Mav275aww Parts

This replacement screw secures panels, brackets, and internal components inside your appliance to keep them aligned and rattle-free. Replace stripped, rusty, or missing hardware to restore a tight fit and dependable operation.

• Holds metal panels, brackets, ducts, or trim in place
• Helps maintain alignment and reduces vibration and noise
• Replaces missing, corroded, or stripped screws
• Common symptoms: loose panel or component, rattling/buzzing during use, screw won't tighten

• Disconnect power and shut off gas/water before servicing
• Start threads by hand to avoid cross-threading; use the correct driver
• Replace one fastener at a time to maintain alignment
• Tighten snugly—do not overtighten to prevent stripping

This cabinet top clip is a small plastic retainer that secures the appliance's top/cabinet to the chassis, keeping the cabinet aligned and preventing movement or rattling. It restores a flush fit between the cabinet and body. What it does:

• Secures the top/cabinet panel to the appliance frame so the cabinet stays in place
• Prevents the cabinet from shifting, vibrating, or sitting unevenly
• Helps stop gaps that can let dirt or moisture into cabinet seams
• Common symptom: loose, rattling, or misaligned cabinet top or trim

• One cabinet top clip

• Always disconnect power before servicing the appliance
• Remove necessary trim or panels to access the cabinet clip; a screwdriver or trim tool may be needed
• Replace broken or worn clips with matching parts only; inspect surrounding fasteners for damage

Size: 10-24 x .50 HXNI.

This is a genuine replacement screw that secures appliance panels and small components to restore proper fit and reduce noise. Use it to replace missing or stripped fasteners for a secure, long-lasting connection. What it does:

• Fastens panels, brackets, trim, and small internal components
• Restores proper alignment to eliminate vibration or rattling
• Replaces missing or damaged screws that cause loose parts
• Helps ensure panels and assemblies stay securely mounted during operation

• Disconnect power and/or gas supply before working on the appliance
• Use the correct screwdriver or driver bit to avoid stripping the head
• Hand-start the screw, then tighten firmly but avoid over-torquing
• If threads are damaged, replace with the correct OEM screw rather than re-using

This plastic snap-in clip secures interior panels, trim pieces, or lightweight components to appliance frames, keeping parts held firmly and reducing rattles or sagging. It's a simple, reliable fastener for replacements and repairs. What it does:

• Secures panels, trim, wire harnesses, or insulation to the appliance frame
• Restores proper fit and alignment when a worn or broken clip allows gaps or movement
• Helps eliminate rattling, vibration noise, or loose parts caused by a missing fastener
• Low-profile design snaps into place for a finished appearance

• One plastic snap-in clip (quantity: 1)

• Usually installs by pushing the clip into the matched hole until it snaps; may require a small flat tool to remove the old clip
• Inspect mating hole and surrounding area for damage before installing replacement
• Disconnect power and empty the area if working near heating elements or electrical components

A snap-style hose clamp that secures flexible appliance hoses to fittings to help maintain a leak-free connection. Simple, durable replacement for a lost or worn hose clip to keep hoses seated and stable. What it does

• Secures a flexible hose to a nipple or barb to help prevent accidental disconnection
• Helps maintain a tight connection that reduces risk of leaks at the hose joint
• Commonly used on drain, fill, or internal circulation hoses where a small snap clamp is required
• Small, low-profile design fits in tight spaces and resists shifting under normal use

• One snap-style hose clamp

• Disconnect power and shut off water supply before beginning any repair
• Access may require removing panels or disassembling interior components depending on appliance
• Pry open or compress the clip as needed with pliers to remove and reinstall; ensure hose is fully seated on the fitting before securing
• Inspect the hose and fitting for damage; replace hose if cracked or degraded

Color: White

This brake spring restores proper tension in the washer's transmission brake so the basket stops promptly and releases cleanly for spin. Replacing a fatigued or broken spring helps bring back smooth, reliable spin and stopping performance.

• Maintains brake tension to hold the basket stationary between cycles
• Releases the brake during spin so the basket can reach proper speed
• Helps stop the basket smoothly at cycle end
• Common signs include no/slow spin, basket coasting too long after spin, or brake squeal/grinding when stopping

• Disconnect power and water before servicing; wear gloves and eye protection.
• The brake spring is under tension—secure the assembly and carefully relieve spring force before removal.
• Access typically requires removing drive components to reach the brake assembly; support the washer safely if tilted.
• After installation, hand-rotate the drive pulley to ensure smooth brake engagement and release before running a test cycle.

This lid switch assembly kit is the washer's safety interlock. It detects when the lid is closed so the control can allow the machine to spin, helping restore safe, reliable operation when the original switch fails.

• Senses lid closed and enables the spin cycle
• Prevents spinning with the lid open for safety
• Common failure symptoms: no spin or intermittent spin
• Requires pressing or jiggling the lid to run; no audible "click" when closing the lid

• Disconnect power before servicing
• Access the switch under the top/console area; remove the old switch/bracket as designed
• Route wiring along the original path and secure away from moving parts
• Align the actuator so the lid reliably engages the switch; test spin operation before reassembly

Mounting screw used to secure panels, trim, brackets, and small appliance components. Replace a missing or damaged fastener to restore proper fit, reduce vibration, and keep parts aligned for safe operation. What it does:

• Secures panels, control boards, brackets, and trim to maintain correct assembly
• Replaces stripped, broken, or missing screws that cause loose or rattling parts
• Helps prevent misalignment that can interfere with doors, knobs, or covers
• Standard fastener interface — use the correct driver and size for a secure fit

• Disconnect power and/or gas and follow appliance safety procedures before servicing
• Use the correct screwdriver or bit to avoid stripping the head
• Do not overtighten; snug until secure to avoid damage to threads or surrounding parts
• If threads are damaged, replace the mating component or use the correct thread-repair method

This lid switch housing secures and protects the washer's lid switch assembly so the machine can detect the lid position reliably. It replaces a cracked or broken housing to restore proper switch alignment and protection. What it does:

• Holds the lid switch assembly in the correct position for reliable lid detection.
• Shields the switch from impacts and debris that can cause intermittent failures.
• Common symptom: washer won't start, won't spin, or shows lid-lock-related errors when the housing is damaged.
• Restores consistent electrical/mechanical engagement between the lid and switch when installed correctly.

• Unplug the appliance before beginning any service to avoid shock or injury.
• Basic hand tools are typically needed; follow the OEM diagram for correct removal and reassembly.
• Inspect the lid switch and wiring while replacing the housing; replace any damaged components.

This Timer Knob is an OEM part for Whirlpool washers. It attaches to the washer timer and allows users to select different wash cycles by turning the timer to the desired setting. Its sturdy construction ensures accurate timing and ease of use throughout the washer's life.

The most common causes of a faulty timer knob include general wear over time due to regular use, physical damage resulting from mishandling or impact, and internal stripping of the knob teeth that can make it difficult to engage with the timer shaft.

Color: Gray

Symptoms of a faulty timer knob include:

• Difficulty turning the timer
• Inability to select or change wash cycles
• The knob spins freely without adjusting the cycle setting

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This locknut is a small threaded retaining nut used to secure rotating and stationary appliance components, helping keep assemblies tight and stable during operation. It prevents parts from loosening and reduces vibration-related issues. What it does:

• Secures shafts, pulleys, or fittings to prevent axial movement
• Keeps assemblies fastened under normal vibration and load
• Helps stop wobble, grinding, or part separation caused by a loose connection
• Works with the matching threaded stud, shaft, or fitting for a proper hold

• Disconnect power and follow appliance safety procedures before servicing
• Use the matching thread size and engage threads fully; hand-start before tightening
• Tighten securely without overtightening; use the correct driver or socket for the nut
• Inspect mating threads and replace if damaged