Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Maytag Lde9206ace Parts

Best Seller
Dryer Idler Bracket Spacer
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10116756

Maintains proper spacing and alignment in your dryer's belt path. Replace if you hear squeaking or notice belt tracking issues. Verify fit with your model.

Do-It-Yourself Stories from Customers like You The motor burned up after 28 years   Robert M. • Paw Paw , MI • December 20, 2016

I replaced the motor and all other moving components along with the felt drum seals.drum glides and drive belt. The wiring instruction is where i had the most problems. Because my wiring had only 4 wires in the harness not 5, and one was a different color then the instructions call out, I believe was because it might have been and older model. the instruction called for a gray wire but mine was white with a blue piggy back wire attached. but after finding a few videos on line i figured that the... Read more

More
$34.23

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Dryer Blower Seal
Genuine Whirlpool part
By: Whirlpool
Part Number: WPY312901

Seals blower housing to prevent air leaks and lint escape. Replace when you notice lint buildup in your home or reduced drying efficiency. Confirm fit with your model number.

Do-It-Yourself Stories from Customers like You Making loud squealing sound when dryer was turned on   Michael M. • Plainfield , IL • November 19, 2018

Took the front panel off (the door front), disconnected the connector to the door switch and used a wooden clothespin to bypass the door switch. Turned on the dryer to locate loud squeaking sound and found it was coming from the motor area. When I started to take the blower section apart from the motor, that is when I saw the "blower wheel" slipped off the motor shaft. The blower wheel has a "C" clip retainer and compression ring to keep it snug on the motor shaft (but it was loose). Now I... Read more

More
$49.51

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Dryer Drum Baffle (Tall)
Genuine Whirlpool part
By: Whirlpool
Part Number: 33001004

Lifter fin that mounts inside the rotating drum to tumble laundry. Replace if cracked, broken, or missing. Installs with screws for proper load movement.

Do-It-Yourself Stories from Customers like You Baffles had stripped out where attached to drum   Robert W. • Sellersburg , IN • November 24, 2015

Replaced with new Drum Baffles Read more

More
$78.27

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Appliance Pop Rivet
Genuine Whirlpool part
By: Whirlpool
Part Number: WP210720

Pop rivet secures sheet-metal panels, brackets, and burner jar lids on appliances. Replace missing, drilled-out, or damaged rivets for permanent hold.

More
$9.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Dryer Door Strike
Genuine Whirlpool part
By: Whirlpool
Part Number: WP33001305

Door won't latch or stay closed? This dryer door strike restores proper door engagement. The striker piece catches the latch to secure your dryer door.

More
$1.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Elbow (Pipe Elbow)
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10416072

This elbow redirects a fluid or air line inside the appliance to allow routing around components and tight spaces. It restores proper flow path and helps stop leaks or blockages when the original elbow is cracked or worn. What it does:

  • Provides a sealed change of direction for a water, drain, or vent line inside the appliance
  • Replaces a cracked or broken elbow that can cause leaks, water pooling, or reduced flow
  • Re-establishes the correct routing to prevent kinks and stress on connected hoses or tubing
  • Helps eliminate intermittent draining or venting issues caused by a damaged fitting
What's included: One elbow. Install notes:
  • Disconnect power and shut off water supply before accessing the part
  • Verify orientation and routing before removing the old elbow to ensure correct reinstallation
  • Inspect and replace any worn clamps, gaskets, or hoses when installing the new elbow
  • Tighten fittings to secure but avoid over-tightening which can crack plastic components

Do-It-Yourself Stories from Customers like You Kenmore Elite dryer stopped functioning.   Bruce B. • Lone Tree , CO • November 01, 2021

I found the Appliance Parts Pros website and WOW! I am very grateful that I found the website! I called the phone number on the website and there was a woman who took my call and was extremely helpful with helping me determine an optimal course of action. She advised that I follow the video that was on the website to verify that I needed a dryer belt. This had been my assumption up until the time I had spoken with her. but I was not basing my assumption base on seeing that I needed a new dryer... Read more

More
$15.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Screw (Mounting)
Genuine Whirlpool part
By: Whirlpool
Part Number: WPY313561

A single mounting screw designed to secure panels, brackets, or components on your appliance for reliable fit and reduced vibration. Use this genuine replacement when a fastener is missing, stripped, or rusted. What it does:

  • Fastens panels, trim, or mounting brackets to restore proper alignment
  • Helps eliminate rattling or vibration caused by loose or missing screws
  • Replaces corroded or damaged hardware to maintain safe operation
  • Restores secure attachment for parts that no longer hold in place
What's included: One mounting screw Install notes:
  • Disconnect power to the appliance before starting any repair
  • Use the correct driver bit to avoid stripping the screw head
  • Tighten until snug; avoid overtightening which can strip threads or damage parts

Do-It-Yourself Stories from Customers like You 40+ year old Maytag washer quit agitating.   Marcus G. • Fresno , CA • June 11, 2022

Used Google to research issues. We ordered a new motor and springs. Installed and washer running like new. Read more

More
$9.07

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Dryer Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10116751

Single screw used to secure panels, brackets, and internal components to the dryer frame. Replaces lost, stripped, or damaged fasteners during repairs.

Do-It-Yourself Stories from Customers like You Drum belt broke   Gerald N. • Venice , FL • May 10, 2016

At first i just bought the belt, started dryer and off came the belt, and yes it was in place,looking at the idler arm it had a lot off back and forth movement so i ordered the whole assembly but the spring which no one has.put it all together again but drum barely turned.. so back apart and belt was in place. took the idler spring out cut 4 loops off it re did the end so it would hook on idler arm.and that did the trick.runs like new. Read more

More
$7.56

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: 213007

Spesc: #12 pozi - drive

More
$11.50

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Dryer Exhaust Duct Transition
Genuine Deflecto part
By: Deflecto
Part Number: DAF3

Exhaust duct transition for dryer venting systems. Replaces cracked, damaged, or missing oval-to-round duct adapters. Essential for proper airflow.

More
$38.35

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Wire Retainer
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22003298

 

More
$8.69

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: Y314062

 

More
$16.10

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Screw (Fastener)
Genuine Whirlpool part
By: Whirlpool
Part Number: 22003781

A replacement mounting screw used to secure appliance panels and components. This genuine-style fastener restores proper fit and prevents loose or rattling parts for many Whirlpool appliances. What it does:

  • Fastens panels, trim, brackets, or components to the appliance frame
  • Restores secure attachment when original screw is missing, stripped, or damaged
  • Helps eliminate rattling, vibration noise, and loose-fitting parts
  • Matches OEM fit and function when the correct part number is used
What's included: One screw. Install notes:
  • Disconnect power (and water, if applicable) before servicing the appliance.
  • Use the correct screwdriver or driver bit to avoid stripping the head; do not overtighten.
  • Replace only with the exact part number to ensure correct fit; keep removed hardware organized for reassembly.

More
$14.14

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Main Wire Harness
Genuine Whirlpool part
By: Whirlpool
Part Number: 33001626

 

More
$45.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Dryer Venting Pipe
Genuine Whirlpool part
By: Whirlpool
Part Number: Y059130

Venting pipe for dryer exhaust system. Connects dryer to external vent. Replace if cracked, damaged, or deteriorated to maintain proper airflow.

More
$15.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Best Seller
Lint Filter
Genuine Whirlpool part
By: Whirlpool
Part Number: WP33002970

The Lint Filter is an OEM part for Whirlpool dryers. It is designed to capture lint and debris that are produced during the drying cycle, preventing them from entering the dryer’s internal components and reducing the risk of fire hazards. This filter measures approximately 13 inches wide by 9 inches high. 

Over time, the lint filter can become clogged with lint, get damaged, or develop holes that reduce its effectiveness. Regular cleaning is necessary to maintain its performance, but eventually, it may need replacement to ensure optimal dryer operation.

Symptoms of a bad lint filter include:

  • Reduced drying efficiency
  • Longer drying times
  • Excessive lint on clothing
  • Visible damage or holes in the filter

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms
  • Takes too long to dry
See more...
Do-It-Yourself Stories from Customers like You Broken belt on a Maytag lde8604ace dryer.   Anthony B. • Lake Jackson , TX • April 27, 2020

Buy only an EOM Whirlpool belt (also fits this Maytag model) At your electrical service panel, move your dryer’s breaker(s) to their off position(s). Unplug the dryer. This project was quite easy once I figured out the best way to install the new belt. Two phillips head screws at the bottom of the front panel are all that need to be removed to remove the front panel and door. Lift from the bottom out about 45 degrees and the front will come off. Unplug the one wire that will be hindering... Read more

More
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google