Lsc27590sw Parts

The Door Stopper Assembly is an OEM component specifically designed for LG refrigerators. It secures the fridge door in fully closed and aligned positions. 

The stopper assembly utilizes a pneumatic cylinder and integrated mounts to softly cushion door movement. This allows for smooth closing with an audible click to confirm proper sealing.

Causes of a bad stopper assembly can include cracked or leaking air cylinders after years of use. Loose or sheared mounting hardware may also cause improper alignment and restricted closure.

Symptoms of a bad door stopper assembly include: 

• Gaps forming around the door seal when closed
• Doors difficult to latch fully or align correctly  
• Premature cooling loss from unsealed openings

Replacing this LG part restores a snug, confirmed door shut. The OEM stopper components ensure dependable closing effort for efficient operation. This replacement is compatible with some Kenmore models as well.

This fan guide directs airflow from the evaporator fan to improve cold-air circulation in the fresh food/freezer compartment. It restores proper air routing for more even cooling and reduces direct fan contact with other components. What it does:

• Channels cold air from the evaporator fan into the cabinet for consistent temperature distribution
• Keeps the fan blade aligned and prevents rubbing or contact with other parts
• Helps reduce noise caused by misdirected airflow or loose fan components
• Commonly replaced when cracked, broken, or warped from impact or age

• Disconnect power before servicing the appliance to avoid electrical shock
• Replacement typically requires removing the evaporator cover or inner liner to access the fan area
• Inspect surrounding mounts and fasteners; replace any damaged clips to ensure secure fit
• Handle plastic guide carefully to avoid cracking during installation

This refrigerator door gasket creates a tight seal around the door to help keep cold air in and warm air out, preserving food freshness and improving cooling efficiency. Fits as a direct replacement for a damaged or worn seal. What it does:

• Seals the door edge to maintain proper internal temperature and reduce energy loss
• Helps prevent frost build-up and moisture accumulation inside the compartment
• Reduces compressor run time by improving cabinet insulation
• Restores proper closing and latching when the original gasket is torn, warped, or compressed

• One door gasket

• Disconnect power before starting any repairs and remove food from the affected compartment
• Peel out the old gasket and clean the door frame; align new gasket with the door channel and press into place
• Some installations may require warming the gasket slightly or loosening hinge/retaining screws for proper fit; tighten screws and check seal
• Inspect the seal all the way around the door and adjust as needed; avoid using sharp tools that could damage the new gasket

This genuine replacement button assembly restores the control panel's tactile buttons so you can select settings and start cycles easily. It replaces damaged, missing, or worn buttons to recover normal front-panel input. What it does:

• Replaces broken, stuck, or missing control panel buttons so selections register properly
• Restores tactile feedback and button responsiveness for reliable operation
• Helps resolve symptoms like unresponsive buttons, intermittent input, or physically damaged keys
• Works as the user-facing interface component on the appliance control board

• Disconnect power to the appliance before starting any repair to avoid shock.
• Remove the control panel trim or bezel to access the button assembly; keep track of screws and clips.
• Gently release the old assembly and disconnect any ribbon or wire connectors; handle connectors and circuits carefully.

This Tray Cover Assembly replaces a cracked, warped or missing tray cover to protect internal components and restore the appliance's original fit and finish. It provides a secure cover for the tray and helps contain spills and debris. What it does

• Covers and protects the underlying tray or compartment from spills and dirt
• Restores proper alignment and appearance to the tray area
• Helps prevent debris from falling into working components
• Commonly replaced when the cover is cracked, broken, or no longer seats properly

• Disconnect power to the appliance before starting any repair.
• Removal/installation may require basic hand tools; handle plastic parts carefully to avoid damage.
• Inspect surrounding components for damage while replacing the cover.

This cover assembly replaces a damaged or missing control-panel cover to restore a clean appearance and protect the controls from spills, dust, and accidental contact. It fits over the appliance control area and aligns with factory mounting points. What it does

• Shields the control board and buttons from moisture, debris, and impact
• Restores a finished, factory look to the control area
• Prevents accidental button presses caused by objects or debris
• Helps reduce the chance of corrosion or shorting on exposed controls

• One cover assembly as pictured

• Disconnect power before starting any repair to avoid shock or damage
• Installation typically requires removing trim or screws and snapping or fastening the cover into place
• Handle carefully to avoid scratching the finish; use correct fasteners and alignment for a secure fit

This replacement funnel directs detergent or rinse-aid into the dishwasher dispenser for proper delivery during the wash cycle, restoring consistent cleaning and preventing spills or residue buildup around the dispenser area. What it does:

• Channels detergent or rinse-aid from the dispenser cup into the wash chamber for proper cleaning
• Helps prevent spills and messy residue around the dispenser
• Reduces risk of blockages that can stop detergent from reaching dishes
• Addresses symptoms like detergent collecting in the dispenser, visible residue, or poor dispensing

• Disconnect power to the appliance before starting any work
• Remove the dispenser assembly to access and replace the funnel
• Handle replacement funnel and surrounding plastic carefully to avoid cracking
• After installation, run a short test cycle to ensure proper dispensing and no leaks

This Vegetable Tray Assembly is the removable crisper drawer insert that holds and organizes fresh produce in the refrigerator, helping contain spills and keep fruits and vegetables separated for easier access and cleaning. What it does:

• Replaces a damaged, cracked, or warped crisper tray to restore secure storage for produce
• Provides a flat, stable surface to support produce and smaller containers
• Helps contain minor leaks or spills, keeping the fridge floor cleaner
• Restores proper fit and sliding action of the crisper area when tray wear impedes operation

• Designed for simple drop-in replacement; remove crisper drawer to access tray
• Handle with care to avoid scratching or cracking the plastic during installation
• If the tray mounts to rails or clips, verify clips are intact before reinstalling
• Disconnect power or follow manufacturer safety guidance before working in the fridge