Lrfvs3006d Parts

This drum roller replaces a worn support wheel that helps the dryer drum spin smoothly, reducing noise and preventing drum wobble. Restores quieter operation and proper drum alignment. What it does:

• Supports the dryer drum so it rotates evenly during a cycle
• Reduces squealing, scraping, or grinding noises from the drum area
• Helps stop drum wobble and uneven spinning that can cause wear
• Can reduce rubbing or burning smells caused by a seized or worn roller

• Disconnect power before starting any repairs; electric shock hazard.
• Typically accessed by removing the dryer front panel and drum—use care to support the drum.
• Inspect adjoining idler, belt, and rear rollers when replacing for complete repair.

This drawer guide is the sliding rail that helps a refrigerator/freezer drawer open and close smoothly and stay aligned. It restores stable drawer movement and prevents sticking, sagging, or drawers coming off the track. What it does:

• Guides and supports the drawer as it slides in and out
• Keeps the drawer aligned to prevent binding or uneven movement
• Reduces drawer sag and helps prevent accidental removal
• Restores smooth operation when original guide is cracked, worn, or broken

• One drawer guide

• Disconnect power to the appliance before starting any repair
• Remove the drawer per the appliance service instructions to access the guide
• Replace the guide using the OEM fasteners or clips; keep original mounting hardware unless damaged

This fan guide directs airflow inside the appliance to improve cooling efficiency and protect the fan assembly. It replaces a worn or broken guide so the fan blades run without rubbing and airflow stays properly channeled. What it does:

• Channels air from the fan to the correct internal passageways for consistent cooling
• Keeps fan blades centered and prevents contact with surrounding components
• Helps reduce vibration and noise caused by a damaged or loose guide
• Common symptom: noisy fan, blade rubbing, or uneven cooling in the compartment

• One replacement fan guide

• Disconnect power before servicing to avoid shock or injury
• Remove access panels and the fan assembly to reach the guide
• Inspect adjacent fan blades and mounts for damage; replace any worn parts
• Reassemble panels and test operation before returning appliance to service

This sheath heater is the internal heating element that produces and transfers heat for drying cycles. It restores heating capability so the dryer can evaporate moisture and complete cycles efficiently. What it does

• Heats air inside the dryer drum so clothes can dry.
• Common symptom: dryer runs but produces little or no heat.
• Common symptom: loads take much longer than normal to dry.
• Works with the dryer's thermal sensors and thermostats to maintain temperature.

• One sheath heater

• Disconnect power to the appliance before beginning any repair.
• Allow the unit to cool and access the heater from the rear or lower panel per your model's service manual.
• Inspect wiring and terminal connections for damage; replace any burnt connectors.
• Follow OEM service manual steps and safety guidance.

This pipe holder is a small plastic clip that secures tubing and small pipes inside the appliance, helping keep lines organized and preventing rubbing or disconnection. It restores proper routing and reduces vibration-related noises. What it does:

• Holds and secures water, drain, or refrigerant tubing to prevent sagging and chafing
• Keeps lines routed away from moving parts to reduce wear and noise
• Helps maintain proper tube alignment to avoid strain on fittings
• Commonly replaced when the original clip is cracked, broken, or missing

• Disconnect power and water before working on the appliance
• Inspect surrounding tubing and fittings for damage when replacing the clip
• Typically installs as a push-fit or snap-on clip; use gentle pressure and avoid forcing
• Replace broken or brittle clips to prevent tubing damage or leaks

The Link is an OEM part for LG refrigerators. It serves as an integral connector between the refrigerator door and cabinet, facilitating smooth opening and closing of the door. With durable construction and precise engineering, the link is designed to withstand the rigorous motion of hundreds of door openings without compromising functionality. 

Symptoms of a bad link include:

• Doors that do not close or seal properly 
• Excessive noise or vibration from the door area
• Damage, bending, or breakage of the connecting pieces
• Misalignment impairing proper door operation

Causes can stem from normal wear and tear over many years of use. Replacing a faulty link restores the refrigerator door's designed motion for convenient access to the interior.

This OEM LG part fits seamlessly while extending the product's useful life. This part is also compatible with Kenmore models featuring LG's refrigerator link assembly design.

This cover assembly is the outer rear cabinet panel that protects and encloses a flat-panel TV's internal components, restoring the TV's appearance and safety after damage or during rebuilds. What it does

• Replaces a cracked, warped, or missing rear cabinet to protect circuit boards, power supply, and wiring
• Restores a secure mounting surface for internal components and connector access
• Helps prevent dust, debris, and accidental contact with live parts
• Improves the TV's cosmetic finish when the original housing is damaged

• One rear cover assembly

• Always unplug the TV and place it on a soft, flat surface before beginning work
• Handle the cover carefully to avoid damaging plastic tabs or screw bosses
• Installation typically requires removing rear screws and reconnecting any retained brackets or gaskets

The Gasket Assembly Door is an OEM part for LG refrigerators. This gasket forms a seal around the refrigerator door, preventing warm air from entering and cool air from escaping, thus maintaining optimal temperature inside the refrigerator.

Causes of a bad gasket assembly can include wear and tear over time, damage from frequent opening and closing of the door, or degradation from exposure to various elements. A compromised gasket can lead to inefficiency in the refrigerator's cooling performance.

Symptoms of a bad gasket assembly include:

• Warm air entering the refrigerator
• Increased energy consumption
• Frost buildup inside the refrigerator
• The door not sealing properly or being difficult to close

This OEM LG part is also compatible with Sears/Kenmore models.

The Door Gasket Assembly is an OEM replacement part for LG refrigerators. This part seals the door and maintains a thermal barrier. Proper compression provides energy efficiency.

Causes of a faulty gasket assembly may involve deterioration as adhesive softens from repeated compression. Mineral deposits accumulated over extended use could also harden material reducing flexibility.

Symptoms of a problematic gasket include:

• Cool air felt leaking from the door
• Moisture visible on seal interface areas
• Temperature fluctuations

This part is also compatible with some Kenmore refrigerator models.

The Water Valve Assembly is an OEM part for LG refrigerators. This assembly controls the supply of water to areas within the refrigerator including the icemaker and water dispenser.

Causes of failure can be mineral buildup over time restricting flow, or damage to solenoid valves and electronic components regulating water pressure and distribution.

Symptoms of a bad water valve assembly include:

• Dripping or flooding from the water line connections
• Inability to dispense water or make ice
• Water levels that fluctuate erratically

This OEM LG part is also compatible with some Kenmore models.

This does include the Ice maker.

The Ice Dispenser Assembly is an OEM part for LG refrigerators. It incorporates the components responsible for making and dispensing cubed ice. 

Causes of a bad dispenser can include worn gears or drive wheels that no longer advance ice consistently. Clogs or mineral buildup from hard water sediments over time also reduce effectiveness.

Symptoms of a dysfunctional dispenser assembly include:

• Ice cubes dispensing poorly or jamming within the chute
• Grinding or other unusual noises during dispensing
• Dispenser knob or lever functioning intermittently
• Inability to selectively dispense ice or water

This LG part is also compatible with some Kenmore models.

The Air Cleaner Filter Assembly is an OEM component for LG sidebar refrigerators. Containing a pre-filter and deodorizing carbon filter, this assembly removes dust, pollen, and odors from air circulated within the refrigerator interior.   

Causes of needing a replacement include wear from regular saturation of the carbon filter over time as it absorbs odors and extends the life of the appliance.

Symptoms requiring replacement are:

• Odors becoming noticeable inside the refrigerator   
• Accumulation of dust visible over shelves and drawers
• Poor air circulation with limited debris removal 

This OEM LG part is also compatible with some Kenmore models

The Fan Grille Assembly is an OEM part specifically designed for LG refrigerator fan components. It houses the small circulating fan that helps regulate airflow and temperatures within the fridge and freezer compartments.

Causes of failure include normal wear over time of plastic parts, mineral deposits clogging mesh surfaces, or cracks from appliance shipping/handling.

Symptoms of an inadequate fan grille include: 

• Fluctuating temperatures requiring frequent adjustment 
• Foggy freezer glass from warm air infiltration
• Faster ice buildup or frost accumulation
• Reduced shelf life of meats and other perishables

 This OEM part also fits select Sears/Kenmore models.

This water filter assembly replaces the refrigerator's water filtration module to help restore clear-tasting water and steady flow. Fits models that use the AGF80300705 assembly and installs at the refrigerator water inlet. What it does:

• Filters sediment and common taste/odor contaminants to improve drinking water quality
• Restores reduced water flow caused by a clogged or failing filter module
• Helps reduce visible particulates and cloudiness in dispensed water
• Prevents unfiltered water from reaching the dispenser/ice maker when installed

• Turn off refrigerator water supply before replacing the assembly to avoid leaks
• Hand-tighten connections; avoid overtightening fittings to prevent damage
• Run and discard the manufacturer-recommended initial volume of water after install to flush the system

This replacement door basket restores secure, organized storage on your refrigerator door. It holds bottles, jars, and condiments on the inner door to keep items upright and reduce spills when opening and closing.

• Mounts onto the door liner rails/slots to provide on-door storage
• Keeps contents upright during door movement to help prevent tipping
• Helps address issues such as a cracked or missing bin, a basket that won't stay seated, or items falling from a damaged bin

• Remove contents and lift the old basket straight up and out of the door liner channels
• Align the new basket with the mounting tabs/slots and press down until fully seated and secure
• Verify the door closes freely, then reload contents; avoid overloading the bin
• Handle rigid plastic carefully; allow cold parts to warm to room temperature to reduce risk of cracking