Mav700aww Parts

Screw: 8-16 x 3/8 inch.

Motor plate isolator.

This motor isolator is a rubber mounting that cushions and secures the washer motor, reducing vibration and noise during spin cycles and helping protect the motor and chassis from premature wear. What it does:

• Cushions the motor to reduce vibration and minimize rattle and noise during operation
• Keeps the motor properly positioned to prevent rubbing or misalignment
• Helps protect motor and surrounding components from shock and movement
• Common symptom linkage: excessive vibration, loud noise during spin, or visible motor shifting

• Disconnect power to the appliance before starting any work.
• This part mounts between the motor and chassis; access typically requires tilting or removing the washer cabinet or accessing the underside.
• Inspect adjacent mounts and fasteners; replace any worn hardware and use the exact OEM part for proper fit.

This water inlet valve controls water flow into the appliance so it fills only when needed, restoring proper fill cycles and preventing overfilling or no-fill problems. Replaces a worn or failed inlet valve to recover normal operation. What it does:

• Opens and closes water flow to the appliance during fill cycles
• Helps maintain correct water level for proper operation
• Commonly replaces failed valves that cause no water, slow fill, or continuous filling
• Stops water flow when the cycle is finished to prevent overfilling or flooding

• Disconnect power and shut off the water supply before starting any repair.
• Verify inlet hoses and fittings are in good condition; replace if damaged.
• Installation typically requires basic hand tools and may involve disconnecting hoses and electrical connectors.
• After installation, restore power and water, then run a short cycle and check for proper fill and leaks.

This tub bolt fastens the washer's inner tub to its hub/drive assembly, keeping the basket stable during agitation and spin. Replacing a worn or missing bolt restores a secure connection and helps reduce vibration and noise.

• Secures the spin basket to the drive hub/shaft
• Helps maintain proper tub alignment and stability
• Common fix for rattling, excessive vibration, or loose tub movement
• May prevent spin errors caused by a shifting basket connection

• Unplug the washer and shut off water supply before service
• Access is typically from the top by removing the agitator or washplate
• Use the correct socket/driver; do not over-tighten
• Inspect companion hardware (hub, spacer, washers) and replace if worn

This cabinet top clip is a small plastic retainer that secures the appliance's top/cabinet to the chassis, keeping the cabinet aligned and preventing movement or rattling. It restores a flush fit between the cabinet and body. What it does:

• Secures the top/cabinet panel to the appliance frame so the cabinet stays in place
• Prevents the cabinet from shifting, vibrating, or sitting unevenly
• Helps stop gaps that can let dirt or moisture into cabinet seams
• Common symptom: loose, rattling, or misaligned cabinet top or trim

• One cabinet top clip

• Always disconnect power before servicing the appliance
• Remove necessary trim or panels to access the cabinet clip; a screwdriver or trim tool may be needed
• Replace broken or worn clips with matching parts only; inspect surrounding fasteners for damage

Size: 10-24 x .50 HXNI.

This is a genuine replacement screw that secures appliance panels and small components to restore proper fit and reduce noise. Use it to replace missing or stripped fasteners for a secure, long-lasting connection. What it does:

• Fastens panels, brackets, trim, and small internal components
• Restores proper alignment to eliminate vibration or rattling
• Replaces missing or damaged screws that cause loose parts
• Helps ensure panels and assemblies stay securely mounted during operation

• Disconnect power and/or gas supply before working on the appliance
• Use the correct screwdriver or driver bit to avoid stripping the head
• Hand-start the screw, then tighten firmly but avoid over-torquing
• If threads are damaged, replace with the correct OEM screw rather than re-using

This pump sleeve housing is the replacement outer casing that supports and seals the appliance's pump assembly, helping maintain proper water flow and prevent leaks. Fits pump assemblies that use a sleeve-style housing for the impeller and seal. What it does:

• Houses the pump impeller and seals to keep water contained during operation
• Maintains correct alignment between the pump motor and impeller/sleeve
• Prevents leaks that can cause water on the floor or damage to nearby components
• Can reduce pump noise and vibration when cracked or warped housings are replaced

• Disconnect power and turn off water supply before starting any repair
• Remove access panels and disconnect the pump assembly
• Inspect adjoining seals, gaskets, and the impeller; replace any worn components for a reliable repair

Color: White.

The Switch Mounting Screw is an OEM part compatible with Whirlpool washing machines. This screw securely mounts the cycle selector switch within the control console assembly. Proper fastening ensures dependable operation of control functions.  

Causes of a bad mounting screw can stem from stress cracks developing over multiple years of operation. Vibrations accumulate, slowly loosening connections housed in a wet environment.

Symptoms of a bad mounting screw include:

• Loose or rattling switch within the console face  
• Difficulty selecting cycles as buttons wobble out of place
• Water intrusion hastening corrosion of electrical terminals
• Potential shock hazards if live connections are exposed

This Whirlpool replacement screw restores a tight mounting point. It is compatible with brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

A stabilizer bracket that secures and supports internal components to reduce movement and rattle during operation. Helps restore stable alignment so the appliance runs quieter and more reliably. What it does:

• Provides structural support to help keep assemblies aligned and reduce excessive movement
• Dampens vibration and minimizes knocking or rattling noises tied to loose components
• Restores proper fit where a worn or broken bracket allowed shifting or misalignment
• Works as a repair for symptoms like intermittent noise, excess vibration, or parts that sag or shift

• Disconnect power (and water if appliance-specific) before beginning any repair
• Basic hand tools are usually required; refer to your model's service manual for exact steps
• Inspect surrounding parts for wear while replacing the bracket

This power cord supplies electrical power to the appliance and replaces a damaged or worn cord to restore safe, consistent power delivery. The "as wrapped" packaging means the cord ships neatly coiled for protection in transit. What it does:

• Provides the appliance's main AC power connection so it can operate
• Replaces frayed, cut, or otherwise damaged cords to eliminate power loss
• Can resolve symptoms like no power, intermittent power, or visible cord damage
• Designed for direct replacement where the OEM cord mounts and terminates the same way

• Unplug the appliance or disconnect power at the breaker before servicing
• Route the cord and attach with the existing strain relief or mounting bracket
• Ensure connections match the original cord terminals and are tight

A snap-style hose clamp that secures flexible appliance hoses to fittings to help maintain a leak-free connection. Simple, durable replacement for a lost or worn hose clip to keep hoses seated and stable. What it does

• Secures a flexible hose to a nipple or barb to help prevent accidental disconnection
• Helps maintain a tight connection that reduces risk of leaks at the hose joint
• Commonly used on drain, fill, or internal circulation hoses where a small snap clamp is required
• Small, low-profile design fits in tight spaces and resists shifting under normal use

• One snap-style hose clamp

• Disconnect power and shut off water supply before beginning any repair
• Access may require removing panels or disassembling interior components depending on appliance
• Pry open or compress the clip as needed with pliers to remove and reinstall; ensure hose is fully seated on the fitting before securing
• Inspect the hose and fitting for damage; replace hose if cracked or degraded