Lsxs26386s Parts

A film radial capacitor used in appliance electrical assemblies to stabilize voltage and support motor and control circuits. Replaces a worn or failed film capacitor to restore consistent operation and reduce electrical noise. What it does:

• Smooths and stabilizes voltage in motor and control circuits to help maintain reliable operation
• Reduces electrical noise that can cause humming or erratic behavior in appliances
• Helps ensure consistent motor start/run performance when the capacitor is the cause of symptoms
• Commonly replaced when appliances exhibit intermittent starts, humming, or control board errors linked to compromised capacitors

• Disconnect power to the appliance before accessing electrical components
• Discharge the capacitor safely before touching terminals to avoid shock
• Observe correct polarity/terminal orientation and secure connections per OEM guidance

This upper hinge assembly secures and guides the refrigerator's top door, restoring proper door alignment and smooth opening/closing. Replaces a worn or damaged hinge to help stop sagging, rubbing, or uneven sealing. What it does:

• Supports the top door and attaches it to the cabinet for stable operation
• Guides door movement so the door opens and closes smoothly
• Restores proper door alignment to improve seal and reduce rattling
• Addresses symptoms like a drooping or misaligned door, noisy hinge action, or doors that don't latch evenly

• Disconnect power (unplug the appliance) before starting any repair
• Support the door weight before removing the hinge to avoid dropping or damaging the door
• Basic hand tools typically required; follow OEM diagram for correct fastener locations and orientation

This replacement fan assembly restores airflow in your appliance's cooling system to help maintain proper temperature and circulation. It's a direct-fit replacement designed to stop airflow-related issues and reduce noise from a failing fan. What it does:

• Circulates air across evaporator/condenser coils to support proper cooling and defrost cycles
• Replaces a worn or failed fan that can cause warm compartments or poor cooling
• Helps eliminate unusual humming, grinding, or rattling caused by a damaged fan blade or motor
• Supports even temperature distribution and can reduce frost buildup when fan operation is restored

• Disconnect power before starting; work on powered appliances can cause shock or injury
• Handle the fan blade carefully to avoid bending blades or damaging the motor
• Secure mounting fasteners to prevent vibration

This holder secures the dryer-related assembly in place to reduce movement and wear, helping maintain proper alignment and quieter operation. It's a simple replacement that restores part stability in the appliance. What it does:

• Secures a dryer assembly or component to the appliance frame to prevent shifting
• Helps reduce vibration and rubbing noises caused by a loose part
• Maintains correct alignment so related parts operate smoothly
• Used when the existing holder is cracked, broken, or missing

• Disconnect power before replacing any dryer components to avoid shock or injury
• Access location and removal steps vary by model; follow the appliance's service manual or exploded view
• Keep fasteners and adjacent parts organized for reassembly; replace any damaged clips or screws

This rear cabinet cover replaces a damaged or missing TV back panel to protect internal electronics and restore the set's finished appearance. It provides a secure mounting surface and helps keep dust and debris out of the chassis. What it does

• Shields internal circuit boards, power supply and connections from dust, impact and accidental contact
• Restores proper alignment and attachment points for the TV chassis and external connectors
• Eliminates rattles or loose fit caused by cracked or broken mounting tabs
• Helps maintain proper ventilation paths around internal components when installed correctly

• Unplug the TV and place on a soft, protected surface before starting; handle cover edges carefully to avoid cuts.
• Keep and reuse original screws and any attached hardware unless replacements are specified.
• Align mounting tabs and connectors before tightening fasteners; do not force or overtighten to avoid breaking plastic tabs.
• If internal access is required, refer to the TV's service manual; do not touch exposed boards while the set is powered.

This DC drive motor powers the washer drum, restoring agitation and spin so loads clean and drain properly. It replaces a failed drive motor to help appliances resume normal wash and spin cycles. What it does:

• Turns the drum for agitation and high-speed spin to remove water from clothes
• Replaces motors that hum, do not spin, or have irregular rotation
• Can stop or reduce vibration and noise caused by a failing motor
• Helps resolve wash cycles that stall or fail to advance due to motor faults

• Disconnect power and water before starting any repair
• Remove outer panels and drum access components as required for your model
• Handle the motor and rotor carefully; support the assembly to avoid damage
• Verify electrical connections and mount alignment before restoring power; test with no load

This door foam assembly restores the insulating core inside a refrigerator door to help maintain consistent interior temperatures and reduce cold spots. Replacing damaged or waterlogged door foam improves efficiency and reduces condensation risk. What it does:

• Replaces the internal insulation foam inside the refrigerator door to restore thermal performance.
• Helps reduce door cold spots and uneven cooling caused by damaged or compressed foam.
• Can lessen interior condensation and frost build-up associated with compromised door insulation.
• Reduces transfer of exterior temperature to the cabinet, supporting overall cooling efficiency.

• Disconnect power to the appliance before starting any repair and remove food from the door area.
• Door panel removal is typically required; keep screws and clips organized for reassembly.
• Take care not to damage the door liner or gasket when removing/installing the foam; use appropriate trim tools.

Replacement door basket that restores secure storage on the refrigerator door, keeping bottles, condiments and small items organized and preventing them from shifting or falling when the door is opened. What it does:

• Provides a stable shelf on the refrigerator door for bottles, jars and small items.
• Replaces cracked, broken or warped baskets that allow items to tilt or fall.
• Snaps or slides into the door shelf supports to restore original storage capacity.
• Keeps frequently used items accessible and helps prevent interior clutter.

• Remove all contents from the existing door shelf before removing the old basket.
• Most installs are done by aligning the basket with the door clips or tracks and pressing until it snaps into place; use gentle, even pressure.
• If fasteners are present, keep them and reattach as needed; follow the refrigerator's service manual or exploded parts diagram to confirm orientation.

This upper drawer tray assembly supports and contains items in the refrigerator's top drawer, restoring a stable surface and helping prevent spills or sagging. Designed to replace a cracked, warped, or damaged upper drawer tray. What it does:

• Provides a flat, stable base for the upper refrigerator drawer so items sit level
• Keeps small items contained to reduce shifting and spills inside the drawer
• Restores proper drawer alignment and smooth sliding when a broken tray causes binding
• Helps prevent moisture pooling when the original tray is cracked or distorted

• Unplug the refrigerator or disconnect power before servicing to avoid electrical hazard
• Remove food and slide out the drawer fully to access and replace the tray
• Handle the replacement part carefully to avoid scratching or chipping; reassemble in reverse order
• If you encounter resistance or misalignment after installation, double-check tray seating and drawer rails

This door foam assembly cushions and insulates the home-bar compartment door to help maintain cold temperatures and reduce vibration. It replaces worn or damaged foam to restore a tighter door seal and quieter operation. What it does:

• Provides insulation inside the home-bar compartment door to help maintain consistent temperatures
• Fills the internal cavity and supports the door panel for proper alignment
• Helps reduce rattling or vibration caused by degraded or missing foam
• Can prevent minor cold air loss that occurs with deteriorated door insulation

• Designed for direct replacement; follow the refrigerator service manual for disassembly and reassembly steps
• Use proper tools and avoid sharp objects that could damage the foam or door panel
• Disconnect power to the appliance before starting work to prevent electrical hazards

This handle assembly replaces a damaged or loose refrigerator door handle so the door opens and closes securely and looks finished. It restores full grip and alignment without replacing the entire door. What it does:

• Replaces a cracked, broken or loose door handle to restore safe, stable opening and closing
• Provides a finished, OEM-fit grip that maintains door alignment and seal function
• Helps stop rattling or wobble caused by a worn or stripped handle mounting
• Matches factory mounting points for a direct-replacement installation

• Disconnect power to the refrigerator before starting and work with the door empty if possible
• Remove any trim or end caps and retain mounting screws for reuse; handle secures with hidden fasteners
• Use basic hand tools; avoid overtightening fasteners to prevent cracking the handle
• If gasket or trim is disturbed, check alignment and seal before finishing