Lrg7646eqo Parts

This insulator is the mica sheet that covers the microwave's waveguide opening. It shields the cavity from food splatter and moisture while allowing microwave energy to pass, helping prevent arcing and protecting internal components.

• Covers the waveguide port to keep grease and debris out
• Helps prevent sparking/arcing inside the cavity
• Restores safe, even microwave operation when the original is burned or stained
• Typical symptoms: visible burn marks or charring on the cover, arcing/sparking during use, unusual noises

• Unplug the appliance before service; high-voltage components can retain charge
• Remove the old cover by releasing mounting screw or tabs; clean residue from the area
• Do not bend or crack the new mica; install with the same orientation
• If trimming is required per service literature, follow the outline of the original cover only

This hardware washer helps distribute fastener load and maintain proper spacing in your LG appliance. Replacing a missing or worn washer restores secure mounting and alignment, reducing vibration and rattling from loose assemblies.

• Distributes the load of a screw or bolt and protects mating surfaces to maintain alignment
• Helps keep components secure and at the correct spacing
• A damaged or missing washer can lead to loosening, vibration, or rattling during operation
• Ensures correct hardware stack-up during reassembly after service

• Disconnect power and shut off water or gas before servicing
• Note the order and orientation of any washers/spacers; take a reference photo
• Use the correct driver or wrench and tighten snugly—do not overtighten
• Replace companion hardware if corroded, stripped, or damaged

Replaces a cracked, chipped, or worn cooktop surface on your gas range. Restores appearance and protects burner components. Installs over main frame.

This is the touchpad and control panel assembly that mounts on the front of the range and allows you to select cooking functions, set temperatures, and operate the oven. It includes the membrane touchpad and the decorative panel overlay. Replace this assembly if the touch controls are unresponsive, certain buttons no longer work, or the panel is cracked or peeling.

Fix burners or oven not lighting with this gas valve assembly. Controls gas flow to restore safe ignition and consistent heating in your range.

Fix weak flames or uneven heating with a new gas range burner orifice nozzle. Meters proper gas flow to burners. Common issue: mineral buildup clogs.

This is a packing gasket that seals the oven door to the range cabinet, preventing heat from escaping during cooking. It is made of a flexible, heat-resistant material that lines the perimeter of the oven door. Replace this gasket if you notice excessive heat escaping from around the door, uneven cooking temperatures, or if the gasket is visibly worn, torn, or hardened.

This is a circular wire harness holder that secures and organizes internal wiring within the range. It clips onto the frame or mounting points to keep wires routed properly and away from heat sources. Replace this part if it is broken or missing, which can cause loose wiring or potential contact with hot surfaces.

The Burner Assembly is an OEM component specifically designed for LG gas ranges equipped with sealed cooktop burners. This integral assembly contains the ignition electrode, valve stem, and cast burner head to conduct flame across grates.  

Symptoms of a bad burner assembly include:

• Inability to ignite or maintain consistent flames under cookware
• Yellow broken or excessive flame instead of steady blue  
• Clicking ignition sounds but no combustion takes place
• Deteriorated valve stems limiting gas flow regulation

Causes of failure involve clogged ports blocking gas dispersion, cracked burner bases no longer supplying sufficient air intake, or damaged ignition systems disabling piezo sparks over dozens of heating cycles.

Replace yours today with this genuine OEM LG assembly to restore optimal cooktop performance. Factory-sealed construction withstands daily use maintaining even heat across pans and preventing gas leaks. Compatible with GE, Frigidaire, and Kenmore sealed burner models as a direct unit replacement.

This is the control panel assembly that houses the buttons, display, and user interface for operating the range. It connects to the main control board and allows you to set temperatures, cooking modes, and timers. Replace this panel if buttons are unresponsive, the display is damaged, or the panel overlay is peeling or cracked.

The Vision Burner XL is a replacement gas range burner assembly designed to restore proper heat from the front-right/XL burner on compatible LG ranges. Replacing a damaged burner helps return even flame and reliable cooking performance. What it does:

• Replaces a worn, cracked, or damaged XL burner assembly to restore proper flame and heating
• Provides the correct burner port alignment for even heat distribution across pots and pans
• Commonly used when the burner won't light, has uneven flames, or produces a weak/irregular flame
• Matches OEM fit so the burner seats correctly and connects to the existing valve and igniter

• One Vision Burner XL assembly

• Disconnect power and shut off the gas supply before starting any work
• Handle with care to avoid bending ports or damaging the igniter/connector

This medium replacement burner restores proper surface heating on compatible ranges. It fits the cooktop's medium heating location and helps recover even heat distribution for everyday cooking. What it does:

• Replaces a damaged or worn medium cooktop burner to restore normal heating
• Helps eliminate weak or inconsistent heating at the medium element location
• Replaces burners with visible cracks, warping, or electrical faults that affect performance
• Works as a direct-fit service part when your cooktop diagram lists the medium (9500) burner

• One medium burner (9500) element

• Disconnect power to the appliance (unplug or shut off breaker) before installing
• Allow the cooktop to cool completely and handle ceramic/glass surfaces with care
• Follow the range's service manual or OEM diagram for correct fit and wiring

Seals around your range door to maintain stable interior temperatures and reduce energy loss. Replace when worn, cracked, or no longer sealing properly.

Seals your range oven door to prevent heat loss and maintain even cooking. Replace if worn, cracked, or causing temperature issues. Confirm fit with your model.

Replacement oven rack support bracket for your range. Installs inside the oven cavity to hold racks in place. Replace if cracked, broken, or missing.

Base plate for electric and gas ranges. Provides structural support at the bottom of the range. Replace if cracked, warped, or damaged from wear.