Lrmds3006s/02 Parts

This replacement drive gear restores mechanical motion in the appliance's drive assembly so parts rotate or advance smoothly. It's a direct-fit component used where a worn or broken gear prevents normal operation. What it does

• Transfers torque from the motor or drive shaft to the driven components
• Restores proper rotation and timing in the drive train
• Common symptom: loud grinding or clicking from the drive area
• Common symptom: parts failing to advance, rotate, or engage
• Common symptom: visible wear, missing or stripped teeth

• One replacement drive gear

• Disconnect power (and water, if applicable) before servicing
• Use appropriate hand tools and keep track of small fasteners and retaining clips
• Inspect mating shafts and bearings for wear; replace if damaged

This ferrite magnet is a replacement magnetic element used in compatible appliance assemblies to help secure components and maintain proper alignment. It restores magnetic retention and reduces shifting or misalignment during operation. What it does:

• Provides magnetic retention for panels, assemblies or components that rely on ferrite magnets
• Helps maintain proper alignment and secure closure where magnets are used
• Can reduce noise and vibration related to loose magnetic components
• Useful when a brittle, cracked or weak magnet no longer holds parts in place

• Disconnect power and follow the appliance manufacturer's safety instructions before servicing
• Handle the magnet carefully; ferrite material is brittle and can chip or shatter if dropped or struck
• Keep magnets away from sensitive electronics and credit cards; avoid pinching fingers between strong magnets
• If the original magnet is bonded or embedded, some adhesive or light trim may be needed for proper fit.

This LED light assembly illuminates the refrigerator interior when the door opens, delivering bright, efficient lighting so you can easily see items. Replace a failed module to restore proper visibility inside your fridge.

• Provides interior illumination for the fresh food or freezer compartment
• Turns on and off with the door switch
• Helps you quickly find items and check food condition
• Common symptoms: no light when doors open, flickering/strobing, dim or intermittent lighting

• Disconnect power to the refrigerator before servicing
• Remove any lens/cover, release retaining tabs, and unplug the wire harness to remove the old module
• Connect the new assembly, align tabs, and snap/secure it into place; reinstall the cover
• Restore power and verify operation; the door switch activates the light

The Water Valve Assembly is an OEM part for LG refrigerators. This assembly controls the supply of water to areas within the refrigerator including the icemaker and water dispenser.

Causes of failure can be mineral buildup over time restricting flow, or damage to solenoid valves and electronic components regulating water pressure and distribution.

Symptoms of a bad water valve assembly include:

• Dripping or flooding from the water line connections
• Inability to dispense water or make ice
• Water levels that fluctuate erratically

This OEM LG part is also compatible with some Kenmore models.

Restore a tight door seal and stop air leaks. This door gasket assembly forms the perimeter seal around the cabinet opening, helping maintain correct temperatures, reduce frost and condensation, and support efficient operation.

• Creates an airtight seal between the door and cabinet to keep conditioned air in
• Helps maintain stable internal temperatures and humidity
• Reduces frost/ice buildup and condensation around the door area
• Common symptoms of a failed gasket include tears, warping, gaps, doors not closing fully, moisture inside, or longer run times

• Disconnect power before servicing the appliance
• Let the new gasket warm and relax (room temperature or warm water); use low heat only if needed to smooth folds
• Start at the corners and press the gasket lip fully into the door's retainer channel, working evenly around
• Adjust door alignment if needed and allow time for the gasket to conform

This does include the Ice maker.

The Ice Dispenser Assembly is an OEM part for LG refrigerators. It incorporates the components responsible for making and dispensing cubed ice. 

Causes of a bad dispenser can include worn gears or drive wheels that no longer advance ice consistently. Clogs or mineral buildup from hard water sediments over time also reduce effectiveness.

Symptoms of a dysfunctional dispenser assembly include:

• Ice cubes dispensing poorly or jamming within the chute
• Grinding or other unusual noises during dispensing
• Dispenser knob or lever functioning intermittently
• Inability to selectively dispense ice or water

This LG part is also compatible with some Kenmore models.

The Air Cleaner Filter Assembly is an OEM component for LG sidebar refrigerators. Containing a pre-filter and deodorizing carbon filter, this assembly removes dust, pollen, and odors from air circulated within the refrigerator interior.   

Causes of needing a replacement include wear from regular saturation of the carbon filter over time as it absorbs odors and extends the life of the appliance.

Symptoms requiring replacement are:

• Odors becoming noticeable inside the refrigerator   
• Accumulation of dust visible over shelves and drawers
• Poor air circulation with limited debris removal 

This OEM LG part is also compatible with some Kenmore models

This replacement door basket restores secure, organized storage on your refrigerator door. It snaps into the inner door rails to hold condiments, bottles, and jars when the original bin is cracked, loose, or missing.

• Mounts on the refrigerator door liner to store bottles, jars, and condiments
• Replaces a cracked, warped, or missing bin; restores a snug, level fit
• Helps prevent items from tipping or falling during door use
• Common signs include broken side tabs, the bin falling off the door, or not seating correctly

• Empty the shelf and open the door fully to reduce strain
• Align the side tabs with the door liner rails at the correct height; lower until it seats
• Do not force; handle plastic edges carefully to avoid cracks
• Avoid overloading the new bin after installation

This Door Stopper is the hinge-mounted stop that limits your refrigerator door's swing. Replacing a worn or broken stopper restores smooth, controlled movement and helps protect hinges and nearby cabinetry from overextension. What it does:

• Controls the door opening angle on the hinge to prevent overextending
• Helps maintain door alignment for a reliable seal and smooth closing
• Reduces clunking or clicking at the hinge caused by a worn stop
• Replace if the door swings too far, binds, won't close smoothly, or the stopper is cracked/missing

• 1 door stopper

• Disconnect power and support the door to relieve hinge load before service
• Remove hinge cover/fasteners as needed and note the old stopper's orientation
• Install the new stopper on the hinge/bracket, reassemble, and check door travel
• Verify the door seals fully and opens within the normal range

Restore a tight, reliable seal on your refrigerator door with this Door Gasket Assembly. Replacing a worn or damaged gasket helps the unit hold temperature, reduce energy loss, and minimize condensation and frost around the door opening. What it does:

• Seals the door perimeter to keep cold air in and warm air out
• Helps maintain stable internal temperatures and efficiency
• Reduces moisture/condensation around the door area
• Limits frost or ice buildup caused by air leaks
• Common symptoms include tears, gaps, hardening, or a door not closing flush

• 1 door gasket assembly

• Unplug the refrigerator and clear door bins for easier access
• Let the new gasket relax flat; warm gently with a hair dryer or warm water to smooth kinks
• Press the gasket fully into the retainer/channel, starting at the corners and working evenly
• Close the door and check the seal all around; allow up to 24 hours for the gasket to conform

This water filter assembly replaces the refrigerator's water filtration module to help restore clear-tasting water and steady flow. Fits models that use the AGF80300705 assembly and installs at the refrigerator water inlet. What it does:

• Filters sediment and common taste/odor contaminants to improve drinking water quality
• Restores reduced water flow caused by a clogged or failing filter module
• Helps reduce visible particulates and cloudiness in dispensed water
• Prevents unfiltered water from reaching the dispenser/ice maker when installed

• Turn off refrigerator water supply before replacing the assembly to avoid leaks
• Hand-tighten connections; avoid overtightening fittings to prevent damage
• Run and discard the manufacturer-recommended initial volume of water after install to flush the system

This freezer door foam assembly replaces the insulating foam inside a freezer door to restore thermal seal and reduce frost build-up. It helps maintain proper temperature and improves cooling efficiency when the door insulation is damaged or compressed. What it does:

• Replaces compressed, torn, or missing door insulation to improve the door's thermal barrier
• Reduces frost accumulation and helps the freezer maintain set temperatures
• Restores proper door fit and reduces cycling caused by air leaks
• Fits behind the freezer door panel where the factory foam provides insulation

• Disconnect power to the appliance before starting any repair
• Access usually requires removing the freezer door inner panel and any retaining clips or adhesive
• Handle carefully—foam can be cut to fit but follow OEM placement for proper sealing

The Auger Motor is an OEM part for LG refrigerators. It is responsible for dispensing ice from the icemaker into the ice bucket. 

Symptoms of a bad auger motor include:

• Slow or incomplete ice filling of the ice bucket
• Ice clumping or jamming in the auger assembly 
• Grinding or rubbing noises coming from the icemaker region
• The icemaker not producing any ice at all

Causes of a bad auger motor can be wear and tear over time, freezing or ice buildup preventing proper operation, or failure of internal motor components. 

This OEM LG part is also compatible with select Sears/Kenmore models. 

This front plate assembly is the exterior trim piece that restores the appliance's front surface and protects internal components from dirt and damage. It improves appearance and helps maintain a proper seal and alignment. What it does:

• Replaces a cracked, dented, or missing front plate to restore the unit's exterior finish
• Shields controls and internal components from dust, spills, and everyday wear
• Helps maintain proper fit and alignment of adjacent panels and trim
• Returns the appliance to a finished, factory appearance

• Disconnect power to the appliance before beginning any repair.
• Installation typically requires removal of adjacent trim or the control bezel; keep all screws and fasteners for reinstallation.
• Handle the plate carefully to avoid scratching the finish during installation.

This upper hinge assembly secures and guides the appliance door at the top, restoring correct door alignment and smooth opening. Replace a worn or damaged hinge to stop door sagging and improve sealing and operation. What it does:

• Supports the top of the door and keeps it aligned on the cabinet
• Allows the door to pivot smoothly during opening and closing
• Prevents or corrects door sag, rubbing, or uneven gaps that can affect sealing
• Stops grinding, squeaking, or binding caused by a damaged hinge

• One upper hinge assembly

• Unplug the appliance or disconnect power before starting work
• Support the door while removing and installing the hinge to prevent dropping or injury
• Use basic hand tools; follow the appliance service manual for torque and alignment steps

This TV cover assembly replaces a damaged or cracked rear housing to restore the cabinet's fit and finish and protect internal components. It provides a factory-style enclosure that keeps internal boards and wiring secure. What it does:

• Replaces a broken, bent, or cracked rear TV housing to restore structural integrity
• Protects internal circuit boards, power supply, and wiring from dust and impact
• Helps maintain proper airflow pathways and component alignment
• Improves cosmetic appearance by covering scratches, dents, or missing sections

• Disconnect power and remove the stand or wall-mount before beginning service
• Follow OEM disassembly steps to access and remove the old cover; keep screws and brackets organized
• Handle the assembly carefully to avoid damaging mounting tabs and connector openings