Lrg3193 Parts

The Burner Cap is an OEM part for LG ranges. It sits over the range burner and directs the flame for efficient cooking. Burner caps help spread heat across cookware while containing flames and sparks to the burner area.

Causes of a bad burner cap include wear and tear, cracks or breaks developing over time. If accidentally dropped or mishandled, excessive impact can damage the thin metal cap.

Symptoms of a bad burner cap include:

• Flames seen escaping outside the designated burner area
• Inefficient or uneven heating of cookware positioned over the cap
• Looseness, wobbling or inability to properly seat the cap securely on the burner
• Cracks, holes or other surface damage visible on the cap

This OEM LG part is also compatible with some Kenmore models.

This slider is a replacement glide piece that helps a drawer or sliding compartment move smoothly and stay aligned. Replacing a worn slider restores quiet, consistent travel and prevents wear on the surrounding trim. What it does:

• Guides and supports a drawer or sliding compartment for even movement
• Reduces sticking, scraping, and noisy operation from worn glides
• Keeps the drawer aligned to prevent rubbing or binding against the cabinet
• Helps extend life of associated rails and trim by restoring proper tracking

• One slider glide piece

• Disconnect power to the appliance and remove any contents before servicing
• Remove the drawer or access panel per your appliance instructions to reach the slider
• Inspect mating rail and fasteners; replace any damaged clips or screws for a secure fit

This replacement screw is a factory-style fastener used to secure components in place and restore proper fit and function. It's a direct-fit hardware piece sized and finished to match the original installation. What it does:

• Secures panels, brackets, or assemblies to prevent rattling or misalignment
• Restores original mounting strength where a stripped or missing screw causes loose parts
• Helps maintain proper panel gaps and component positioning for reliable operation
• Appropriate where the appliance requires the OEM-style screw head and thread form

• Screw

• Use the correct screwdriver or bit to avoid stripping the head
• Tighten until snug; avoid over-torquing which can strip threads or damage plastic parts
• Replace any damaged or corroded mating hardware for best results
• Disconnect power to the appliance and follow manufacturer safety instructions before servicing

This replacement burner cap fits over the burner head to protect the burner and help shape the flame for more even cooking. It restores correct flame pattern and keeps debris away from the burner ports. What it does

• Covers the burner head to direct flame and improve heat distribution for cookware.
• Helps prevent food and crumbs from entering burner ports that can cause uneven flame or ignition issues.
• Supports consistent ignition by keeping the burner surface aligned and unobstructed.
• May reduce yellow or irregular flames caused by misaligned or damaged caps.

• One burner cap

• Turn off the range and allow all components to cool completely before handling.
• Remove the old cap, clean the burner head and surrounding area, then seat the new cap in the correct position.
• No special tools are typically required; ensure the cap sits flat and centered on the burner head before use.

A convection fan assembly that circulates hot air inside the oven cavity to promote even baking and roasting. Replacing a worn or noisy fan helps restore consistent cooking performance and airflow in convection ovens. What it does:

• Circulates heated air for more even temperature distribution and improved browning.
• Restores proper airflow when the existing fan is noisy, loose, or failing to spin.
• Helps resolve uneven baking, hot spots, or longer cook times caused by poor air circulation.
• Works as the rotating airflow component of the oven's convection system.

• Disconnect power to the appliance before beginning any work to avoid shock risk.
• Access typically requires removing the oven interior panel or rear access panel; keep track of fasteners.
• Handle sharp sheet-metal edges and support the fan while disconnecting wiring or mounting hardware.

The Oven Control Panel Assembly is an OEM replacement part for LG electric ranges. It houses both the electronic control interface and physical mounting plate/supports. 

Symptoms of a faulty assembly can include:

• Unresponsive buttons or dials  
• LED/display failure preventing monitoring
• Improper locking of oven door during bake/clean cycles

Causes may stem from moisture exposure damaging circuits over time, impact/flexing resulting in broken circuit boards, or mounting failures allowing controls to disengage.

This authentic LG assembly is compatible with select Kenmore brand models. 

This heater cover mounts over the dishwasher's heating element at the bottom of the tub. It shields the element and helps direct wash water, protecting dishes and the tub floor from direct contact with the heater. What it does:

• Covers and protects the exposed heating element at the tub base
• Helps channel water flow around the element during the cycle
• Replace if the cover is cracked, warped/melted, or missing
• Can help prevent utensils or items from snagging near the heater area

• 1 heater cover

• Disconnect power and shut off the water supply before servicing
• Remove the lower rack and, if needed, the lower spray arm and filters to access the heater area
• Release retaining tabs or screws, remove the old cover, and seat the new cover evenly
• Ensure the cover locks securely and the spray arm spins freely before restoring service

This control board assembly directs power and communication to key components, interpreting inputs and sensor signals so the appliance runs the correct functions and cycles. Replaces a failed electronics module to restore reliable operation.

• Distributes power and control signals to major components per the unit's programmed logic
• Interfaces with sensors and the user controls to execute selected functions
• Coordinates cycle timing and safety monitoring
• Common signs of failure: no power or won't start, unresponsive controls/display, intermittent operation, error codes, or unexpected shutdowns

• Disconnect power to the appliance before servicing
• Handle the board by the edges; use ESD protection to avoid static damage
• Photograph and label connectors, then transfer them one at a time to the new board
• Secure wiring to avoid pinching; follow the unit's tech sheet or service manual

This replacement screw fastens panels and components in your appliance, keeping them secure and aligned. Replace stripped, rusted, or missing hardware to stop rattles and ensure assemblies stay tight through everyday use.

• Secures covers, brackets, and internal assemblies at the specified mounting points
• Helps correct looseness or misalignment after a fastener is lost or stripped
• Can reduce rattling or vibration noises caused by loose fasteners
• Restores proper fit of panels or trim pieces

• Disconnect power to the appliance and shut off water or gas before servicing
• Match length and thread to the original fastener before installation
• Start threads by hand to avoid cross-threading; tighten only until snug to prevent damage
• Reuse any washers, spacers, or threadlocker originally installed at this location

This burner assembly replaces a worn or damaged gas burner module to restore reliable ignition and consistent flame for proper operation. It helps get your appliance back to safe, even heating and cooking. What it does:

• Directs and distributes gas to the ignition source so the burner can produce a steady flame.
• Restores reliable ignition when a burner fails to light or flames are intermittent.
• Helps resolve uneven heating or poor cooking performance caused by damaged burner components.
• Works as the primary flame-producing module in the appliance's gas system.

• Turn off gas supply and electrical power before servicing; follow all local codes and OEM safety guidance.
• Replace only with the correct, matching part number.
• After installation, check for proper ignition, stable flame, and correct gas connections before regular use.

This gas valve assembly controls the flow of natural or LP gas to the oven/range burner, restoring safe ignition and burner operation. Replace a faulty valve to help resolve burners or oven not lighting or heating inconsistently. What it does:

• Regulates gas flow to the oven/burner burners so they ignite and maintain a steady flame
• Works with the oven/range ignition system and safety controls to open and close gas supply
• Commonly replaced when burners fail to light, flame is weak or intermittent, or oven won't heat
• Designed as a direct replacement assembly for the original valve configuration

• One gas valve assembly as shown

• Shut off both gas supply and electrical power before beginning any service
• After installation, check all fittings for leaks with a gas leak detector or soapy water and test operation
• Do not alter the valve or regulator; follow appliance manufacturer instructions

This genuine replacement power cord assembly restores electrical power to the appliance by replacing a damaged or worn main power cable. It provides a direct, factory-fit connection for safe, reliable operation. What it does

• Delivers mains power from the wall outlet to the appliance's internal wiring and control systems.
• Replaces frayed, cut, melted or otherwise damaged cords that can cause loss of power or intermittent operation.
• Helps eliminate burning smells, visible damage, or exposed wires that indicate a compromised power connection.
• Restores a secure plug and strain-relief connection to reduce stress on terminal connections.

• One power cord assembly.

• Always disconnect power at the breaker or unplug the appliance before starting any work.
• Verify correct cord routing and secure the strain relief/retainer to prevent pinching or chafing.
• Tighten terminal screws to the manufacturer's specification and ensure proper grounding.

The LP Conversion Kit is an OEM part for LG gas ranges. This kit contains all the necessary components to convert a natural gas range to operate on liquid propane (LP). This conversion is essential for users who do not have access to natural gas lines and prefer using liquid propane for cooking.

Causes of needing an LP Conversion Kit can vary, but the primary reason is the availability of the fuel source. Some homes and areas do not have natural gas lines, making liquid propane a viable and efficient alternative.  

Symptoms that indicate the need for a conversion kit include:

• The range is not performing as expected due to being connected to the wrong type of gas.
• Inability to reach desired temperatures or long heating times when using natural gas appliances in an LP setup.
• Observing that the flame color is not the normal blue, indicating incomplete combustion.

This OEM LG part is also compatible with some Kenmore models.

This parts assembly is a factory replacement assembly designed to restore the original components and fit where the OEM assembly is used. Replacing the damaged or worn assembly helps return the appliance to proper operation and fit. What it does

• Replaces the OEM parts assembly used in the appliance's internal component group.
• Restores proper mechanical/electrical connections where the original assembly has failed.
• Addresses symptoms such as intermittent operation, loose connections, or parts that no longer engage correctly.
• Provides an exact-fit factory-made assembly to simplify part replacement.

• Recommended for technicians or experienced DIYers; disconnect power and, if applicable, gas and water before starting.
• Inspect connectors, wiring, and mounting points for damage before installing the new assembly.
• Handle the assembly carefully to avoid bending tabs or damaging connectors.

The Burner Cap is an OEM part for LG ranges. It is designed to fit over the burner assembly, protecting the burner from dirt, debris, and accidental scratches or damage over time.

The range burner cap assists in ensuring safe and efficient operation of the burner. It directs heat upward toward cookware while preventing any material from falling into the burner itself.

Causes of a bad burner cap can include wear and tears such as cracks or breaks from normal use over extended periods of cooking. Spills, baked-on messes, or mishandling can also damage individual burner caps.

Symptoms of a bad burner cap include:

• Burner elements not heating properly or unevenly
• Food or liquid seeping down into the burner area
• Loose, damaged, or missing burner caps

This OEM LG part is also compatible with some Kenmore models.