Mgd6230hw Parts

This dryer elbow is the molded duct connector that redirects exhaust from the dryer to the vent duct, helping restore proper airflow and reduce leaks around the outlet. It's a simple replacement for a cracked or loose elbow. What it does:

• Connects the dryer's exhaust outlet to the home vent duct to direct hot, moist air outside
• Replaces cracked, broken, or warped elbows that cause air leaks or rattling
• Helps reduce lint escape and improves exhaust path integrity when fitted properly
• Can eliminate visible gaps or misalignment at the dryer outlet

• One dryer elbow part

• Disconnect power (and gas supply for gas dryers) before servicing; follow all safety warnings
• Remove the dryer from the wall enough to access the outlet; loosen or remove clamps to swap the elbow
• Use appropriate duct clamps or approved tape to secure connections; ensure vent is clear of lint

This touch-up paint bottle restores small chips and scratches on painted appliance surfaces to improve appearance and help protect against rust. Easy-to-apply formula matches common appliance finishes for quick cosmetic repairs. What it does:

• Covers small chips, nicks and surface scratches to improve appearance
• Helps protect exposed metal from moisture and surface corrosion after damage
• Provides a precise application for targeted repairs on doors, panels and trim
• Can be used on painted steel and metal appliance surfaces (test in an inconspicuous area first)

• Clean and dry the repair area; remove loose paint and corrosion before applying
• Shake bottle well and apply sparingly with included applicator or a small brush
• Allow adequate drying time between coats and follow any manufacturer cure instructions on the label
• Wear gloves and work in a well-ventilated area; keep away from open flame and out of reach of children

This dryer vent directs exhaust air from the dryer to the home's venting system to restore proper airflow and help maintain safe drying performance. Use when the original vent is damaged, bent, or missing. What it does:

• Channels hot, moist air from the dryer to the exterior vent to prevent backflow into the laundry area
• Restores proper airflow that can reduce long drying cycles and excess heat buildup
• Helps keep lint and moisture moving out of the cabinet area when used with regular lint-trap maintenance
• Replaces cracked, crushed, or corroded vent parts that cause poor venting

• Disconnect electrical power (and shut off gas supply for gas dryers) before starting any work
• Install only with the correct vent length and profile for your dryer; avoid sharp bends and compressing the duct
• Secure connections with appropriate clamps or fasteners and check for leaks or obstructions after installation
• Clean the lint trap and inspect the vent path regularly to maintain safe operation

The Switch Mounting Screw is an OEM part compatible with Whirlpool washing machines. This screw securely mounts the cycle selector switch within the control console assembly. Proper fastening ensures dependable operation of control functions.  

Causes of a bad mounting screw can stem from stress cracks developing over multiple years of operation. Vibrations accumulate, slowly loosening connections housed in a wet environment.

Symptoms of a bad mounting screw include:

• Loose or rattling switch within the console face  
• Difficulty selecting cycles as buttons wobble out of place
• Water intrusion hastening corrosion of electrical terminals
• Potential shock hazards if live connections are exposed

This Whirlpool replacement screw restores a tight mounting point. It is compatible with brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

(18"- 29")

Approximately 8 feet.

This outer door assembly replaces a damaged or worn outer door panel to restore the appliance's appearance and protect internal door components. It provides a finished exterior surface and mounting support for door hardware. What it does:

• Covers and protects the inner door components from dirt and impact
• Restores a clean, finished appearance when the original panel is dented, cracked, or scratched
• Provides mounting surface for door hardware and trims (handle/hinge interfaces remain supported)
• Helps the door seal and close properly when damaged panels cause alignment issues

• Disconnect power and remove the appliance from service before starting any repair.
• Handle panel edges carefully to avoid cuts and cosmetic damage.
• Some disassembly of the door (trim, inner panel, or hinge fasteners) may be required; keep fasteners organized.
• Follow the manufacturer's service manual for correct alignment and torque to ensure proper door fit and operation.

This connector restores a secure electrical connection between wires in the appliance, helping return reliable power and control to the affected circuit. It's a direct replacement designed to match the OEM fit and function. What it does:

• Joins two or more wires to complete an electrical circuit
• Replaces damaged, corroded, or loose terminals that cause intermittent power or control failures
• Provides a stable connection to reduce arcing and heat build-up at the joint
• Useful when visual damage or burnt insulation is present on the original connector

• Disconnect power to the appliance before servicing to avoid shock or injury
• Confirm wire colors and orientation before removing the old connector to ensure correct reassembly
• Use proper crimping or connector tools per OEM guidance; do not rely on loose twisting or temporary fixes
• If wiring or insulation is damaged beyond the connector, inspect and repair the harness.

This metal hose clamp secures flexible water or drain hoses to fittings to help prevent leaks and hose detachment. It's a compact replacement part for appliances that use band or spring-style clamps on hose connections. What it does:

• Holds a hose firmly on a barb or nipple to maintain a watertight connection
• Prevents leaks or dripping at hose junctions caused by loose fittings
• Reduces hose movement and vibration that can lead to wear or disconnection
• Works wherever a small appliance hose clamp is required

• Turn off and unplug the appliance and shut off water supply before starting
• Release hose pressure and drain residual water before removing the old clamp
• Use appropriate pliers or a screwdriver for the clamp type; avoid over-tightening

This 8 ft flexible exhaust hose directs airflow from the appliance to the home vent, helping maintain proper ventilation and reduce moisture and lint buildup. It's a straightforward replacement for worn or damaged ducting. What it does:

• Channels exhaust air from the appliance to the exterior vent
• Restores proper airflow to help reduce drying times and moisture buildup
• Helps prevent lint accumulation in the appliance exhaust pathway
• Reduces risk of poor performance caused by crushed, torn, or disconnected ducting

• One 8 ft flexible exhaust vent hose

• Disconnect power to the appliance before replacing the vent and follow all safety precautions
• Remove old ducting carefully to avoid scattering lint; clean vent openings before installing the new hose
• Ensure secure clamps or connections at both appliance and wall/roof vent to prevent leaks
• Follow local building codes and venting recommendations for appliance type and location

This periscope extension piece helps position or extend a small duct/vent component inside the appliance so airflow or sensing elements reach the correct location. It's a simple replacement that restores proper alignment and fit. What it does

• Provides a 0.5-inch extension/positioning for an internal vent or sensor tube
• Restores proper clearance and alignment of airflow or sensing components
• Can reduce airflow restriction or misalignment-related symptoms
• Helps resolve intermittent venting, sensor mispositioning, or fitment issues

• One periscope extension piece

• Typical replacement is a simple swap; power off and unplug the appliance before starting
• Remove any access panels needed to reach the original periscope; retain mounting clips or gaskets
• Inspect surrounding parts for damage and replace if worn to ensure proper seal and operation