Lsd556ost Parts

This inlet hose directs the incoming water supply into the appliance so it can fill and operate properly. Replacing a damaged or worn inlet hose restores a secure water connection and helps prevent leaks and fill issues. What it does:

• Channels household water from the supply to the appliance's fill system.
• Ensures a watertight connection at the water inlet to reduce leak risk.
• Restores normal fill behavior when a cracked, split, or clogged hose causes slow fill or no fill.
• Works with standard inlet fittings and clamps used on compatible appliances.

• One inlet hose.

• Turn off the water supply and unplug or disconnect power before servicing.
• Use the correct fittings and clamps; hand-start threads to avoid cross-threading, then snug with a wrench—do not overtighten.
• Inspect hose ends and inlet seal for damage; replace clamps or seals if needed.
• After installation, restore water and power, run a short fill cycle and check thoroughly for leaks.

Creates a watertight seal at water connections to prevent leaks. Replace when cracked, flattened, or worn. Confirm fit with your model number.

This customized screw secures appliance components where a standard fastener won't fit, helping keep panels, brackets and small assemblies stable. It's a direct-fit replacement when the original specialized screw is missing or damaged. What it does:

• Fastens and holds appliance panels, brackets or small parts in place
• Prevents rattling, loose trim or misaligned components caused by a missing or stripped screw
• Matches the OEM fit and thread pattern for proper engagement and alignment
• Used in locations that require a non-standard or customized fastener

• Disconnect power and water before servicing the appliance
• Use the correct screwdriver or driver bit to avoid stripping the head
• Tighten securely but do not overtighten; overtightening can strip threads or crack parts
• Keep removed hardware organized so you can reinstall in the original location

This is a slide rail and roller assembly that mounts on the right side of the dishwasher tub to support and guide the cutlery or dishrack as it slides in and out. The rollers allow the rack to move smoothly along the track. Replace this assembly if the rack is difficult to slide, feels wobbly, or the rollers are cracked, worn, or no longer turning freely.

Stopper roller guides and cushions dishwasher panels for smooth, quiet operation. Replace if door binds, rubs, or moves unevenly. Confirm fit with your model.

Mounting bracket that secures dishrack components in place inside your dishwasher. Replace if cracked, broken, or missing to restore stability.

The Grille Assembly is an OEM part for LG cooking ranges and range tops. It provides an additional flat-top cooking surface between the standard burner elements. The grille assembly itself is constructed of heavy-duty materials designed to withstand high heat levels while cooking.

Causes can be wear over time under heavy usage, accidental damage from cookware or cleaning, or failure of the heating elements underneath the plate.

Symptoms of a bad griddle plate include:

• Uneven or slow heating of the surface
• Warping or bending of the plate
• Scratches, cracks, or other surface damage
• Loose or missing mounting hardware

This LG part is also compatible with some Kenmore models.

This is a cast iron or heavy-duty metal grate that sits over the center burner on the range cooktop, providing a stable surface to support pots and pans during cooking. It is designed to fit between the outer burner grates for a continuous cooking surface. Replace this grate if it is cracked, warped, has broken feet, or no longer sits level on the cooktop.

This is a dishwasher control board assembly that manages all washing cycles and functions. It controls water temperature, spray patterns, cycle timing, and the heating element for drying. Replace this part if your dishwasher won't start, cycles don't complete properly, or the control panel becomes unresponsive.

This water tank assembly collects condensation produced during the drying cycle in a ventless or condenser dryer. It is a removable reservoir that must be emptied periodically to allow the dryer to continue operating. Replace this tank if it is cracked, leaking, or if the dryer displays a full tank error even after emptying.

If your range burners won't light or heat unevenly, the gas valve assembly may have failed. This part regulates gas flow to restore proper ignition.

Halogen oven light bulb illuminates your range interior for monitoring food while cooking. Replace when bulb burns out or flickers. Verify fit with your model.

The Module Display PCB Assembly is an OEM component specifically designed for LG dishwashers. Housed within the electronic control panel, this printed circuit board routes signals between control buttons and the dishwasher module. Integrated circuits process commands to start cycles and display settings through LED indicators. 

Causes of a bad module display PCB can include water damage into circuit paths, voltage fluctuations over time, or loose connections. Without a functioning interface, users are unable to select wash cycles or check cycle status.

Symptoms of a bad module display PCB include:

• Blank or unresponsive control panel 
• Inoperable buttons and dials
• Erratic lights and buzzers during cycles
• Diagnostic error codes shown

This LG OEM replacement restores dependable controls. Compatible also with Kenmore Elite dishwasher models, it provides a direct fit and easy restoration of washing functions. Proper installation protects future operations while maintaining convenience.

Small mounting bracket that secures internal dishwasher components in place. Replace if cracked, broken, or missing to stop rattling and maintain alignment.

This is a metal oven rack that slides into the guide rails inside the oven cavity, providing a flat surface to support cookware and bakeware during cooking. It allows air to circulate around food for even heating. Replace this rack if it is warped, rusted, or if the original rack was lost or damaged, which can result in uneven cooking or difficulty positioning dishes in the oven.

A replacement hinge spring that restores proper door tension and alignment for smooth opening and closing. Helps correct sagging or uneven door movement so the door seals and operates reliably when installed correctly. What it does:

• Provides tension for the door hinge to support and balance door movement during opening and closing.
• Helps the door close fully and stay aligned, reducing visible gaps or misalignment.
• Replaces worn or broken springs that can cause sagging, uneven closing, or noisy operation.
• Restores smoother, more controlled door action and reliable sealing when combined with intact hinge hardware.

• Disconnect power or unplug the appliance before starting any repair to avoid electrical hazards.
• Handle the spring carefully—stored tension can cause sudden movement; use proper tools and eye protection.
• Installation may require removing the door or hinge cover and supporting the door while swapping the spring.