Maytag Pdb4600awe Parts

Ordered the new o-rings for the pump housing and main filter screen unit. Cleaned all water hardness and other debris out of all parts. Main filter and inside parts clogged with water hardness/limescale and other debris. The 3" wide round filter internal was completely clogged with debris and some of the filter holes we crystallized with water limescale. The pump was in good shape but all the filters and parts just needed to be cleaned. Some useful tips on this Magtag Jet Clean... Read more

Replaced the water injector and seal. Read more

Removed dishwasher to replace spray arm pine--I replaced washer on pipe, too, and would recommend doing this just on principal. Removing dishwasher requires disconnecting power, water, and drain line--tools will vary depending on connections. i replaced drain line because original install was not done correctly--hose too short--You could probably do just this w/o pulling unit. All parts arrived very quickly and fit correctly. Read more

Ordered the new o-rings for the pump housing and main filter screen unit. Cleaned all water hardness and other debris out of all parts. Main filter and inside parts clogged with water hardness/limescale and other debris. The 3" wide round filter internal was completely clogged with debris and some of the filter holes we crystallized with water limescale. The pump was in good shape but all the filters and parts just needed to be cleaned. Some useful tips on this Magtag Jet Clean... Read more

My son fixed it. Problem was one of the spinner pieces had worked itself loose and jammed the large arm from freely spinning. Read more

Removed dishwasher to replace spray arm pine--I replaced washer on pipe, too, and would recommend doing this just on principal. Removing dishwasher requires disconnecting power, water, and drain line--tools will vary depending on connections. i replaced drain line because original install was not done correctly--hose too short--You could probably do just this w/o pulling unit. All parts arrived very quickly and fit correctly. Read more

Removed 8 screws that retain inner door to outer door. Removed rinse aid dispenser nut and replaced O-ring around dispenser. Also, removed 2 screws that retain the latch assembly and replaced rubber grommet around latch lever that retains soap dispenser door. Read more

Lower spray bar had what looked like spaghettis blocking & protruding from holes on top. Upon further inspection found to be some type of fiber. Further, inspection revealed fiber came from rinse arm. Ordered a new spray bar from you, arrived in three days. Clean all including filters/spray bar put all back together ran like new. The time listed below includes troubleshooting and a little head-scratching. Read more

Replaced PC board. Easy to remove old board and install the replacement. It doesn't get much easier than this. Read more

• Not drying dishes properly