Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
No longer includes course threaded sleeve. When replacing upgrade to new motor. For new motor, order from parts list by model number.
Searched the dishwasher model on ApplianceParts (had used them for a washing machine repair a few years earlier). Was looking for an exploded diagram of the internal parts so I could figure out what might be the problem. There was a video for a motor seal repair kit that seemed to address the bearings which is what I suspected was the culprit. The video started by noting that "you want to replace the motor seal if 1) you have a leak or 2) your dishwasher is making a noise". I watched the... Read more
Color white. The wash arm measures about 11 inches, and the retainer about 3 inches.
Spun each of the three wash arms by hand. All could be made to touch/scrape but the top one was super wabbly. Ordered both the arm and clip. Repair took less than a minute. Used a screwdriver to pry loose one side of the old clip to remove. Aligned the new parts and easily snapped into place. Read more
Ordered the part. Arrived the next day. Took the eleven screws off the door exposing the back of the Soap/Rinse Aid dispenser. Six screws hold it on the inside of the door. Popped off easily. There is a plug that runs from the timer to the dispenser…it's a pain to get off. Use a flat head screw driver. Screwed the new unit in place. Plugged it in. Put the door back together. I accidentally caught the door catch in the door and screwed it together seizing it...so I had to take the top screws off... Read more
Kit includes more than shown on picture. New kit is for both plastic and stainless tubs. Plastic tubs use only the float and the switch stainless tubs use all the parts.
I replaced the float switch. It was an easy enough repair. I didn't have to remove the dishwasher to do the work. The part is accessible from behind the front skirt.The only problem was there is not a lot of space to work in. Getting the fastener off and on requires a stubby nut driver. I used a flexible extension instead. I had to feel for the nut as the bottom of the door blocked my view. A ten minute job and the dishwasher is back in service (for half the cost of my local parts place) While... Read more
Replaced pump and filter. Read more
Early last year our dishwasher stopped running, and we did things the old fashioned way by standing in front of the sink ourselves. When Thanksgiving and Christmas came back to back with extended family in the home my wife said that she wanted her dishwasher back. After doing some reading and some simple diagnostic stuff, I contacted one of your staff through Chat, affirmed a few things, and ordered the right Control Board. The installation literally took less than 10 minutes, but my wife was... Read more
This dishwasher door seal is used on some Amana, Maytag, Magic Chef, Crosley, Samsung, Admiral and Jennair dishwashers.
Removed old gasket. Installed new gasket. Read more
Replaced dishwasher door latch assembly. Read more
Tested starter capacitor at 2.16µF. pic: http://s29.postimg.org/e05fufxdz/IMG_20150716_140312.jpg It should be 15µF. pic: http://s29.postimg.org/x3yrasa87/IMG_20150718_112327.jpg Contrary to service manual, capacitor is not accessible behind the toe/kick-plate; it is underneath but all the way towards the rear. To get to it, the dishwasher has to be removed and positioned face-down (drain first, use towels/drop-cloth). Read more
Ordered a new cover and installed it with no problems Read more
Replaced the part. I have a lot of practice at this now. I'll never buy another Maytag product. Read more
Seal not included