Lrfxc2406s/01 Parts

Note: Left Rail Cap

This lower hinge assembly secures and supports the refrigerator door pivot, restoring proper door alignment and smooth opening/closing. Replace a worn or damaged lower hinge to stop sagging, help seal performance, and reduce rubbing or binding. What it does:

• Provides a stable pivot point for the lower side of the refrigerator door.
• Corrects door sagging or misalignment that can cause poor sealing or uneven gaps.
• Reduces rubbing, scraping, or binding when opening and closing the door.
• Restores proper door operation after impact damage or worn hinge components.

• One lower hinge assembly

• Disconnect power and remove food from the door area before starting; support the door to prevent dropping during removal.
• Keep all original fasteners if they are undamaged; some models may reuse screws or pins.
• Use appropriate tools and take care not to damage the door finish or gasket; wear gloves to protect hands.

This refrigerator door basket assembly replaces a cracked or missing door bin to restore secure storage for bottles, jars, and condiments. It mounts to the door liner to keep items organized and easy to reach. What it does:

• Attaches to the door liner to provide shelf-style storage
• Restores lost capacity and organization when a bin is broken or missing
• Helps keep beverages and condiments stable during door movement
• Common symptoms: cracked plastic, broken locking tabs, bin won't stay seated, items falling, door interference

• 1 door basket assembly

• Unplug the refrigerator and remove items from the affected bin area
• Lift the old bin straight up to disengage the tabs, then pull it out
• Align the new bin with the door liner mounts and press down until fully seated
• Verify the door closes freely and avoid overloading the new bin

The Shelf Assembly is an OEM replacement part for LG refrigerators. It provides a movable shelf surface for organizing and storing items in the refrigerator or freezer compartment. 

Symptoms of a bad shelf assembly include:

• Sagging or bowing of the shelf surface 
• Difficulty in moving or removing the shelf
• Damage or cracks in the frame or wire grid
•  Inability to bear weight as intended

Causes of failure can be repeated overloading, accidental impacts, or normal wear and tear over time. 

This authentic LG shelf assembly is also compatible with refrigerators by Kenmore models.

Replacement DC motor assembly that powers the appliance's drum/rotational system to restore tumbling or spinning. Fits as the drivetrain motor used when the original motor is worn, noisy, or no longer turning. What it does:

• Drives the drum or spin mechanism so the appliance can tumble or spin clothes as intended.
• Restores normal rotation when a failing motor causes no-tumble, no-spin, intermittent stopping, or humming without movement.
• Can correct grinding, squealing, or burning-odor symptoms when traced to a failed drive motor.
• Works with the existing mounting hardware and electrical connector on compatible models.

• Disconnect power (unplug or switch off breaker) before removing or installing the motor.
• Handle electrical connectors and wiring carefully; note connector positions and routing before disassembly.
• Inspect belt, pulleys, and mounting points while the motor is accessible and replace damaged components as needed.

This drawer guide is the plastic slide that supports and guides a freezer or refrigerator drawer for smooth, stable opening and closing. It replaces a worn or broken guide to reduce sticking, sagging, and drawer misalignment. What it does:

• Supports the drawer on its track so the drawer opens and closes smoothly
• Keeps the drawer aligned to prevent binding, scraping, or uneven movement
• Restores proper engagement with the drawer slide to stop sagging or partial drops
• Helps reduce noise and wear caused by a damaged or missing guide

• Disconnect power or unplug the appliance before accessing interior components
• Remove the drawer and any contents or glass shelves first to avoid breakage
• Typically secures with simple clips or a few screws; do not force parts—line up tabs before seating
• If metal parts are bent or the mating slide is damaged, inspect both sides and replace as needed

This replacement drawer tray assembly restores a refrigerator's lower storage drawer so food stays organized and supported. Durable molded tray snaps into the drawer housing to replace cracked, warped, or missing trays. What it does:

• Supports and contains fresh foods in the refrigerator drawer for organized storage
• Replaces damaged, cracked, or warped trays that can cause unstable items or food contact with drawer floor
• Helps maintain smooth drawer seating and alignment when the tray is properly installed
• Fits into the drawer housing and works with the existing slide/track components

• Remove contents and fully empty the drawer before replacing the tray
• Lift the drawer from its tracks, then snap the tray into the housing or replace and re-seat the drawer
• Use care to avoid sharp edges; wear gloves if needed and disconnect power if accessing electrical components nearby
• Only use manufacturer's replacement parts

This air filter assembly replaces the factory air cleaner in compatible refrigerators to help reduce odors and maintain fresher air inside the fresh food compartment. Designed as a direct-fit replacement when the original filter is worn or clogged. What it does:

• Captures and helps reduce common refrigerator odors for improved internal air quality
• Circulates cleaner-smelling air through the fresh food compartment when the appliance's air circulation runs
• Helps maintain a neutral-smelling environment around stored foods to reduce flavor transfer
• For use when original filter is damaged, heavily soiled, or no longer performing

• One air filter assembly

• Check your owner's manual for the exact filter location and any appliance-specific steps before starting
• Replace with the power off or follow manufacturer guidance for safe access to the filter area
• Dispose of the old filter according to local regulations; avoid forcing parts during removal or installation

This drip tray catches and channels water runoff inside the appliance to help prevent pooling and minor leaks. It's a direct-fit replacement listed by the manufacturer and sold as the single tray used in the unit. What it does

• Collects condensate or defrost water and directs it to the drain area to prevent pooling.
• Helps stop water from dripping onto lower drawers, shelves or the floor.
• Commonly replaces a cracked, warped or missing tray that causes visible leaks or water buildup.
• Fits into the appliance's lower compartment where the original tray sat.

• Unplug the appliance or disconnect power before servicing.
• Remove any obstructing drawers or shelves to access the tray location; handle glass shelves carefully.
• Lift out the old tray and set the new tray into the same position; no special tools typically required.

Note: Right Rail Cap 

A small protective cap that covers and protects a component connection or opening from dirt and moisture, helping maintain proper function and prolong component life. Simple replacement when the original cap is cracked, missing, or worn. What it does:

• Covers exposed fittings, terminals, or openings to keep out debris and moisture
• Helps prevent leaks or contamination at the sealed connection
• Restores a secure fit when the original cap is cracked, split, or degraded
• Commonly used where a small, removable protective seal is required

• Inspect mating surface and surrounding gasket/seal before installing; replace other damaged parts as needed
• Press the cap firmly into place until fully seated; no special tools usually required
• Wear gloves and disconnect power or water supply if working near energized or pressurized components