Lrfvs3006d Parts

This water filter assembly replaces the refrigerator's water filtration module to help restore clear-tasting water and steady flow. Fits models that use the AGF80300705 assembly and installs at the refrigerator water inlet. What it does:

• Filters sediment and common taste/odor contaminants to improve drinking water quality
• Restores reduced water flow caused by a clogged or failing filter module
• Helps reduce visible particulates and cloudiness in dispensed water
• Prevents unfiltered water from reaching the dispenser/ice maker when installed

• Turn off refrigerator water supply before replacing the assembly to avoid leaks
• Hand-tighten connections; avoid overtightening fittings to prevent damage
• Run and discard the manufacturer-recommended initial volume of water after install to flush the system

This replacement door basket restores secure, organized storage on your refrigerator door. It holds bottles, jars, and condiments on the inner door to keep items upright and reduce spills when opening and closing.

• Mounts onto the door liner rails/slots to provide on-door storage
• Keeps contents upright during door movement to help prevent tipping
• Helps address issues such as a cracked or missing bin, a basket that won't stay seated, or items falling from a damaged bin

• Remove contents and lift the old basket straight up and out of the door liner channels
• Align the new basket with the mounting tabs/slots and press down until fully seated and secure
• Verify the door closes freely, then reload contents; avoid overloading the bin
• Handle rigid plastic carefully; allow cold parts to warm to room temperature to reduce risk of cracking

The MOTOR ASSEMBLY is an OEM component specifically designed for LG refrigerators. It is an electric motor that controls air circulation throughout the fridge to maintain optimum cooling. Proper air circulation is crucial for keeping food fresh while removing moisture to prevent frost buildup.

Causes of a bad motor assembly can include wear and tear over time, damages from electrical issues like power surges, or potential mechanical failures within the motor itself.  

Symptoms of a bad motor assembly include:

• Inconsistent temperatures inside the fridge 
• Excessive frost or ice buildup
• Strange noises emanating from the appliance
• Inability to achieve proper cooling

Replace yours today with this genuine OEM LG part to ensure reliable operation and consistent cooling performance. This OEM LG part is also compatible with Sears/Kenmore.

This replacement gasket seals the Home Bar (door-in-door) access panel on your refrigerator. A fresh, flexible seal stops warm-air leaks that cause condensation, frost, and temperature fluctuations, helping the unit run efficiently and keep food cold.

• Forms an airtight seal around the Home Bar/door-in-door panel
• Helps maintain proper interior temperature and humidity
• Common symptoms: visible gaps, torn or warped gasket, condensation or frost near the panel, door not closing flush
• Restores reliable closing and reduces unwanted airflow

• Disconnect power before servicing
• Open the Home Bar panel, pull the old gasket from the channel, then align and press the new gasket fully into the groove—seat corners first
• Warm the gasket (hair dryer on low or soak in warm water) to relax folds; do not overheat
• Close and check for an even seal; adjust by massaging the gasket into place as needed

The Compressor is an OEM component specifically designed for LG refrigerators. Located inside the refrigerator compartment, the compressor pressurizes and circulates refrigerant through the cooling system. Through precisely timed operation, the compressor maintains optimal freshness.

Symptoms of a bad compressor include:  

• Elevated interior temperatures failing to efficiently chill
• Loud buzzing or vibrating noises coming from inside the walls  
• Frost buildup indicating ineffective cooling cycles
• Complete cooling system failure leaving foods unpreserved

Causes involve refrigerant leaks, blocked airflow to the compressor, or simply wear over tens of thousands of hours of use breaking down moving components.

This OEM LG part is also compatible with some refrigerator models from Kenmore and Sears. Replace to restore reliable, long-term temperature control keeping contents at peak freshness.

The Auger Motor is an OEM part for LG refrigerators. It is responsible for dispensing ice from the icemaker into the ice bucket. 

Symptoms of a bad auger motor include:

• Slow or incomplete ice filling of the ice bucket
• Ice clumping or jamming in the auger assembly 
• Grinding or rubbing noises coming from the icemaker region
• The icemaker not producing any ice at all

Causes of a bad auger motor can be wear and tear over time, freezing or ice buildup preventing proper operation, or failure of internal motor components. 

This OEM LG part is also compatible with select Sears/Kenmore models. 

This tray assembly replaces a damaged or worn refrigerator drawer tray to restore secure storage and smooth drawer operation. It provides a durable support surface for food storage and helps keep drawer contents organized and contained. What it does

• Supports and stabilizes the refrigerator drawer, preventing sagging or uneven movement
• Provides a flat, easy-to-clean surface that contains spills and helps protect interior components
• Restores proper drawer alignment and smooth sliding when original tray is cracked or broken
• Commonly replaced for visible cracks, warping, or when the drawer no longer sits or slides correctly

• High-level replacement: remove drawer, unclip or unscrew old tray, and install the new tray following OEM guidance
• Use basic hand tools; avoid forcing parts to prevent damage to surrounding components
• Disconnect power only if removal requires accessing electrical components; otherwise, work with the unit powered off for safety

Replacement door basket that restores convenient storage on the appliance door, keeping bottles and small items secure and accessible. Replaces damaged or missing door bins to help keep your appliance door organized and usable. What it does:

• Provides a secure shelf on the appliance door for bottles, condiments and small containers.
• Replaces cracked, chipped or broken door bins that no longer hold items safely.
• Restores lost or reduced door storage capacity for easier organization.
• Helps prevent items from falling out of the door during normal use.

• Disconnect power (unplug or switch off) and remove all items from the door before starting.
• Most installations are hand-operated: lift or tilt the old bin out of the door track, then seat the replacement into the same track—do not force.
• Inspect mounting clips or supports during replacement; damaged clips must be replaced separately.

This Tray Cover Assembly replaces a damaged or missing outer cover to protect and contain the tray area, restoring proper fit and helping prevent spills or debris buildup. It's a direct-fit replacement designed for easy swap-in. What it does:

• Covers and protects the tray area to keep contents contained and reduce spills
• Restores proper alignment and sealing of the tray opening
• Replaces cracked, warped, or broken covers that cause leaks or poor fit
• Helps maintain appliance appearance and hygiene by covering exposed tray parts

• One tray cover assembly as shown

• Disconnect power (and water if applicable) before beginning any repair
• Handle part carefully to avoid scratching or cracking plastic
• Align tabs and snap or fasten in place; verify clips engage fully
• Test fit and basic operation before reassembling remaining panels

This fresh room tray assembly replaces the removable shelf/tray that supports stored produce and deli items, helping contain spills and keep the fresh room organized for consistent cooling. Designed to restore proper fit and function. What it does:

• Replaces a cracked, warped or missing fresh room tray that can no longer hold items securely
• Helps contain spills and drips to protect the compartment below
• Restores a level surface for drawers and produce storage to improve usability
• Fits into the fresh room area and engages existing rails or supports

• One tray assembly as shown

• Remove power to the appliance before performing service for safety
• Typically slides into place on existing rails; inspect rails and fasteners for wear before installing
• Handle plastic parts gently to avoid cracking during installation
• Only use replacement parts specified for your refrigerator model

This customized screw secures internal or external appliance components to restore proper fit and reduce movement. Use it to replace missing or damaged fasteners so panels and assemblies stay firmly attached during normal operation. What it does:

• Fastens panels, brackets, or small assemblies to maintain structural stability
• Prevents rattling, vibration noise, or loose trim caused by missing screws
• Restores correct alignment where a stripped or damaged screw allowed movement
• Works as a direct replacement for the matching screw specified for the repair

• One screw

• Disconnect power and water supply before starting any repair
• Use the correct screwdriver or bit to avoid stripping the head
• Tighten securely but do not overtighten to prevent thread damage
• Keep small parts away from children and retain any removed hardware for reuse if needed

Color: Dark Stainless

This tray assembly is the replacement drawer pan that holds and supports items inside the appliance drawer, restoring proper storage and stable sliding operation. It replaces damaged, cracked, or warped trays to keep contents contained and organized. What it does

• Replaces a cracked, broken, or warped drawer tray that leaks or fails to support contents
• Restores proper alignment and smooth sliding of the drawer when tray damage causes sticking
• Helps contain spills and prevents food or items from contacting internal components
• Reduces noise from a loose or broken tray while the drawer is opened and closed

• One tray assembly

• Basic hand tools may be required; follow the appliance service manual for step-by-step removal and installation
• Disconnect power (and water, if applicable) and remove contents before servicing
• Inspect surrounding rails and fasteners and replace any damaged clips or guides for best fit

This vegetable tray assembly replaces a damaged or missing crisper drawer insert to keep fresh produce organized and contained in the refrigerator. Durable molded plastic fits into the crisper compartment for everyday use. What it does:

• Holds and contains fruits and vegetables so they stay organized and don't spill onto shelves
• Provides a removable surface for easy cleaning and produce access
• Restores proper drawer fit when the original tray is cracked, warped, or missing
• Helps maintain airflow around stored produce when installed correctly

• Disconnect power or unplug the refrigerator before inspecting or removing interior parts when possible.
• Slide out existing drawer and lift or unclip per the refrigerator's service instructions to remove old tray.
• Align new tray with drawer guides or rails and slide in until it seats fully; avoid forcing.
• Handle edges carefully to avoid damage; clean with mild detergent and water — do not use abrasive cleaners.

This lever return spring restores proper tension to the lever assembly so the control or latch returns smoothly. A direct-fit replacement designed to restore normal lever movement and function. What it does:

• Provides return tension for the lever to ensure reliable latch or control movement
• Helps stop the lever from sticking or remaining engaged after use
• Restores smooth, consistent operation when the original spring is worn or broken
• Commonly replaced when lever movement feels loose or fails to return

• One spring lever

• Disconnect power (or unplug) and follow appliance safety procedures before servicing
• Access may require removing panels or the control/door assembly; keep fasteners organized
• Inspect mating lever and pins for wear; replace damaged components to prevent repeat failure