Med5500fw Parts

This nozzle body assembly directs wash water through the dishwasher's spray system to help deliver thorough cleaning. It replaces a damaged or clogged nozzle body to restore proper water flow and spray coverage. What it does:

• Channels water from the wash arm to the spray nozzles for even distribution
• Helps eliminate weak sprays or uneven cleaning caused by cracked or clogged nozzle housings
• Works as the structural mount for the nozzle(s) in the spray arm assembly
• Fits into the dishwasher spray system and interfaces with existing wash-arm components

• One nozzle body assembly as shown

• Recommended for installation by someone comfortable with basic dishwasher disassembly
• Disconnect power and water supply before beginning work to avoid shock or flooding
• Inspect adjacent seals, spray arms, and clips during replacement and clean any debris
• Use only the exact replacement part number for fit; do not force or modify parts

This multi-vent plug seals an unused vent opening to stop unwanted airflow and keep the appliance interior protected. It's a direct-fit replacement designed to restore proper venting and help prevent drafts, debris, and pests. What it does:

• Plugs an unused multi-vent opening to prevent air leakage and drafts
• Helps keep dust, lint, and small debris out of the appliance vent path
• Reduces the chance of pest entry through an open vent
• Restores the intended vent configuration after service or part removal

• Disconnect power or gas to the appliance before servicing for safety
• Install by aligning and pressing the plug firmly into the vent opening until seated
• Do not force if resistance is excessive; inspect for obstructions or damage
• Replace damaged parts before installing the plug

This replacement cover is a cabinet access panel that protects internal components and restores a finished appearance. It keeps components shielded from dust and debris while helping maintain safe, stable operation of the appliance. What it does:

• Shields internal parts and wiring from debris, spills, and accidental contact
• Restores the appliance's exterior finish and maintains proper panel alignment
• Helps reduce noise and vibration by securing the cabinet opening
• Commonly replaced when the panel is cracked, bent, missing, or loose

• One cover

• Disconnect power to the appliance before beginning any work
• Removal/installation typically requires basic hand tools; handle part carefully to avoid scratches
• Follow the manufacturer's service instructions for correct fitment and fastener torque
• If you see damaged clips or fasteners, replace them as needed to ensure a secure fit

The Harns-Wire is an OEM part for Whirlpool electric and gas dryers. It is an assembly of wires and connectors that link internal dryer components together, allowing signals and power to flow properly through the system. 

Causes of a bad harness can include wire insulation cracking from dryer drum movement, severed conductors leading to power loss in certain circuits, or broken connectors interfering with components like motors or sensors.

Symptoms of a bad harness include:

• Inability to start or stop cycles automatically  
• Temperature fluctuations resulting in uneven drying
• Unexpected stops or failure to tumble clothes smoothly
• Activation of safety cutouts or circuit breakers

 This harness is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dryers. 

This complete door assembly replaces a damaged or worn oven door to restore proper sealing and safe operation. It provides the outer structure and handle interface needed for opening, closing, and maintaining internal temperatures. What it does

• Replaces a broken, dented, or warped door to help restore proper closure and heat retention.
• Restores a secure latch and alignment so the appliance opens and closes smoothly.
• Reduces heat loss and helps prevent uneven cooking caused by a poor seal.
• Helps eliminate rattling or vibration from a loose or damaged door.

• High-level replacement; handle the glass and edges carefully to avoid cuts or breakage.
• Disconnect power (and gas supply for gas appliances) before removing the old door.
• Follow manufacturer instructions for door removal and reinstallation; two people may be required for safe handling.
• If the door includes glass or internal clips, inspect for secure seating and tightened fasteners after installation.

This terminal block cover protects the dryer/range terminal block and wiring by keeping connections enclosed and reducing risk of accidental contact or debris intrusion. It restores a finished, safe rear electrical access area. What it does:

• Covers and shields the appliance's electrical terminal block to help prevent accidental contact with live wires
• Helps keep dust, lint and small debris out of the terminal area
• Provides a mounting surface for the terminal block screw or clamp where applicable
• Common service symptom: missing, cracked or damaged cover exposes wiring or looks broken at the rear access

• One terminal block cover

• Disconnect all power at the breaker or unplug the appliance before servicing
• Intended to mount over the terminal block; secure with the factory screw(s) or fastener(s)
• Inspect wiring and terminal connections while the cover is off; replace frayed or damaged wires before reinstalling

This exhaust pipe channels hot, moist air from the appliance to the vent system, helping maintain proper airflow and reduce moisture buildup. It's a direct-replacement service part used when the original pipe is damaged or leaking. What it does:

• Directs exhaust air from the appliance into the household venting system
• Helps prevent backflow and reduces moisture or lint escape into the cabinet area
• Restores proper airflow when a cracked, bent, or corroded pipe impairs venting
• Works as part of the dryer/vent assembly to support safe, efficient operation

• One exhaust pipe

• Disconnect power (and gas, if applicable) before starting any repair
• Handle edges carefully; wear gloves to avoid cuts and eye protection if debris is present
• Use proper clamps or fasteners and ensure all seals are secure to prevent leaks

A duct collar that connects and secures the dryer's exhaust duct to the appliance, helping channel hot, moist air safely out of the dryer. Replaces a damaged or loose collar to restore a tight vent connection. What it does

• Provides a secure connection point between the dryer and the exhaust duct to help direct airflow out of the appliance.
• Helps reduce vent leaks that can cause poor drying performance or excess lint buildup in the cabinet/closet.
• Restores proper duct alignment to reduce rattling or vibration from a loose duct connection.
• Used when the existing collar is cracked, bent, corroded, or no longer holds the duct firmly.

• One duct collar.

• Always disconnect electrical power before servicing the dryer.
• Clean lint from the vent path before installing the new collar to ensure good airflow and reduce fire risk.
• Installation typically requires basic hand tools and a clamp or screws to secure the duct; follow the dryer's service instructions.

A small replacement retainer clip that secures interior panels and trim to restore proper fit and reduce vibration or rattling. Fits where a molded or snap-in fastener has worn or broken. What it does

• Secures panels, trim pieces, or wiring harnesses so parts sit flush and stable.
• Prevents rattling and vibration caused by loose or missing fasteners.
• Helps keep seals and gaskets aligned by holding adjacent trim in place.
• Common symptom: loose trim, gaps, or intermittent rattling sound during operation.

• The clip shown.

• Disconnect power (unplug appliance or turn off breaker) before servicing.
• Access the clip location by removing the appropriate trim or panel.
• Clip typically snaps into a mounting hole or slot; align and press until it seats securely.
• Use basic hand tools as needed; wear gloves and eye protection to avoid injury from sharp edges.

This retainer is a small mounting clip that secures internal appliance components, keeping parts aligned and preventing vibration or rattling. Replacing a worn or broken retainer restores proper fit and helps reduce noise and movement. What it does:

• Secures a specific internal component to its mounting point to maintain proper alignment
• Keeps parts from shifting or vibrating during operation
• Helps prevent intermittent noise caused by loose fittings
• Supports reliable operation by holding components in the correct position

• One retainer clip

• Disconnect power to the appliance before beginning any work
• Inspect the surrounding mounting area and matching mating tabs for damage before installing
• Install the retainer by aligning it to the mating slots and snapping or fastening it into place; use gentle pressure to avoid breakage
• If other mounting hardware or adjacent parts are damaged, replace them as well for a secure fit

This replacement door handle provides a secure grip to open and close the appliance door and restores normal door operation and appearance. Durable molded construction matches the original fit and finish. What it does

• Replaces a cracked, broken or worn door handle to restore safe opening and closing
• Provides a stable grip for pulling the door open or pushing it closed
• Helps maintain proper door alignment and seal by securing the outer door panel
• Fits where the original handle has become loose, damaged or cosmetically worn

• Disconnect power and any water supply before starting work; follow basic appliance safety procedures.
• Handle typically attaches with factory screws or retaining clips—retain original fasteners if possible.
• Inspect mounting area for damage and replace any broken clips or screws for secure installation.

This replacement window is the exterior glass panel that fits the appliance door, restoring visibility and protecting internal components. It gives a clear view inside while helping keep heat, steam, and debris contained during operation. What it does:

• Replaces cracked, chipped, or shattered door glass to restore a clear viewing area
• Protects internal parts from spills, splashes, and cooking residue
• Helps maintain proper cabinet seal and consistent interior conditions
• Reduces heat loss and prevents direct exposure to internal heating elements

• Disconnect power to the appliance and allow all surfaces to fully cool before starting
• Wear cut-resistant gloves and eye protection; handle glass carefully to avoid injury
• Follow manufacturer instructions for removing the door assembly and replacing the glass

This Medallion decorative emblem restores the appliance's factory appearance by replacing a missing, faded, or damaged nameplate. It gives a finished look to the control area or exterior trim. What it does:

• Replaces a worn, cracked, or discolored emblem to improve the appliance's appearance
• Covers the factory logo/label area and restores original styling
• Helps prevent dirt buildup behind a missing trim piece when properly installed
• Matches the OEM shape and finish for a seamless fit

• One Medallion decorative emblem

• Use the factory fasteners or adhesive method shown in your appliance's parts diagram; refer to the diagram for exact attachment style
• Disconnect power to the appliance before attempting any repair that requires removing trim or control panels
• Handle carefully to avoid scratching the finish; alignment may require gentle pressure or clips to seat properly