Lw2511er Parts

The Control Board is an OEM part for LG air conditioners. It manages and regulates the various functions of the air conditioner, including temperature control, fan speed, and operational modes, ensuring optimal performance.

Causes of a bad control board can include electrical surges, component failure due to overheating, or wear and tear over time. A faulty control board can result in inconsistent or non-functioning control of the air conditioner's settings.

Symptoms of a bad control board include:

• Air conditioner not turning on
• Inconsistent temperature control
• Non-responsive controls
• Error codes displayed on the unit

This OEM LG part is also compatible with Sears/Kenmore models.

The Display PCB Assembly is an OEM part for LG microwaves. Located behind the control panel, it houses the critical electronic components that power the display screen and control functions. The PCB assembly is designed to interface the control inputs and outputs with the microwave's operational systems.   

Causes of a failing PCB can include moisture damage, component failure due to power surges, or cracks/breaks from accidental impact over time.

Symptoms of a bad Display PCB Assembly include:

• Black or non-responsive touchscreen  
• Inability to power on or select cooking presets
• Erratic control behaviors such as random button presses
• Recurring electronic or operational error codes

This OEM LG replacement part is also compatible with Sears/Kenmore microwave models. 

This multi-wire harness connects the control and several components inside your appliance, carrying power and signals through factory-molded connectors. Replace a damaged harness to restore reliable electrical connections and eliminate intermittent or dead component behavior. What it does:

• Distributes power and control signals between the appliance's control and multiple components via keyed connectors
• Restores secure connections when original wires or plugs are burned, loose, or damaged
• Maintains proper routing and strain relief to help prevent chafing, shorts, and intermittent faults
• Symptoms include intermittent operation, a component not running, failure to start, error codes, or visible heat damage/burnt odor from the wiring

• 1 multi-wire harness assembly

• Disconnect power to the appliance before servicing; turn off water or gas if applicable
• Photograph routing and connector locations before removal; transfer any clips/ties/retainers from the old harness
• Seat connectors fully; do not pull on wires—work by the connector bodies and match keyed plugs carefully
• Route away from sharp edges, moving parts, and hot surfaces; secure with all original clips and tie-downs

This multi harness is a factory-style wiring harness that connects multiple electrical components to deliver power and control signals, restoring reliable electrical communication for the appliance. What it does:

• Routes power and signal connections between control boards, sensors, switches and motors
• Replaces damaged or broken wiring that can cause intermittent or no power to components
• Common symptoms: appliance won't start, controls unresponsive, intermittent operation, or error codes related to communication
• Restores proper electrical connections when original harness shows wear, frayed wires, or connector damage

• Disconnect power to the appliance before starting any work
• Handle connectors gently; match connector shapes and colors for correct installation
• Route harness along original wire channels and secure with clips or ties—avoid sharp edges and heat sources

This remote controller assembly replaces a malfunctioning TV remote control PCB and housing to restore infrared/IR command transmission and on-unit button control. Ideal when the remote stops responding or buttons become unresponsive. What it does:

• Replaces the internal PCB and button assembly that sends IR signals to the TV.
• Restores remote control functions like power, volume, channel, and input selection.
• Helps resolve symptoms such as no response from the remote, intermittent commands, or stuck/non-working buttons.
• Works with the existing remote cover and batteries if those components are reused.

• Disconnect power to the TV and remove batteries from the remote before replacing the assembly.
• Use appropriate small screwdrivers and keep track of screws and clips; handle the PCB by its edges to avoid damage.
• Reassemble carefully, insert fresh batteries, and test all functions after installation.

Restore full remote control function with this replacement remote controller assembly. Replaces a damaged or unresponsive remote PCB and button cluster so the unit responds reliably to power, volume, input and menu commands. What it does:

• Replaces the internal circuit board and button interface that transmit IR/remote signals.
• Fixes symptoms like unresponsive or intermittent buttons, no power or no signal from the remote.
• Restores control of common functions such as power, volume, input selection and menu navigation.
• Useful when buttons are stuck, the remote was dropped, or the internal electronics are damaged.

• Remove batteries and disconnect power from the appliance before replacing the assembly.
• Handle the PCB by its edges to avoid damage from static or oils; keep small screws and clips organized.
• Reassemble the remote housing carefully to avoid pinching ribbons or misaligning buttons.

This air filter assembly helps keep interior air fresh by capturing odors and airborne particles in compatible LG appliances. It replaces a worn or dirty filter assembly so the appliance can maintain cleaner-smelling air. What it does:

• Houses the replaceable filter media that helps reduce odors and common airborne particles
• Restores proper airflow through the appliance's air-cleaning path when worn or clogged
• Helps maintain a fresher-smelling interior environment between service intervals
• Serves as the factory replacement component designed to match original fit and function

• Disconnect power to the appliance before accessing internal components.
• Handle the assembly carefully to avoid damaging the filter media or housing.
• Follow the appliance manufacturer's instructions for removing and installing the assembly.
• Replace periodically or when performance declines; dispose of used filter media per local regulations.

This AC drive motor powers the appliance's drum or agitator, restoring reliable rotation and cycle operation. Replacing a faulty motor can resolve stopping, failure to spin, or unusual noises and vibrations. What it does:

• Provides the rotational force to turn the drum/agitator during wash or dry cycles.
• Restores normal start/stop and speed control when the original motor fails.
• Commonly replaces motors that hum, run intermittently, or produce grinding or rattling noises.
• Helps eliminate erratic cycling or no-spin conditions caused by motor failure.

• One AC drive motor

• Disconnect power and water before any service.
• Handle the motor carefully — it may be heavy or have fragile wiring and connectors.
• Verify connector orientation and mounting alignment before final reassembly.

This clamp secures a line or connection inside your appliance, maintaining a tight fit under vibration. Replacing a fatigued clamp helps prevent leaks or disconnections and keeps components anchored so the system operates reliably.

• Holds a line/fitting firmly to keep the joint sealed and secure
• Helps prevent leaks or disconnections at hose/tube connections
• Resists vibration that can loosen fittings during operation
• Replace if bent, weakened, or corroded, or if the connection repeatedly loosens

• Disconnect power and, if applicable, shut off water supply before service
• Note clamp orientation and routing; seat the clamp just behind the fitting bead/stop
• Use the correct tool for your clamp style to compress or tighten evenly
• After reassembly, restore utilities and test for leaks or movement

This power cord assembly delivers mains power to the appliance and restores a reliable electrical connection. Designed as a direct-replacement cord to replace a damaged or worn power lead and restore normal operation. What it does:

• Re-establishes the appliance's connection to household mains power.
• Replaces frayed, melted, or broken cord insulation and damaged plug ends.
• Helps stop intermittent power loss or overheating at the cord connection.
• Restores proper grounding where a grounded cord is required.

• Disconnect power at the outlet or breaker before servicing.
• Verify cord routing and strain relief match the original installation.
• Inspect connectors and cabinet entry for damage; replace strain relief or terminal block hardware if worn.