEM service manual for removal and reinstallation torque and routing

This replacement holder/locker secures the door latch assembly so the door stays aligned and closes reliably, allowing the appliance's safety interlocks to engage and the unit to operate as intended. What it does:

• Supports and holds the door latch/latch assembly in the correct position
• Helps keep the door aligned and firmly closed so safety switches can engage
• Can resolve symptoms like a door that won't stay closed, door rattling, or the appliance failing to start due to an incomplete door closure
• Matches OEM service-panel location and function for straightforward swap-out

• Disconnect power (unplug or shut off breaker) before beginning any work
• Access may require removing the outer cabinet or control panel per the appliance service instructions
• Handle door and latch components carefully to avoid misalignment or damage

This door frame assembly replaces a damaged or warped outer door frame to restore proper fit and finish. It re-establishes a stable support for the door and helps the appliance close and seal correctly. What it does

• Provides the structural outer frame that supports the door and inner components.
• Restores correct door alignment and reduces gaps that can cause rattling or poor closure.
• Helps prevent debris and moisture from entering the door cavity.
• Useful when the existing frame is cracked, bent, or cosmetically damaged.

• Disconnect power (and water, if applicable) before beginning any repair.
• Handle any glass or trim pieces carefully to avoid breakage or injury.
• Replacement typically requires removing the door from its hinges and detaching exterior trim; keep fasteners organized.

This is a complete outer door assembly that restores the refrigerator's front appearance and allows the door to open and close securely. It replaces a damaged or dented outer door to refresh function and cosmetic finish. What it does:

• Replaces a bent, dented, or cosmetically damaged outer door to restore appearance
• Provides the structural mounting surface for the handle, trim, and hinge hardware
• Ensures the door closes properly so internal temperature control can function as designed
• Helps prevent drafts and moisture intrusion at the cabinet opening when aligned correctly

• Disconnect power to the appliance before starting any work
• This heavy panel may require two people to safely handle and align
• Remove and retain original fasteners/hinges unless new hardware is explicitly included
• Adjust hinge screws as needed

A direct-replacement power cord assembly that restores a secure electrical connection to the appliance. Replaces a damaged or worn cord to help regain reliable power and reduce risk of arcing or intermittent operation. What it does:

• Provides the appliance's main AC power connection to the household outlet.
• Replaces frayed, cracked, or burned cords that can cause intermittent power or complete loss of power.
• Helps eliminate loose-terminal or plug issues that can cause sparking or a burning smell.
• Ensures proper fit and routing when the correct cord and terminals are used for the appliance.

• One power cord assembly.

• Always disconnect power at the breaker or unplug the appliance before starting work.
• Route the cord away from moving parts and heat sources; secure strain relief or clamp per the appliance cabinet.