Lsc23924st/02 Parts

This ice bucket assembly collects and stores ice produced by the refrigerator's ice maker, restoring a secure, easy-to-access bin for ice storage and retrieval. Ideal when the original bucket is cracked, warped, or worn. What it does

• Holds and stores ice produced by the ice maker so ice stays contained and accessible.
• Guides ice into the bin to prevent spills and keep the freezer organized.
• Helps reduce ice jams or blockage caused by a cracked or misshapen bucket.
• Replaces damaged or discolored ice bins that no longer retain or dispense ice properly.

• Disconnect power to the refrigerator before starting any repair to avoid injury.
• Remove remaining ice and allow any frost buildup to melt before removing the old bucket.
• Handle the plastic bucket carefully to avoid cracking; reinstall using the factory clips/screws as shown in your service diagram.

This guide rail is the replacement drawer slide that helps appliance drawers open and close smoothly, restoring proper alignment and reliable movement. Replaces worn or damaged rails to reduce sticking, wobbling, or uneven travel. What it does

• Guides the drawer along its track for smooth, controlled sliding motion
• Restores correct drawer alignment to prevent binding or uneven gaps
• Reduces noise and vibration caused by worn or bent rails
• Helps stabilize drawer loads for consistent opening and closing

• One guide rail

• Recommend matching left/right placement and rail orientation before fastening
• Use basic hand tools; avoid overtightening fasteners to prevent binding
• Inspect mating slides, rollers, and mounting points and replace if worn
• Disconnect power and follow appliance-specific service manual instructions for safe access

This relay cover is a protective housing that shields a washer or dryer relay assembly from dust, moisture, and accidental contact, helping maintain safe and reliable operation of the appliance's control components. What it does:

• Protects the relay and nearby wiring from debris and moisture that can cause shorts or corrosion
• Helps prevent accidental contact with relay terminals during maintenance
• Reduces risk of electrical arcing or damage when relays switch under load
• Can improve long-term reliability of the control assembly when installed and intact

• Disconnect power to the appliance before servicing to avoid electrical shock
• Remove access panels as needed to reach the relay area; basic hand tools typically required
• Handle control board and components carefully to avoid damage from electrostatic discharge
• Replace only with the specified cover; do not modify or force-fit

The Door Stopper Assembly is an OEM component specifically designed for LG refrigerators. It secures the fridge door in fully closed and aligned positions. 

The stopper assembly utilizes a pneumatic cylinder and integrated mounts to softly cushion door movement. This allows for smooth closing with an audible click to confirm proper sealing.

Causes of a bad stopper assembly can include cracked or leaking air cylinders after years of use. Loose or sheared mounting hardware may also cause improper alignment and restricted closure.

Symptoms of a bad door stopper assembly include: 

• Gaps forming around the door seal when closed
• Doors difficult to latch fully or align correctly  
• Premature cooling loss from unsealed openings

Replacing this LG part restores a snug, confirmed door shut. The OEM stopper components ensure dependable closing effort for efficient operation. This replacement is compatible with some Kenmore models as well.

This Tray Cover Assembly replaces a cracked, warped or missing tray cover to protect internal components and restore the appliance's original fit and finish. It provides a secure cover for the tray and helps contain spills and debris. What it does

• Covers and protects the underlying tray or compartment from spills and dirt
• Restores proper alignment and appearance to the tray area
• Helps prevent debris from falling into working components
• Commonly replaced when the cover is cracked, broken, or no longer seats properly

• Disconnect power to the appliance before starting any repair.
• Removal/installation may require basic hand tools; handle plastic parts carefully to avoid damage.
• Inspect surrounding components for damage while replacing the cover.

This cover assembly replaces a damaged or missing control-panel cover to restore a clean appearance and protect the controls from spills, dust, and accidental contact. It fits over the appliance control area and aligns with factory mounting points. What it does

• Shields the control board and buttons from moisture, debris, and impact
• Restores a finished, factory look to the control area
• Prevents accidental button presses caused by objects or debris
• Helps reduce the chance of corrosion or shorting on exposed controls

• One cover assembly as pictured

• Disconnect power before starting any repair to avoid shock or damage
• Installation typically requires removing trim or screws and snapping or fastening the cover into place
• Handle carefully to avoid scratching the finish; use correct fasteners and alignment for a secure fit

This Vegetable Tray Assembly is the removable crisper drawer insert that holds and organizes fresh produce in the refrigerator, helping contain spills and keep fruits and vegetables separated for easier access and cleaning. What it does:

• Replaces a damaged, cracked, or warped crisper tray to restore secure storage for produce
• Provides a flat, stable surface to support produce and smaller containers
• Helps contain minor leaks or spills, keeping the fridge floor cleaner
• Restores proper fit and sliding action of the crisper area when tray wear impedes operation

• Designed for simple drop-in replacement; remove crisper drawer to access tray
• Handle with care to avoid scratching or cracking the plastic during installation
• If the tray mounts to rails or clips, verify clips are intact before reinstalling
• Disconnect power or follow manufacturer safety guidance before working in the fridge

This lamp cover is the replacement plastic diffuser that protects the interior light and spreads illumination evenly inside the appliance. It restores a finished look and keeps the bulb shielded from spills and contact. What it does:

• Covers and protects the interior light bulb from moisture, food, and accidental contact
• Diffuses and softens the light for more even illumination
• Prevents loose debris from touching the bulb and reduces glare
• Useful when the original cover is cracked, discolored, or missing

• One lamp cover

• Disconnect power or unplug the appliance before servicing the light area
• Remove any screws or clips holding the old cover; handle plastic parts gently to avoid cracking
• Avoid touching the bulb with bare hands when replacing; allow bulb to cool first

This fan guide directs airflow from the evaporator/blower fan to the cabinet vents to help maintain even cooling and efficient air circulation. Replacing a damaged guide restores proper airflow and helps the cooling system perform as designed. What it does:

• Channels fan airflow to the vent path so cool air reaches refrigerator/freezer compartments
• Prevents air from recirculating inefficiently around the fan housing
• Helps reduce uneven temperatures and cold spots in the cabinet
• Can reduce frost buildup caused by disrupted airflow

• Disconnect power before servicing; follow appliance-specific disassembly steps
• Typically accessed by removing the rear evaporator or fan housing panel — use hand tools and avoid prying plastic parts aggressively
• Inspect mounting tabs and surrounding seals; replace if cracked or broken