Mdbh 969Fwb1 Parts

This left corner trim restores the finished edge on a refrigerator door or cabinet frame, improving appearance and helping protect the gasket area from damage. It's a direct-fit plastic trim piece used where the door meets the cabinet. What it does:

• Covers and protects the door/frame corner to prevent chipping and wear
• Helps maintain a smooth seal surface by securing the gasket edge
• Reduces visible gaps or rough edges that cause cosmetic issues
• Commonly replaced when cracked, broken, or missing after impact or wear

• One left corner trim piece

• Unplug the appliance or disconnect power before beginning work when applicable
• Remove any adjacent trim or fasteners gently to access the mounting area
• Align the trim with the corner and press or fasten per the OEM attachment points
• Avoid forcing the piece; inspect surrounding gasket and mounting clips and replace if damaged

Color: Gray. Measures about a 1/2 inch wide by 1 inch high by 1 inch deep.

This control panel is the user-facing console assembly that houses buttons, touch controls and the display, letting you select cycles and monitor oven status. Replaces a worn, cracked, or unresponsive console to restore normal control operation. What it does:

• Provides the front-facing buttons/touch keys and display used to start and adjust cooking cycles
• Relays user commands to the oven control board for cycle selection and timer functions
• Commonly replaced for symptoms such as unresponsive keys, missing or dim display, or cracked/damaged console
• Interfaces with the main control; does not include internal control electronics

• Disconnect power to the appliance at the breaker before starting any repair
• Replacement typically requires removing the oven door or trim and unscrewing the old panel; keep screws and brackets for reassembly
• Handle the display and ribbon/connectors carefully to avoid damage; verify connector seating before restoring power
• If other control symptoms persist after replacement, test the main control board and wiring harness for faults

This motor-pump assembly replaces the washer's drain pump to restore reliable water removal and reduce leaks. It mounts to the tub and handles draining so your cycle can finish and clothes can spin out properly. What it does:

• Pumps water out of the washer during drain cycles to allow proper spin and cycle completion
• Helps prevent standing water and reduces the chance of overflow or tub leaks
• Stops humming, grinding, or no-drain symptoms caused by a failed pump motor
• Works as the integrated motor and pump unit that attaches to the washer tub

• Disconnect power and water before servicing; follow all safety precautions
• Basic hand tools required; access may require removing front or rear service panel
• Inspect and reinstall hoses and clamps securely to prevent leaks

This control panel is the front user interface that houses the oven/dryer's buttons and display, letting you select cycles and settings for normal operation. It restores responsive controls and visible feedback for accurate appliance use. What it does

• Provides the main control surface and display for selecting functions and cycle options
• Translates button presses into electronic signals for the appliance control system
• Common symptoms it addresses: unresponsive buttons, non-working or dim display, or intermittent control behavior
• Works with the appliance's control electronics to show status and error indicators

• Disconnect power to the appliance before starting any work to avoid shock
• Remove outer console/trim per service manual to access and replace the panel
• Handle the assembly carefully to avoid damage to the display, keypad, or circuit board

This replacement lever operates the overflow/level switch assembly to help the washer detect and respond to water level changes. It restores the mechanical action that tells the control when the tub is full. What it does:

• Moves the overflow/level switch mechanism so the machine can sense water level correctly
• Helps address overfilling, continuous filling, or erratic fill behavior caused by a worn or broken lever
• Restores reliable engagement between the float/actuator and the switch
• Works as the mechanical linkage for the overflow/level sensing assembly

• Disconnect power and turn off the water supply before beginning service.
• Access typically requires removing the cabinet or control console; keep fasteners organized.
• Install the lever so it aligns with the switch actuator and float linkage; verify smooth movement after assembly.

This roller fits the cable bracket assembly and helps guide the cable smoothly to reduce binding and wear. It restores proper cable tracking so the mechanism moves more quietly and reliably. What it does:

• Guides and supports the cable within the bracket so the cable runs true
• Reduces rubbing, binding, and premature cable wear
• Helps eliminate squeaks or grinding where the cable contacts the bracket
• Restores smoother operation of the affected door/assembly movement

• One roller for the cable bracket (quantity: 1)

• Disconnect power before starting any repair and follow all safety guidelines
• Requires basic hand tools; access the bracket per your model's service instructions
• Inspect the cable and bracket for wear or damage and replace if necessary
• Test operation after installation to ensure proper cable routing and smooth movement

A replacement leveling leg that stabilizes your appliance and allows height adjustment for a secure, level install. Restores proper alignment to reduce rocking, vibration and uneven door gaps. What it does:

• Raises and levels the appliance so all feet contact the floor evenly.
• Stops rocking and excessive vibration that can cause noise or wear.
• Helps restore proper drainage and door alignment by correcting tilt.
• Matches original fit and function for reliable support.

• Disconnect power (and water for appliances with plumbing) before servicing.
• Raise or support the appliance safely before removing or adjusting legs.
• Turn the leg to raise or lower; make small adjustments and recheck level.
• Use common hand tools (wrench or pliers) and avoid forcing damaged threads.

This electronic control board manages a range of appliance functions, restoring responsive cycle selection, timing and control logic for machines that have lost normal control operation. Replace a failed board to regain normal electronic control. What it does:

• Receives user inputs and runs the appliance's selected cycles and timing
• Controls power to motors, heaters and other components via relays and triacs
• Helps prevent improper operation when the board detects faults (may show error codes)
• Common symptom for replacement: unresponsive touchpad/control panel or no cycle start
• Other symptoms: erratic or incorrect cycle behavior, display errors, or appliance not powering on

• One electronic control board

• Disconnect power to the appliance before starting any repair
• Handle the board carefully and avoid touching circuit components to prevent ESD damage
• Reconnect all wiring harnesses and mounting hardware exactly as removed; ensure connectors are fully seated

This toe-panel insulation replaces the foam liner behind the appliance toe kick to help maintain cabinet insulation and reduce drafts. It restores proper airflow and thermal protection under the unit for more consistent operation. What it does:

• Provides thermal insulation for the cabinet base to help reduce heat loss and drafts
• Helps maintain proper airflow around the compressor and components beneath the appliance
• Can reduce the likelihood of cold floors or localized temperature changes near the toe kick
• Restores damaged or missing insulation that may affect efficiency or appliance comfort

• Disconnect power to the appliance before beginning service
• Remove the toe kick/grille and old insulation to access the cavity; handle metal edges with care
• Trim or fit the new insulation as needed for a snug placement; use OEM fasteners if originally present

This dispenser cover (shield) replaces the plastic trim that surrounds a refrigerator's dispenser opening, restoring a clean finished look and helping direct water or ice into your cup. Fits where the dispenser meets the cabinet face. What it does:

• Covers and protects the dispenser opening, preventing chips and cosmetic damage
• Helps guide water and ice into cups for more accurate dispensing
• Hides internal dispenser components for a finished appearance
• Can reduce direct contact with moving dispenser parts

• One dispenser cover (shield)

• Remove power to the appliance before servicing to avoid electrical or injury risk
• Typically installs by snapping into place or fastening with a few screws; keep hardware if reusing
• Inspect surrounding trim for damage and replace any broken clips or screws for a secure fit

This flexible injector hose routes liquid between the appliance's injector/dispenser and the pump or spray assembly, restoring proper dispensing and preventing leaks. It's a direct-replacement service part for affected injector connections. What it does

• Carries water or detergent solution from the injector/dispenser to the pump or spray assembly
• Restores normal dispensing when the original hose is cracked, split, or clogged
• Prevents leaks that can cause puddling or improper wash cycles
• Helps restore consistent flow so detergent and rinse/cleaning agents reach the tub

• One injector hose

• Disconnect power and shut off the water supply before starting
• Remove the old hose and reuse or replace any clamps or fittings as needed; install the new hose onto the same connection points
• After installation, restore power/water and run a short cycle to check for leaks and correct dispensing

This ball bearing helps support a rotating appliance assembly to reduce friction and enable smooth operation. Replacing a worn bearing restores quieter rotation and helps prevent further wear on adjoining parts. What it does:

• Supports and centers a rotating shaft or drum to maintain smooth movement
• Reduces friction between moving metal components for efficient operation
• Can cause squealing, grinding, rubbing or excessive vibration when worn
• Restoring the bearing can stop noise and improve rotation stability

• Disconnect power and follow before beginning any repair
• Use correct tools and replacement procedures to avoid damage to the bearing housing or shaft
• Inspect adjacent seals, shafts, and mounts when replacing the bearing and replace any damaged parts

This loose bag assembly is a direct-fit replacement designed to restore the original containment or collection function in compatible Whirlpool appliances. It provides a simple swap to fix a damaged or missing bag and keep the appliance operating as intended. What it does:

• Replaces a worn, torn, or missing bag used for containment or collection in the appliance
• Restores proper collection and helps prevent debris or material from escaping into the appliance cavity
• Helps reduce related performance issues that occur when the bag is damaged or absent
• Matches OEM form and fit for an easy, reliable replacement

• One loose bag assembly as shown

• Turn off and unplug the appliance before attempting replacement
• Remove any panels or components required to access the bag
• Install the bag in the correct orientation and secure all fasteners or clips
• Inspect surrounding seals and openings; replace any damaged parts to ensure proper operation

Includes 6` Stainless Steel Braided Hose, Power cord & Connectors