Mdb4949sdh Parts

This replacement name plate restores the appliance's identification label so model and serial information is legible and the exterior looks complete. It's a simple cosmetic and identification part that helps owners read key appliance info. What it does

• Replaces a faded, damaged, or missing identification label
• Restores readable model/serial/manufacturer details for service and registration
• Improves cosmetic appearance where the original label is worn or peeled
• Helps prevent confusion when ordering parts or scheduling repairs

• One replacement name plate

• Clean and dry the mounting surface thoroughly before installing
• Align carefully and press firmly if adhesive-backed; use the original fasteners if applicable
• Handle by the edges to avoid transferring oils or smudges to the label

This replacement UI housing is the outer shell that holds and protects the appliance's user interface and control components. Replacing a cracked or damaged housing restores a secure mounting for buttons and helps keep controls free from dirt and moisture. What it does:

• Provides a secure mounting surface for the control board, buttons, and display
• Protects internal electronics from dust, spills, and everyday wear
• Restores proper alignment of buttons, knobs, and touch controls when the original housing is warped or cracked
• Helps eliminate rattles or loose-feeling controls caused by a broken console housing

• Disconnect power to the appliance before starting any work
• Remove any trim pieces or screws securing the console; handle plastic tabs carefully to avoid breakage
• Transfer controls, brackets, and fasteners from the old housing as needed — only the housing is included
• If you see damaged wiring or components, replace those parts separately; do not attempt repairs with power connected

This support mounting bracket secures and aligns internal components to keep assemblies stable and operating smoothly. It helps prevent part movement that can cause noise, misalignment, or improper panel fit. What it does:

• Stabilizes and supports adjacent components or panels to reduce vibration and rattling
• Keeps doors or internal assemblies aligned for correct operation
• Prevents shifting that can lead to intermittent contact or wear
• Helps maintain proper spacing where a fixed mount is required

• Disconnect power or unplug the appliance before beginning work
• Handle sharp edges carefully and use the proper screwdriver or nut driver
• Reuse existing fasteners only if they are in good condition; replace stripped or damaged hardware

This push-in retainer secures panels, trim or light-weight components inside the appliance to prevent vibration and movement during operation. It's a small, low-profile fastener that snaps into a pre-drilled hole for a clean, tool-free hold. What it does:

• Holds interior trim, access panels or wiring looms in place to reduce rattles and movement
• Replaces worn or broken plastic retainers that no longer grip securely
• Helps maintain proper alignment of lightweight components for reliable operation
• Can prevent loose parts from contacting moving components

• Disconnect power to the appliance before starting any work
• Access the area and remove any surrounding trim or panels as needed
• Align retainer with the hole and push straight in until it snaps or seats flush
• Inspect fit after installation; replace if damaged or does not secure properly

This replacement wire harness routes power and control signals between the appliance's electrical components to restore proper electrical connections and reliable operation. Use it to replace a damaged or worn wiring assembly. What it does:

• Connects control board, motors, sensors and/or switches to provide power and signal paths
• Restores lost or intermittent electrical connections caused by frayed, burnt, or broken wires
• Helps eliminate symptoms such as no-start, intermittent operation, or dead circuits to specific components
• Maintains proper routing and connector fit to prevent shorting or chafing

• Disconnect power (unplug or shut off breaker) before starting any repair
• Compare connectors and wire colors to the original harness to ensure correct replacement
• Route harness away from sharp edges, moving parts and high-heat areas; secure with clips or ties as originally arranged

This spacer positions and supports the appliance tank/tub assembly to maintain proper alignment and spacing for reliable operation. Replaces a worn or damaged spacer to restore correct fit and reduce movement. What it does:

• Keeps the tank/tub assembly correctly spaced and aligned with the cabinet and mounting points
• Helps prevent rubbing, binding, and excess vibration caused by a missing or damaged spacer
• Restores proper clearance to support seals and hoses that rely on correct tank positioning
• Useful when reassembling the appliance after service or repair

• One spacer

• Disconnect power and water supply before starting any repair
• Access may require removal of outer panels, console, or access covers depending on model
• Handle parts carefully to avoid damaging surrounding seals and wiring; reuse fasteners unless replacement is specified

This control bracket secures the console or control housing to the appliance, keeping the control panel stable and properly aligned for reliable operation. Replaces a damaged or missing bracket to restore secure mounting and prevent panel movement. What it does:

• Mounts the control console to the appliance frame to prevent wobbling or sagging
• Keeps control buttons and switches aligned for consistent user operation
• Helps stop rattling or vibration noise caused by a loose control housing
• Supports wiring and components behind the console to reduce strain on connectors

• Always unplug the appliance or disconnect power before beginning service
• Remove the console or access panel per service instructions to reach mounting points
• Use appropriate screwdrivers or nut drivers; keep original hardware unless damaged
• Align bracket and tighten screws evenly; avoid overtightening to prevent stripping

Color: White

The Door Hinge (RH) is an OEM replacement part for Whirlpool dishwashers. This hinge is installed on the right-hand side of the dishwasher door, allowing it to open and close smoothly while maintaining the proper tension and alignment. The hinge plays a crucial role in ensuring the door seals securely during operation, preventing leaks and enabling efficient cleaning performance.

Common causes include regular use leading to wear and tear, accidental impacts, or exposure to moisture, which can contribute to rust or corrosion.

Symptoms of a bad door hinge include:

• The dishwasher door not closing completely
• Difficulty opening or closing the door
• A sagging or misaligned door
• Unusual noises when moving the door

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Replace a damaged rack and restore smooth loading with this dishrack. It securely holds dishes and cookware during the cycle, helping prevent tipping and flaking rust from worn coating so items stay stable and protected.

• Supports and organizes dishes, bowls, cups, and cookware throughout wash and rinse cycles
• Slides on the rails for easy loading and unloading
• Helps keep items upright to maintain spray coverage and prevent shifting
• Replace if you see rusting/coating loss, broken or missing tines, bent frame, or the rack no longer moves smoothly

• Disconnect power and water to the dishwasher before servicing
• Pull the rack fully out; release rail end caps or stops if present, then remove the old rack
• Transfer any reusable parts (rollers, clips, baskets, or tines) from the old rack to the new rack
• Seat the new rack on the rails and verify smooth travel before use

This dishwasher circulation pump and motor assembly drives wash water through the spray arms at the proper pressure. Replacing a worn or noisy unit restores strong water movement and consistent cleaning during the wash and rinse cycles. What it does:

• Circulates water through the spray arms during wash and rinse cycles
• Maintains wash pressure and flow for effective cleaning performance
• Direct replacement for a seized, leaking, or excessively loud wash pump motor
• Typical symptoms: poor cleaning results, spray arms not turning, little/no water movement, grinding or humming during wash

• One circulation pump and motor assembly

• Disconnect power and shut off water supply before service; allow the dishwasher to cool
• Access is typically from the bottom; remove the toe panel and pull the unit forward as needed; place a towel to catch residual water
• Note wiring and hose orientations; release locking tabs/clamps to remove the old pump
• Ensure the new pump seats and locks fully into the sump; reconnect hoses/wiring and test for leaks and proper spray operation

This replacement cover protects internal appliance components and helps keep lint, dust and debris out of critical areas for safer, more reliable operation. It restores a secure enclosure when the original cover is cracked, loose or missing. What it does:

• Shields internal parts and wiring from debris and accidental contact
• Helps reduce lint buildup and related airflow or overheating issues
• Restores proper fit and reduces vibration or rattling from a loose opening
• Commonly replaced when the existing cover is cracked, broken or missing

• Disconnect power (and water, if applicable) before beginning any repair.
• Verify orientation and snap or screw locations before securing the cover.
• Use appropriate fasteners and do not overtighten to avoid cracking the part.
• Inspect and repair those components before reinstalling the cover.

This support bracket helps hold internal components in place to restore proper alignment and reduce movement. It's a simple replacement that stabilizes the affected assembly and helps stop rattling or sagging. What it does:

• Secures and supports a loose or misaligned internal component or panel
• Prevents shifting that can cause vibration, noise, or uneven operation
• Restores proper alignment to reduce wear on adjoining parts
• Functions as the OEM replacement for the original support bracket

• One support bracket

• Inspect the mounting points and surrounding parts for wear before installing
• Replace only with the matching OEM part number to ensure fit; fasten securely per manufacturer torque recommendations
• Disconnect power and follow basic safety precautions before servicing the appliance