Mcbr360s Parts

This freezer door seal replaces a worn or damaged gasket to restore an airtight seal and help the compartment hold cold temperatures. It's a direct-fit replacement when matched to the correct part number. What it does:

• Seals the freezer door to prevent warm air infiltration and reduce frost buildup
• Helps maintain consistent internal temperatures for food safety
• Reduces compressor runtime caused by air leaks
• Addresses symptoms like visible gaps, torn or brittle material, and excessive ice/frost

• One freezer door seal (gasket)

• Remove the old gasket and fully clean the mounting channel before installing the new seal
• Seat the new gasket evenly around the door; allow adhesive or fasteners to set if applicable
• Inspect for full contact around the perimeter and adjust as needed for a uniform seal

A direct-replacement thermostat knob that restores a solid, easy-to-use control interface so you can select temperature settings by hand. Fits the factory control shaft and replaces a missing, cracked or worn knob. What it does

• Replaces a damaged or missing thermostat/control knob so you can adjust temperature settings.
• Slides onto the control shaft and provides a tactile grip for turning the thermostat.
• Helps stop slipping or loose control action caused by worn or broken knobs.
• Useful when the original knob is cracked, stripped, or hard to turn.

• Always disconnect power to the appliance before servicing.
• Pull the old knob straight off the control shaft; align splines and push the new knob fully onto the shaft.
• Do not force or rotate the shaft while installing; ensure the knob indexes to the correct setting position.

This PTC starter is a thermistor-based compressor start device that helps the refrigerator compressor start reliably, reducing hard starts and improving overall cooling performance when the start circuit is functioning correctly. What it does:

• Provides a timed boost to the compressor start winding using a positive temperature coefficient (PTC) thermistor
• Helps prevent compressor hard starts, humming, or failure to start
• Senses temperature change in the start circuit to cut out the start assist once the compressor is running
• Commonly used in single-phase refrigeration compressors with a PTC-style start circuit

• Disconnect power to the appliance before servicing to avoid electrical shock
• Handle terminals gently and ensure secure, corrosion-free connections

This thermostat regulates oven temperature to maintain consistent cooking heat. It replaces a failed temperature control that causes incorrect baking or uneven cooking. What it does:

• Senses oven temperature and signals the heating system to turn on or off
• Helps restore accurate temperature control when the oven runs too hot or too cold
• Commonly used when oven cycles irregularly or displays temperature-related cooking problems
• Works as the control sensor for maintaining set cooking temperatures

• One thermostat assembly

• Turn power to the appliance off at the breaker before starting work
• Mounting and connector locations vary by model; verify fit before final installation

A PTC starter that helps engage a compressor's start winding for reliable motor startup and shorter run-up. Use this direct-replacement thermistor when the compressor struggles to start or only hums instead of running. What it does:

• Provides a timed reduction in start-circuit resistance so the compressor motor can start smoothly.
• Helps prevent continuous start winding current after the compressor runs, protecting the motor.
• Common symptom fixes: compressor hums, won't start, or system cycles without cooling.
• Works as the electrical start device used in many refrigeration and small motor applications.

• One PTC starter (single thermistor start device).

• Disconnect all power before attempting replacement; risk of shock or equipment damage.
• Match the starter to the original part and wiring; replace only with the correct part number.
• Handle terminals carefully; do not short or bend leads.
• This is a non-serviceable component — replace rather than attempt repairs.

A small trim piece that snaps over a door hinge to protect the hinge mechanism and restore a finished look. Replaces a cracked, broken or missing hinge cover to keep the hinge area clean and snag-free. What it does:

• Covers and protects exposed hinge hardware from dust and debris
• Restores a smooth, finished appearance to the door edge
• Helps prevent clothing or towels from catching on the hinge area
• Useful when the original cover is cracked, broken or missing

• One hinge cover

• Remove the door or support it per the appliance manufacturer's instructions before replacing the cover
• Snap the cover into place over the hinge; do not force or pry to avoid damaging the trim
• Wear gloves to protect your hands from sharp edges and keep fingers clear of the hinge

This replacement freezer door restores the compartment barrier that helps keep frozen items cold and protected. It replaces a damaged or dented door to maintain proper sealing and consistent freezer performance. What it does:

• Replaces a worn, dented, or cracked freezer door to restore a proper enclosure
• Helps maintain stable freezer temperatures by supporting the door seal
• Reduces air leakage that can cause frost buildup or inconsistent cooling
• Returns the compartment to normal operation after door damage

• Disconnect power to the appliance before starting any repair
• Remove door trim, handles, and hinge fasteners as needed; retain all hardware
• Align door and gasket carefully so the seal contacts evenly; test close/open operation before restoring power

This hinge axle is the replacement hinge pin that supports and aligns a refrigerator/freezer door, restoring smooth opening and proper door seating. Use it to fix a sagging, noisy, or misaligned door hinge. What it does:

• Serves as the pivot pin for the door hinge, allowing the door to swing smoothly
• Restores proper door alignment to improve sealing and closing
• Stops squeaks or binding caused by a worn or broken hinge pin
• Helps prevent further wear to hinge assemblies when installed correctly

• One hinge axle as shown

• Disconnect power and empty or support the door before removing the hinge assembly
• Use appropriate tools to remove hinge screws and carefully lower or support the door while replacing the pin
• Inspect hinge bracket and bushings for wear; replace any damaged components for best results