Mgr7762ws3 Parts

Color: White

This burner baffle sits under the cooktop burner to direct heat and protect surrounding components, helping maintain even flame distribution and preventing debris from falling into the burner area. What it does:

• Shields the area under the burner from spills, grease and food debris.
• Helps route heat and combustion gases away from sensitive components.
• Supports stable burner operation and consistent heating performance.
• Commonly replaced when warped, corroded or damaged by spills.

• Turn off gas and power to the appliance before servicing; follow all safety precautions.
• Remove burner grates and caps to access the baffle; use basic hand tools.
• Inspect surrounding components (burner head, igniter) while the baffle is removed.

This is a genuine replacement screw used to fasten panels, trim, and small appliance components. Replacing a damaged or missing screw restores secure mounting and reduces vibration or rattling. What it does:

• Secures panels, brackets, or trim pieces to appliance frames or assemblies
• Prevents loose parts that can vibrate, rattle, or misalign controls
• Replaces stripped, corroded, or lost screws to restore proper fit
• Small hardware solution for routine repairs and maintenance

• Use the matching screw hole and thread carefully to avoid cross-threading
• Hand-start the screw, then tighten with the correct driver until snug; do not over-tighten
• Disconnect power and follow appliance safety procedures before accessing internal parts
• Apply penetrating oil and proceed gently if the original screw is corroded or seized

This mounting bracket secures appliance components and panels to keep assemblies aligned and stable, helping prevent rattles and loose parts. It's a simple replacement that restores proper fit and support where the original bracket has failed. What it does:

• Provides rigid support for internal components or exterior panels to maintain alignment
• Stops vibration and rattling caused by a broken or bent bracket
• Restores secure attachment points for screws and fasteners
• Helps prevent additional wear from loose parts moving during operation

• Always unplug the appliance or disconnect power before starting any repair
• Remove necessary access panels to reach the damaged bracket; keep track of fasteners
• Reuse original screws if undamaged; replace stripped or corroded fasteners
• If alignment issues persist after installation, recheck fit and mounting points for damage

Color: Stainless panel w/ Black glass

This gas saddle valve controls and meters gas flow to the burner assembly for proper ignition and operation. Replaces a worn or damaged saddle-style gas valve to restore steady burner performance and safe gas delivery. What it does:

• Mounts to the main gas line and routes regulated gas to the range/oven burner system.
• Provides the correct pressure/flow path for reliable ignition and consistent flame.
• Commonly replaces valves that leak, fail to supply gas, or cause weak/uneven flames.
• Helps stop unwanted gas flow when the valve body is cracked or connections are compromised.

• One saddle-style gas valve (9.5k) as pictured and specified.

• Turn off gas supply and electrical power before attempting any service; verify gas is off with a qualified tester.
• Installation requires basic plumbing skills and proper tools; use approved pipe sealant rated for gas on threaded fittings.
• After installation, check all joints for leaks with a gas leak detector or soapy water and test appliance operation.

A small hex nut used to secure appliance components and fasten threaded studs or bolts. This durable replacement restores proper fastening to stop loose panels, clips or moving parts from vibrating or coming apart. What it does:

• Secures threaded studs, bolts or hardware to keep panels and assemblies in place
• Prevents vibration-caused loosening or rattling during operation
• Restores proper attachment where a missing or stripped nut causes instability
• Simple mechanical fastening—no electrical or electronic function

• One replacement hex nut (quantity: 1)

• Disconnect power and gas before accessing internal components
• Match thread size and fit before installation; use correct mating stud or bolt
• Start threads by hand to avoid cross-threading, then tighten with an appropriate wrench
• Inspect surrounding hardware for wear and replace any damaged fasteners or studs

Color: Grey

This natural-gas orifice controls burner fuel flow so the cooktop or range produces a steady, correct flame for cooking. It replaces a worn or damaged orifice to restore normal burner performance. What it does:

• Regulates natural gas flow to the burner for consistent flame size
• Helps fix low, uneven, or no-flame symptoms at a single burner
• Used when the original orifice is corroded, clogged, or physically damaged
• Works as the metering outlet between the gas valve and burner ports

• Turn off the gas supply and power to the appliance before servicing
• Remove burner cap and grate as needed to access the orifice; handle small parts carefully
• Use appropriate fittings and a leak test after installation; do not overtighten or damage threads

This is a direct-replacement screw used to secure appliance panels, brackets and other small components. It restores proper fastening where the original screw is missing, stripped, or corroded to help reduce rattles and looseness. What it does

• Fastens panels, trim, brackets and similar small appliance parts
• Restores a secure connection when the original fastener is missing or damaged
• Helps stop vibration-related rattling and movement of mounted components
• Matches the original mounting point to maintain proper alignment

• Disconnect power and water before beginning any repair
• Use the correct screwdriver or bit to avoid stripping the head
• Thread carefully and do not overtighten to prevent damage to the mating part
• Replace only with the same part number or equivalent for proper fit

The Wire Harness is an OEM part for Whirlpool ranges. It is an intricate network of electrical wires that distributes power to components like the oven control board, temperature sensor, displays, buttons, lights, and more. Proper operation of these systems relies on an intact and functioning wire harness.  

Causes of a bad wire harness can include cracked insulation, and exposed or severed wires due to stress and movement over time. The harness may also develop shorts, abrasions, or disconnects in wiring due to normal wear and repeated use of the oven door.

Symptoms of a bad wire harness include: 

• Sudden failure of control buttons, lights, or displays
• Unstable or fluctuating oven temperatures 
• Electrical burning smells when the oven is in use
• Intermittent or complete lack of power to oven systems

This Whirlpool replacement part is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore electric ranges.

This replacement screw restores secure fastening for appliance panels and components, helping stop loose parts and rattling so controls and panels stay aligned. Use when original screws are missing, stripped, or damaged. What it does:

• Secures panels, trim, control boards, brackets, or components to the appliance frame
• Stops rattling, vibration noise, and loose or misaligned parts caused by missing or damaged fasteners
• Replaces stripped, corroded, or missing screws to restore proper fit and function
• Matches OEM fit and threading for straightforward hardware replacement when the correct screw is identified

• Turn off power and unplug the appliance before accessing internal components
• Use the correct screwdriver or bit to avoid stripping the head; do not force mismatched drivers
• Tighten until snug—do not overtighten, which can strip threads or crack plastic
• Keep removed hardware organized and verify the replacement screw matches the original before installation