Mfi2266aew Parts

Color: clear. Measures about 11 inches wide by 7 inches high.

This is a right-side shelf support hook that mounts inside the refrigerator compartment and holds adjustable shelves in place. It clips or snaps into slots on the interior wall to provide a ledge for the shelf to rest on. Replace this part if a shelf is sagging, tilting, or won't stay in position due to a broken or missing support clip.

Fix a sagging or loose refrigerator shelf with this left-side hook. Restores proper support and alignment for crisper and glass shelves. Easy DIY fix.

Replace a cracked, broken, or missing dairy tray on your refrigerator door. This bin installs on the door to organize butter and small items in one spot.

The Screw is an OEM part for Whirlpool refrigerators. This screw secures the refrigerator door hinge in place, allowing the door operates smoothly and seals properly. 

Over time, screws can become loose or go missing during repairs or adjustments, which can lead to a misaligned door, compromised sealing, and increased energy consumption. 

Symptoms of a bad screw include:

• The refrigerator door seems misaligned or does not close properly.
• Increased effort needed to open or close the door.
• Unusual gaps around the door seal when closed.
• The door might squeak or make other noises during operation.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Front grille covers the lower front of your refrigerator, providing a finished look and guiding airflow. Replace if cracked, broken, or missing tabs.

Support brace that stabilizes the crisper drawer shelf in your refrigerator's fresh food section. Replace if cracked, broken, or missing to keep drawers aligned.

Left-hand crisper support mounts inside your refrigerator to hold the crisper shelf and guide the drawer. Replace when cracked, broken, or worn for stability.

This replacement screw secures panels, brackets, and components inside appliances. Replacing a missing or stripped fastener restores a snug, rattle-free fit using the correct #8-18 thread and 5/8-inch length.

• Fastens covers, trims, brackets, and internal parts to the cabinet/frame
• Used wherever a #8-18 x 5/8 screw is specified
• Replace if the original is missing, corroded, stripped, or will not tighten
• Symptoms: loose or rattling panels, gaps, or hardware that backs out

• Disconnect power; shut off gas/water before servicing
• Match thread and length; start by hand to avoid cross-threading
• Use the correct driver bit and tighten snugly—do not overtighten
• Inspect and replace damaged clips or tabs before securing

Freezer running too warm or too cold? This thermistor cover shields the temperature sensor for accurate cooling. Simple snap-in installation fixes misreads.

Factory-style replacement screw for securing appliance components. Restores a tight, rattle-free fit for brackets, panels, trims, or covers when the original hardware is missing, stripped, or corroded, helping keep assemblies aligned and secure.

• Fastens components to keep panels, brackets, and trim firmly in place
• Replaces missing, stripped, or rusted hardware that can cause looseness or rattling
• Helps restore proper alignment of parts that won't stay secured
• Useful after service when original fasteners are damaged or lost

• Disconnect power before servicing; shut off water supply if applicable
• Start threads by hand to avoid cross-threading; use the correct driver
• Tighten snugly—do not overtighten to prevent stripping or cracking adjoining parts

Bottle with brush. Color: Black. Size: 0.6 fl.oz.

Supports and guides the deli drawer in your refrigerator's fresh food section. Replace if worn, broken, or causing drawer sticking, sagging, or derailment.

This ice dispenser chute extension mounts beneath the freezer-door dispenser opening to guide cubes or crushed ice straight into your glass. Replacing a cracked or missing extension improves dispensing accuracy and helps keep the dispenser area cleaner. What it does:

• Channels ice from the dispenser chute into your cup or bottle
• Helps reduce stray ice pieces and splashing around the dispenser area
• Restores proper reach/clearance for taller containers
• Typical symptoms: missing piece, cracked/broken tabs, ice spilling past the glass

• One black chute extension

• Disconnect power to the refrigerator before servicing
• Open the freezer door; align the extension's tabs with the slots under the ice chute and snap firmly into place
• Do not force the part to avoid damaging tabs or the door liner
• Dispense a small amount of ice to confirm a secure fit and proper alignment

Replaces broken or missing edge trim on refrigerator storage drawer pans. Restores clean appearance and proper fit so the bin seats correctly in the frame.

Right-side crisper cover support mounts to the inner wall and holds up the crisper cover and glass. Replace if cracked, broken, or missing to restore level.