Med7900sq Parts

Molded elbow connector that redirects dryer vent hose routing at an angle. Replace if cracked, broken, or missing to restore proper airflow alignment.

Seals unused factory or service holes on your dryer cabinet or liner. Restores a clean appearance and keeps dust out. Replace if cracked, broken, or missing.

Hex head sheet metal screw secures appliance panels, brackets, and trim. Replace missing, stripped, or damaged screws to keep covers firmly attached.

This is the main drum assembly for a dryer, the large cylindrical chamber where clothes tumble during the drying cycle. It rotates to circulate garments through heated air for even drying. Replace this drum if it has developed cracks, dents, worn spots that snag clothing, or if the interior coating is peeling or damaged.

Replacement 4PH 2371 drive belt for residential dryers. Restores proper drum rotation and tumble so clothes dry evenly while reducing slipping, squealing, or burning-rubber odors caused by a worn or broken belt. What it does:

• Transfers motor power to rotate the dryer drum for normal tumbling.
• Replace if the drum won't turn, slips under load, squeals, or you notice a burning-rubber smell.
• For appliances that use a 4PH-2371 style drive belt—verify model fit before ordering.
• Helps prevent further wear to the drive system when installed with worn components inspected.

• Always disconnect electrical power (and gas supply if applicable) before starting service.
• Follow the appliance service manual for correct belt routing and proper tensioning.
• Inspect the idler pulley, motor shaft, drum glides, and support rollers; replace any worn parts while accessible.
• After installation, restore power and run a short test cycle to ensure smooth, even drum rotation.

Directs exhaust airflow from your dryer to the external vent. Replace this duct pipe if worn, damaged, cracked, or missing to restore proper ventilation.

Right-angle wall elbow redirects your dryer vent through wall openings. Replace worn, damaged, or misaligned elbows to maintain secure exhaust alignment.

This rubber bumper cushions the front panel of your washing machine during operation. It absorbs vibrations and prevents the panel from rattling or making noise during wash cycles. Replace it if your washer's front panel vibrates excessively or makes banging sounds.

Dryer drum seal prevents heat loss and improves efficiency. Replace if you notice excessive lint, reduced drying performance, or visible wear. Confirm fit with your model number.

Replacement top panel for dryer cabinet. Restores the outer cover and protects internal components. Needed when original is cracked, dented, or damaged.

This hose kit replaces worn or damaged appliance hoses to restore proper water flow and prevent leaks. It's a direct-fit replacement for compatible Whirlpool systems and helps stop visible leaks and restore normal fill/drain operation. What it does

• Replaces cracked, split or leaking hoses to stop water loss and reduce risk of appliance damage
• Restores reliable water flow for filling and draining functions
• Helps eliminate poor draining, intermittent filling, or water pooling near the appliance
• Works with existing clamps and connections when installed correctly

• Disconnect power and shut off the water supply before starting any repair
• Inspect connection fittings and replace clamps if worn; ensure a snug, leak-free fit
• Route hoses without kinks and secure to avoid chafing or strain
• After installation, run a short cycle and check all connections for leaks

This is the socket that holds the drum light bulb inside the dryer. It provides the electrical connection to power the interior light that illuminates the drum when the door is opened. Replace this socket if the dryer drum light does not turn on even with a new bulb, or if the socket appears melted, cracked, or has damaged electrical contacts.

Dryer door assembly restores proper closure and appearance when original is cracked, dented, or damaged. Includes mounting surface for seals and handles. Confirm fit with your model number before ordering.

The Riser is an OEM part for GE electric dryers. It is a vertical stand located at the rear of the dryer that elevates the appliance for proper airflow and venting. The riser ensures the dryer exhaust can efficiently exit out the back of the machine.

Causes of a bad riser can include cracks or breaks developing from the repeated lifting of the dryer for cleaning or maintenance. Over time, normal usage and weight of the dryer can also cause weakening. 

Symptoms of a bad riser include:

• Inability to safely lift or tilt the dryer for cleaning  
• Potential for exhaust vent blockage issues
• Increased risk of accidental tipping if riser stability is compromised
• Difficulty leveling the dryer which impacts the operation

Compatible models also include some Hotpoint, RCA, and select Kenmore dryers manufactured for Sears. Replace yours now for safe and reliable operation.
 

Fix a dryer that won't fill or leaks water with a new water inlet valve. Controls water flow to steam dryers. Moderate DIY repair in 30-45 minutes.

This blower housing assembly replaces the blower chamber that supports the blower wheel and routes air through the dryer for proper tumbling and drying. Restores correct airflow and helps reduce overheating or poor drying performance. What it does:

• Houses and supports the blower wheel to direct airflow from the drum to the exhaust.
• Ensures proper airflow for consistent drying and venting.
• Can address symptoms like weak airflow, long dry times, or unusual blower noise when damaged or cracked.
• Works with the blower wheel and motor to maintain lint passage and exhaust flow.

• Disconnect power before inspecting or replacing the blower housing; follow manufacturer safety procedures.
• Access may require removing the dryer front or rear panel depending on model.
• Inspect the blower wheel and motor for damage or obstructions while replacing the housing.