Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Left side lid hinge. For right side use 8055256.
Replaced the control switch i ordered from APPLIANCE PARTS PRO. Robin was a very helpful person and sent me, by E-mail an owners manual to help me install the temperature control switch. THANKS AGAIN ROBIN.... Read more
With new ice maker, Read more
I unplugged the machine from the electric socket and removed the drain hose. I then shut the water valves to the unit. I removed the two screws from the rear sides of the control panel. I gently lifted the control panel and tilted it forward resting it on the lid of the machine to expose the control knobs. I removed the rubber tube and the plastic electric clip plug from the water level switch. This allowed me to twist the switch and lift it away from the panel. Time for the replacement... Read more
Researched this kenmore washer on-line and found the problem to be the lid switch. Saw a diagram on how to jump this switch by connecting a wire to both outside wires on the harness and voila! It worked! This is not a fix but it allowed me to finish the load of unwashed clothes and told me which part was bad (do not run washer jumped like this.......fire hazard!) Ordered the lid switch and it was an easy repair. A $14.00 switch was a lot cheaper than a $450.00 washer. Thanks appliance parts... Read more
After repairman ($80 service call) said it was the pump, I replaced it. Water still wouldn't drain so a second service call (no charge if within 90 days) was told it was a 2-way valve. Chain store wanted $150 for the part, bought with ApplianceParts.com for $95. I installed it, so far so good, machine seems to be operating just fine! Read more
White
I watched a few videos on you tube and thought I had a general idea on how to replace. The unit we have the top panel was attached from the side panels below the top panel,so I had to remove the three sides and top. I kept all the screws and attachments in order, vacuumed and cleaned the best I could.Once the top panel was replace I was able to reinstall the sides.That was a little time but got it done. Read more
Water temperature control board.
Bought replacement knob. Didn't need the metal insert. Read more