Mgr7662ws Parts

Color: Black

This flame spreader directs and evens the oven burner flame for more uniform heating and improved bake results. Replacement spreaders restore proper flame pattern and help reduce hot spots in the oven cavity. What it does:

• Distributes burner flame across the oven surface to promote even cooking and baking.
• Helps prevent concentrated hot spots that can cause unevenly cooked food.
• Can restore correct flame pattern when the existing baffle is warped, damaged, or missing.
• Supports stable burner operation by shielding and guiding the flame.

• Turn off power to the range and shut off the gas supply before servicing.
• Handle carefully to avoid bending or damaging the baffle; reinstall in the original orientation.
• Use appropriate hand tools and follow the oven's service manual for removal/installation steps.
• After installation, restore gas and power and check burner ignition and for any gas leaks per safety procedures.

This control knob replaces a worn, cracked, or stripped stove/oven control interface to restore positive grip and accurate setting selection. It gives a simple, direct replacement to get appliance controls turning smoothly again. What it does:

• Fits onto splined control shafts to allow safe, tactile selection of heat and cycle settings
• Replaces knobs that are loose, cracked, melted, or missing
• Prevents slipping and improves accuracy when changing settings
• Restores a secure, ergonomic surface for manual control

• Disconnect power to the appliance before removing or installing the knob
• Pull the old knob straight off the control shaft; align the splines and push the new knob on until fully seated
• Do not force or hammer the knob onto the shaft; check fit and function before restoring power
• If the control shaft is damaged or the knob does not seat properly, replace the underlying control.

This drawer panel replaces a damaged or worn front panel on compatible Whirlpool refrigerator drawers to restore appearance and proper closure. It provides a like-for-like cosmetic and structural replacement for cracked, dented, or broken drawer fronts. What it does:

• Replaces a cracked, dented or broken drawer front to restore a clean appearance
• Helps the drawer seal and slide properly by restoring the front face and mounting surface
• Eliminates sharp edges and cosmetic damage that can catch on clothing or food packaging
• Matches the OEM shape so factory hardware and trim align correctly

• One replacement drawer panel

• Remove drawer and contents before starting; handle panel carefully to avoid damage
• Use original mounting screws and hardware; confirm any trim or clips are present before final assembly
• Wear gloves to protect hands from sharp edges and to avoid fingerprints on finished surfaces

This surface burner orifice holder is intended for use with gas ranges. This piece supplies gas to the burner. It also has a spark igniter electrode, so when the burner is turned on it will light. If there are problems with this piece, the gas will not get to the burner, and there could be a leak that may become dangerous. When there are issues, this part should be replaced immediately.This surface burner orifice holder is made from metal and should last a long time. However, there is a chance that it could become damaged or corroded over time or because of an accident with the range. The owner should always make sure to turn off the gas before working on the range, including the burner orifice holder.This surface burner orifice holder is compatible with many models of ranges from Maytag, Amana, Estate, and Whirlpool. This is a genuine OEM replacement part that has been sourced directly from the manufacturer. The holder is sold individually.

This burner baffle sits under the cooktop burner to direct heat and protect surrounding components, helping maintain even flame distribution and preventing debris from falling into the burner area. What it does:

• Shields the area under the burner from spills, grease and food debris.
• Helps route heat and combustion gases away from sensitive components.
• Supports stable burner operation and consistent heating performance.
• Commonly replaced when warped, corroded or damaged by spills.

• Turn off gas and power to the appliance before servicing; follow all safety precautions.
• Remove burner grates and caps to access the baffle; use basic hand tools.
• Inspect surrounding components (burner head, igniter) while the baffle is removed.

Color: Black

Color: White  Note: Right side endcap

Color: White. Size: 1 qt. can. Acrylic appliance paint.

Color: Biscuit.

Color: White  Note: Left side endcap

This replacement drawer panel restores the finished front of your appliance drawer so it looks and functions like new. It replaces a cracked, dented, or scratched front and helps the drawer seal and slide properly. What it does:

• Replaces a damaged or cosmetically worn drawer front to restore appearance
• Provides a proper mounting surface so the drawer closes and opens smoothly
• Helps maintain drawer alignment and fit against surrounding trim
• Matches original fit and attachment points for an easy swap when hardware is transferred

• Disconnect power or follow the appliance safety shutoff procedure before starting
• Remove the drawer and transfer any original mounting clips, brackets, or screws to the new panel
• Handle edges carefully to avoid damage; use appropriate tools and support the drawer during reassembly
• Refer to your model's service instructions for exact disassembly and reassembly steps

This kit includes four brown burner caps designed to replace worn or damaged caps on compatible gas cooktop burners, restoring even flame coverage and appearance. Ideal for damaged, chipped, or discolored caps. What it does:

• Covers the burner head to help direct flame for proper heating
• Restores a finished look to the cooktop where caps are cracked, chipped, or missing
• Helps maintain consistent burner performance by seating correctly over the burner
• Designed to work with the matching burner base and burner head components

• Turn off gas supply and power to the range before servicing
• Remove grates and existing caps, then seat new caps over the burner heads
• Ensure caps sit flat and centered before testing burners; do not force into place