Lte 5243 Dqa Parts

This Fan Blade is an OEM part for LG microwaves. It is a critical component designed to circulate air within the microwave, aiding in heat dissipation and ensuring even cooking. 

Fan blades in microwaves can suffer from wear, imbalance, or damage due to regular use or accumulation of debris. A malfunctioning fan blade can lead to inadequate ventilation, affecting the microwave's cooking efficiency and potentially causing overheating.

Symptoms of a bad fan blade include:

• Unusual noises during operation, such as rattling or buzzing, indicate a loose or damaged blade.
• The microwave overheating or shutting off prematurely.
• Inconsistent cooking or hot spots in food suggest poor air circulation.
• The fan not starting, or stopping unexpectedly during use.
• Visible signs of damage or wear on the blade.

This OEM LG part is also compatible with some Sears/Kenmore models.
 

This customized screw is the exact fastener specified by the manufacturer to secure components in select LG appliances. Replacing a missing or stripped screw restores a tight, rattle-free fit and helps maintain proper alignment over time.

• Secures panels, brackets, and internal assemblies at original mounting points
• Helps reduce vibration and rattling noises from loose hardware
• Replaces missing, rusted, or stripped screws
• Supports stable operation by keeping parts firmly in place

• Disconnect power; shut off water or gas before service
• Match the screw to the exact location using your model's parts diagram
• Start threads by hand; tighten snugly without overtightening to avoid stripping
• Use the correct driver bit for the head style to prevent damage

This control board assembly directs power and communication to key components, interpreting inputs and sensor signals so the appliance runs the correct functions and cycles. Replaces a failed electronics module to restore reliable operation.

• Distributes power and control signals to major components per the unit's programmed logic
• Interfaces with sensors and the user controls to execute selected functions
• Coordinates cycle timing and safety monitoring
• Common signs of failure: no power or won't start, unresponsive controls/display, intermittent operation, error codes, or unexpected shutdowns

• Disconnect power to the appliance before servicing
• Handle the board by the edges; use ESD protection to avoid static damage
• Photograph and label connectors, then transfer them one at a time to the new board
• Secure wiring to avoid pinching; follow the unit's tech sheet or service manual

This factory screw secures appliance panels and components, keeping them properly aligned and quiet during operation. Replace a stripped, corroded, or missing fastener to restore a snug fit and dependable performance in the original mounting location. What it does:

• Fastens brackets, panels, trim, or internal hardware to the cabinet/frame as specified by the manufacturer
• Helps maintain proper alignment and reduce rattling or vibration when a screw is worn or missing
• Direct replacement for damaged, stripped, or rusted hardware
• Used in various locations per the service diagram; match to the original position

• 1 screw

• Disconnect power (and shut off water or gas, if applicable) before servicing.
• Compare length and thread style to the original; install in the same location.
• Start threads by hand to avoid cross-threading; tighten until snug—do not overtighten.
• Reinstall any brackets or panels in the correct order.

This knob assembly replaces a worn or damaged control knob so you can reliably set your appliance's controls. It restores a secure grip and smooth turning for precise adjustments and a clean, like-new appearance.

• Attaches to the control shaft/valve to select and adjust settings
• Restores smooth, consistent turning and clear pointer alignment
• Common fix for a knob that is cracked, stripped, loose, slipping, or missing
• Helps ensure accurate adjustments across the control's full range

• Disconnect power and allow all surfaces to cool; shut off gas supply if working near burner valves (gas models)
• Pull the old knob straight off the shaft—avoid prying on the panel or bending the stem
• Align the new knob with the shaft orientation and press firmly until fully seated
• Rotate through the full range to ensure proper engagement and operation

This handle supporter is the bracket that anchors the door handle to the appliance door, keeping the handle secure and aligned. Replacing a cracked or stripped supporter restores a solid, dependable grip on the door.

• Secures the handle to the door and maintains proper alignment
• Helps fix a loose, wobbly, or detached handle
• Replaces a broken or worn mounting bracket that won't hold screws

• Disconnect power and, if applicable, shut off water before service
• Remove the handle and any trim to access the supporter and mounting screws
• Transfer or replace screws as required; do not overtighten into plastic
• Verify handle alignment and operation before fully reassembling

This replacement ring secures or positions a nearby appliance component to restore proper alignment and stable operation. It's a small but important part that helps reduce excess movement and related wear. What it does:

• Holds or locates a mating component to prevent unwanted movement or misalignment
• Helps reduce vibration and knocking noises caused by loose parts
• Restores correct spacing that maintains smooth mechanical operation
• Can prevent accelerated wear on adjacent parts when functioning properly

• Disconnect power (and water supply if applicable) before beginning any repair
• Access location may require removing panels or trim; keep fasteners organized
• Inspect surrounding parts for wear or damage and replace if needed

This heater mounting bracket secures the appliance's heating element in the correct position for safe, reliable operation. Replacing a bent or missing bracket helps prevent vibration, contact damage, and uneven heating from a sagging element.

• Holds the heater element firmly and maintains proper alignment/clearance
• Helps restore stable heating when the element has shifted or loosened
• Replaces brackets that are bent, cracked, corroded, or missing
• Can reduce rattling or vibration noises from the heater area

• Disconnect electrical power before servicing; allow hot components to cool
• Access the heater area and document original routing and hardware
• Transfer the heater to the new bracket; reuse original screws/clips if serviceable
• Verify proper clearances from wiring and panels before restoring power

This bulkhead is the front interior panel that supports the drum and helps direct dryer airflow for efficient tumbling and exhaust. It restores proper drum alignment and airflow when the original panel is worn or damaged. What it does:

• Provides a stable mounting surface for the drum and front bearing/glide assembly
• Helps channel air from the drum to the exhaust path for consistent drying
• Prevents drum wobble and rubbing that can cause noise or fabric wear
• Reduces air leaks and hot spots that can extend dry times or trigger heat issues

• One bulkhead panel

• Disconnect power and venting before beginning any repair
• Removing the front panel and drum is typically required to access and replace the bulkhead
• Inspect drum seals, rollers, and bearings while the dryer is open; replace any worn components
• Use appropriate tools and follow OEM instructions.

This knob assembly replaces a worn or damaged appliance control knob, restoring tactile control and clear settings feedback for smooth operation. It fits the original control shaft and lets you select cycles or heat levels with confidence. What it does:

• Replaces a stripped, cracked, or loose control knob so selections register properly
• Provides a secure grip and audible/physical detents for accurate setting changes
• Restores visual indicator alignment so chosen settings are easy to read
• Helps stop unintended setting changes caused by slipping or broken knobs

• Disconnect power (or unplug appliance) before installing to avoid shock or injury
• Pull off the old knob; push the new knob fully onto the control shaft until seated
• Do not force or wiggle excessively—ensure splines align with the shaft to avoid damage

This door packing gasket creates a tight seal around the appliance door to help maintain internal temperature and reduce moisture intrusion. Replacing a worn gasket restores proper sealing and helps prevent frost, leaks, and energy loss. What it does:

• Seals the door to keep cold air in and warm air out
• Helps prevent frost and moisture buildup inside the compartment
• Reduces air leaks that can cause uneven temperatures or longer run times
• Restores proper door closure when the old gasket is torn, deformed, or no longer flexible

• One door packing gasket

• Disconnect power to the appliance before beginning any work
• Clean the gasket channel and door edge before installing the new gasket for a secure fit
• Start installation at one corner and work around the door, pressing the gasket evenly into the channel
• Inspect the new gasket for proper seating and close the door to confirm a uniform seal; replace if damaged during handling

This cover assembly replaces a damaged or missing Poise cover to restore the appliance's exterior protection and appearance. It helps shield internal components from dust and physical damage while keeping the unit looking finished. What it does:

• Covers and protects internal components in the Poise area of the appliance
• Prevents debris and moisture from reaching internal parts that could cause operational issues
• Stops rattling or loose-panel noises caused by cracked or missing covers
• Restores the unit's finished exterior where the original cover is worn or broken

• Disconnect power to the appliance before beginning any work to avoid electrical shock
• Installation typically requires removing fasteners; keep hardware organized for reassembly
• Inspect adjacent parts for damage while replacing the cover and replace any worn fasteners
• Refer to OEM instructions for model-specific removal and installation steps

This replacement knob assembly restores user control of the appliance's settings by providing a secure, easy-to-grip control for selecting heat and cycle options. Replaces worn or damaged knobs to improve accuracy and usability. What it does:

• Provides a user interface for turning and selecting settings on the control panel.
• Ensures positive detent engagement so selections stay set during use.
• Replaces cracked, stripped, or missing knobs that are hard to grip or won't turn.
• Helps eliminate intermittent or incorrect setting selection caused by damaged knob externals.

• One complete knob assembly

• Power off and unplug the appliance (or disconnect power at the breaker) before beginning any repair.
• Knob typically pulls straight off the control shaft; align splines and press firmly to install.
• Do not force the knob onto a damaged control shaft; inspect shaft for wear and replace underlying parts if needed.

This single wiring harness routes electrical power and signals between components to restore proper connections and reliable operation. It replaces a damaged or worn harness to help eliminate intermittent power or control issues. What it does:

• Transfers power and control signals between appliance components to maintain proper function
• Replaces frayed, burnt, or damaged wiring that can cause intermittent operation or component failure
• Helps resolve symptoms like loss of power to a module, erratic behavior, or failure to respond
• Provides a direct plug-and-play connection when matching the correct factory harness

• Disconnect all power (unplug or switch off circuit breaker) before starting any work
• Handle connectors gently and seat firmly until they click into place

The Sub PCB Assembly is an OEM component specifically designed for LG electric ranges. Located underneath the control panel, this circuit board helps direct power to key interfaces and safety components. Integrated programs support precision cooking functions.  

Causes of a bad sub PCB can include water damage, loose connections over time, or defects preventing communication between main controls. Without a functioning sub-board, the oven and burners receive inconsistent direction.

Symptoms of a bad sub PCB include:

• Erratic or failed temperature/time displays  
• Inoperable or intermittent oven/burner control dials
• Physical damage or condensation visible on circuitry
• Error codes appear between main and sub-board communication  

This LG OEM replacement ensures all systems interface safely and smoothly. Proper installation maintains full-range operation, convenience, and dependability. Compatible also with Sears/Kenmore electric ranges for seamless replacement and repairs.