Mgr7652xx2 Parts

This left inner door liner replaces a cracked, stained, or damaged inner door panel to restore the refrigerator/freezer door interior surface and support door-mounted bins and shelving. It helps maintain a clean, secure mounting surface for door accessories. What it does:

• Replaces the inner door panel to cover insulation and provide a finished interior surface
• Provides mounting points and support for door bins, shelves, and hardware
• Helps prevent cold air leaks by restoring the proper door interior assembly fit
• Addresses symptoms like visible cracks, holes, staining, or loose/misaligned door-mounted storage

• One left door liner

• High-level replacement — may require removing the door, inner trim, and any attached bins or shelves
• Keep fasteners and hardware organized; transfer existing gaskets, clips, and brackets as needed
• Disconnect power to the appliance if working near electrical components or lights

Color: Black

This mini burner valve controls gas flow to a single burner assembly, restoring proper ignition and temperature control for affected burners. Designed for direct replacement to help resolve intermittent or no-heat burner operation. What it does:

• Regulates gas flow to the burner so the burner can ignite and maintain heat
• Commonly replaces valves that cause burners to fail to light or produce weak flame
• Helps eliminate clicking or repeated ignition attempts when valve operation is intermittent
• Works as the control point between the gas manifold and the burner orifices

• One mini burner valve

• Turn off gas supply and electrical power before servicing; follow local codes
• Verify correct valve orientation and secure fittings; do not overtighten connections
• Test for proper operation and leaks after installation

This flame spreader directs and evens the oven burner flame for more uniform heating and improved bake results. Replacement spreaders restore proper flame pattern and help reduce hot spots in the oven cavity. What it does:

• Distributes burner flame across the oven surface to promote even cooking and baking.
• Helps prevent concentrated hot spots that can cause unevenly cooked food.
• Can restore correct flame pattern when the existing baffle is warped, damaged, or missing.
• Supports stable burner operation by shielding and guiding the flame.

• Turn off power to the range and shut off the gas supply before servicing.
• Handle carefully to avoid bending or damaging the baffle; reinstall in the original orientation.
• Use appropriate hand tools and follow the oven's service manual for removal/installation steps.
• After installation, restore gas and power and check burner ignition and for any gas leaks per safety procedures.

The Burner Valve (RR) is an OEM part for Whirlpool ranges. It controls the flow of gas to the rear-right burner, allowing for precise regulation of the flame during cooking. The valve ensures safe and efficient operation by opening and closing as needed to adjust the burner’s heat output.

Over time, burner valves can become faulty due to wear and tear, grease buildup, or internal damage. Exposure to high heat and repeated use may cause the valve to stick, leak, or fail to regulate gas properly. If the valve becomes obstructed or worn out, it can compromise cooking performance and safety.

Symptoms of a bad burner valve include:

• Inconsistent or weak flame
• Gas smell near the burner when turned off
• Difficulty igniting the burner
• The burner not shutting off completely

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This wiring harness connects appliance controls and components to supply power and signals, restoring reliable electrical paths for normal operation. Designed to replace a damaged or worn harness to help resolve intermittent power or control failures. What it does:

• Routes power and signal connections between the control board and key components
• Replaces cracked, frayed, or corroded wires that cause intermittent operation or no power to parts
• Helps stop shorts or blown fuses caused by damaged wiring
• Restores factory wiring layout for correct component communication

• Disconnect power before inspecting or replacing the harness to avoid shock or damage
• Verify connector orientations and secure all crimps or terminals; ensure proper strain relief
• Check for pin corrosion or bent terminals and replace harness if connectors are damaged

This orifice is a small gas flow fitting for a range or cooktop burner that helps regulate fuel delivery for proper flame performance. It restores correct burner operation when the existing orifice is clogged or damaged. What it does:

• Controls the amount of gas delivered to a specific burner for correct combustion
• Helps restore even, steady flame or consistent heat output
• Commonly replaced when burners sputter, produce weak flames, or will not light reliably
• Works as a direct-fit replacement for the matching OEM orifice on compatible gas ranges/cooktops

• One orifice

• Turn off the gas supply and unplug the appliance before beginning service
• Use correct-sized wrenches and avoid overtightening; follow OEM torque if available
• After installation, check all connections for leaks with a soap solution or approved gas leak detector

This control knob replaces a worn, cracked, or stripped stove/oven control interface to restore positive grip and accurate setting selection. It gives a simple, direct replacement to get appliance controls turning smoothly again. What it does:

• Fits onto splined control shafts to allow safe, tactile selection of heat and cycle settings
• Replaces knobs that are loose, cracked, melted, or missing
• Prevents slipping and improves accuracy when changing settings
• Restores a secure, ergonomic surface for manual control

• Disconnect power to the appliance before removing or installing the knob
• Pull the old knob straight off the control shaft; align the splines and push the new knob on until fully seated
• Do not force or hammer the knob onto the shaft; check fit and function before restoring power
• If the control shaft is damaged or the knob does not seat properly, replace the underlying control.

The Drawer Panel is an OEM part for Whirlpool ranges. It is responsible for providing a sleek and finished look to the front of the range drawer, enhancing the overall aesthetic appeal of your kitchen.

A bad drawer panel can occur due to accidental damage, wear and tear, or improper handling. If you notice symptoms such as cracks, dents, or discoloration on the front panel, it may be time to replace it.

Symptoms of a bad drawer front panel include:

• Cracks, dents, or scratches on the front panel
• Discoloration or fading of the panel
• Loose or misaligned fit

Restore your range by replacing the damaged or worn-out drawer front panel with this genuine OEM part.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

Color: Black.

Color: White. Measures about 2 inches in diameter.

This rail base provides the structural support for the refrigerator drawer/rail assembly, restoring smooth drawer alignment and preventing sagging or binding. It's a direct-fit replacement that helps maintain proper drawer operation and cabinet fit. What it does:

• Supports and aligns the drawer/rail assembly so drawers slide smoothly
• Secures the lower rail to the cabinet to prevent shifting or sagging
• Restores proper drawer clearance and prevents sticking or uneven movement
• Addresses symptoms like crooked or loose drawers, binding, or gaps at the drawer edge

• One rail base

• Disconnect power to the appliance before beginning work
• Remove drawer(s) and any trim panels to access the rail area
• Use basic hand tools; avoid overtightening fasteners to prevent damage

This gas orifice is a direct replacement sized for 9K LP applications to restore correct gas flow to a burner. It helps maintain proper flame performance and consistent heating in compatible gas ranges. What it does:

• Regulates gas flow to a burner for correct flame size and heat output
• Helps resolve weak or low flames and difficulty lighting
• Can improve uneven heating or inconsistent burner performance
• Ensures proper operation after conversion to LP when the correct orifice is required

• Shut off gas supply and power to the appliance before starting work
• Replace the orifice using appropriate wrenches; avoid overtightening
• After installation, check all connections and test for gas leaks with a soapy water solution

Color: White. Size: 13 oz. Spray paint primer. can.

This is a genuine replacement screw used to secure appliance components. It provides a simple, reliable fastener for reattaching panels, brackets, or assemblies so parts stay properly mounted and stable during operation. What it does

• Secures panels, trim, brackets or small assemblies in place
• Restores proper fastening where a missing or damaged screw causes loose parts or rattling
• Prevents movement that can lead to noise or misalignment of adjacent components
• Used wherever the original screw was removed or lost during repairs

• One replacement screw

• Use the matching screw head and thread engagement; do not force if it does not seat smoothly
• Tighten until snug—avoid overtightening to prevent stripping or cracking plastic parts
• Disconnect power before working on electrical appliances and follow basic safety precautions
• If original screw was rusted, check mating threads for damage before installing new fastener

This orifice holder assembly secures the burner orifice and helps direct gas flow to the burner for reliable ignition and steady flames. Replacing a worn or damaged holder restores proper burner operation and consistent heat. What it does:

• Holds the burner orifice in the correct position for proper gas flow
• Helps maintain consistent flame size and burner performance
• Can resolve symptoms like weak or uneven flames and difficulty lighting
• Works with the burner and valve to ensure safer, more reliable ignition

• Turn off the gas supply and electrical power before starting any work
• Inspect surrounding gaskets and fittings; replace any damaged seals
• Hand-start threads, then tighten to manufacturer torque; avoid overtightening