Med6100dc0 Parts

Secures dryer wiring to the cabinet to prevent rubbing and interference. Replace if your wire retainer clip is broken, missing, or damaged.

This housing slot heater melts ice and prevents frost buildup inside the appliance housing, helping restore normal airflow and component operation. It's a direct replacement heater element used where ice forms around the housing slot. What it does:

• Provides targeted heat to the housing slot to reduce ice accumulation
• Helps restore proper airflow and circulation by clearing frost/ice blockages
• Commonly replaced when the housing develops repeated ice buildup or intermittent heating
• Works as part of the defrost/anti-ice system to protect internal components

• Disconnect power to the appliance before servicing to avoid electrical shock
• Access typically requires removing exterior panels or trim; keep fasteners organized
• Handle the heater element and wiring with care to avoid damage to the element or connector

The Switch Mounting Screw is an OEM part compatible with Whirlpool washing machines. This screw securely mounts the cycle selector switch within the control console assembly. Proper fastening ensures dependable operation of control functions.  

Causes of a bad mounting screw can stem from stress cracks developing over multiple years of operation. Vibrations accumulate, slowly loosening connections housed in a wet environment.

Symptoms of a bad mounting screw include:

• Loose or rattling switch within the console face  
• Difficulty selecting cycles as buttons wobble out of place
• Water intrusion hastening corrosion of electrical terminals
• Potential shock hazards if live connections are exposed

This Whirlpool replacement screw restores a tight mounting point. It is compatible with brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Replacement name plate that restores your appliance's identification label. Needed when the original plate is faded, damaged, or missing.

Replaces the cabinet back panel on your dryer. Needed when the original is cracked, damaged, or missing. Covers internal components and restores enclosure.

This 5-foot flexible aluminum vent hose is a bendable, accordion-style exhaust duct that connects your dryer's exhaust outlet to the wall vent, allowing for easy routing around obstacles in tight laundry spaces. The flexible design lets you position the dryer close to the wall even when the vent connection is not perfectly aligned. Replace this hose if it is crushed, torn, or disconnected, as a damaged hose can cause poor drying performance, excess heat buildup, or a lint fire hazard.

This inner oven door glass provides a clear, heat-resistant viewing panel so you can monitor cooking without opening the door. Restores the oven door's visibility and helps maintain proper oven sealing when installed correctly. What it does:

• Replaces the inner glass panel that fits inside the oven door assembly.
• Allows safe viewing of food while helping the door retain heat.
• Commonly replaced when glass is cracked, chipped, or fogged.
• Helps prevent heat loss and supports proper oven operation when intact.

• One inner oven door glass panel (single piece as shown)

• Handle carefully—tempered glass can shatter if dropped or struck.
• Follow the oven manufacturer's service manual for disassembly/reassembly steps.
• Disconnect power to the appliance before beginning any repair.
• If clips, gaskets, or mounting hardware are damaged, replace them as needed.

Secures panels, brackets, and trim in dryers, washers, and ice makers. Replace worn, stripped, or missing screws to restore proper fit and alignment.

Screw for control panel.

Adjustable periscope vent for dryers with limited clearance. Installs between dryer exhaust and wall port. Replace if cracked, damaged, or missing.

This electronic control board manages the dryer's cycle settings, timing, and sensor inputs. It communicates with components such as the motor, heating element, and moisture sensors to regulate drying operations. Replace this board if the dryer fails to start, stops mid-cycle, displays error codes, or if the control panel buttons become unresponsive.

Self-drilling screw secures panels, brackets, and trim without pre-drilling. Replace missing or stripped screws during appliance repair or reassembly.

White plastic hole plug for dryer cabinet panels. Covers unused mounting holes for a clean finish. Replace when missing, cracked, or discolored.

Size: 6 foot long. Washers not included. This is one hose, for a set with washers order 285363. For inlet hose screen use 285452A and for inlet hose washers use 285448A

Molded elbow connector that redirects dryer exhaust to your home vent duct. Replace if cracked, loose, or leaking to restore a secure connection.

This metal hose clamp secures flexible water or drain hoses to fittings to help prevent leaks and hose detachment. It's a compact replacement part for appliances that use band or spring-style clamps on hose connections. What it does:

• Holds a hose firmly on a barb or nipple to maintain a watertight connection
• Prevents leaks or dripping at hose junctions caused by loose fittings
• Reduces hose movement and vibration that can lead to wear or disconnection
• Works wherever a small appliance hose clamp is required

• Turn off and unplug the appliance and shut off water supply before starting
• Release hose pressure and drain residual water before removing the old clamp
• Use appropriate pliers or a screwdriver for the clamp type; avoid over-tightening